Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹28.0 LAccepted-AOC H NO 1 7 1 79 1 ROAD NO 7 REDDY ENCLAVE TEMPLE ALWAL SECUNDERABAD 500 010 | HYDERABAD | TELANGANA | 500010 | ₹28.0 L Quoted ₹28.8 L | l1 | Accepted-AOC TENDER FOUND LOWEST AND REASONABLE HENCE ACCEPTED |
| 2 | l2₹30.5 L+₹1.7 L (5.77%)Rejected-AOC 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | ₹30.5 L+₹1.7 L (5.77%) | l2 | Rejected-AOC NOT LOWEST |
| 3 | l3₹31.0 L+₹2.2 L (7.64%)Rejected-AOC | ₹31.0 L+₹2.2 L (7.64%) | l3 | Rejected-AOC NOT LOWEST |
| 4 | l4₹32.7 L+₹3.9 L (13.6%)Rejected-AOC 3 7 1 THIMMAPUR LUXETTIPET TELANGANA 504215 | MANCHERIAL | TELANGANA | 504215 | ₹32.7 L+₹3.9 L (13.6%) | l4 | Rejected-AOC NOT LOWEST |
| 5 | l5₹34.1 L+₹5.3 L (18.5%)Rejected-AOC PLOT NO 46 P T COLONY TRIMULGHERRY HYDERABAD TELANGANA 500015 | HYDERABAD | TELANGANA | 500015 | ₹34.1 L+₹5.3 L (18.5%) | l5 | Rejected-AOC NOT LOWEST |
Tender Value
₹49 L
EMD Value
₹1 L
Closing Date
1 Oct 2024, 6:00 pmClosed
SHRI MASUD ALI, IDSE
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
REPAIR REPLACEMENT OF FLOORING, PLUMBING WORKS, SANITARY FITTINGS ETC FOR OTM ACCN OF AOC CENTRE AGE B/R (SOUTH) NO II UNDER GE (SOUTH) SECUNDERABAD
2024_MES_673545_1
GE(S)/SEC/TOKEN-46 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
SECUNDERABAD
For Enlisted contractors class D and above category a (i) and for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD-3
₹1 L
Yes
19 Dec 2024
10 Sept 2024
9 Oct 2024
10 Sept 2024
1 Oct 2024
25 Sept 2024
10 Sept 2024 - 24 Sept 2024
Amount
Demolition of Brick or stone masonry built in cement mortar complete all as specified and as directed.
M & L for brick work with Flyash bricks built in CM 1:6 straight or curved exceeding 6m mean radius complete all as specified and as directed.
Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie complete all as specified and as directed.
M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. incl scaffolding if necessary. complete all as specified and as directed. Note : Patch work upto height 7.50m incl necessary scaffolding.
M & L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding
M & L for Preparation of newly plastered surfaces of wall and applying two coat of Distemper over a coat of cement primer complete all as specified & directed.
M & L for Preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.
M&L for applying three coats of white wash on ceiling over and including a coat of cement primer including preparation of new plastered ceiling surfaces complete all as specified and as directed.
Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified & directed.
Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified complete all as specified & directed.
M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top and bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement as per specification and drawing as per SSR Pt I
S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified & directed.
S & F Aluminium handle 150mm fabricated type complete all as specified & directed.
S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified & directed.
S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.
M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm or 450 x 300x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick plaster on wall in cement mortar 1:4 complete all as specified & directed.
M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.
M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified & directed.
M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and as directed.
M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl renderering 10mm thick for laying floor finishes in CM 1:4.mm
Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as specified and as directed.
Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as specified and as directed.
M & L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base all as specified and directed.
S&F 18-20 mm thick kota stone as in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish and rounding chamfered edges where directed complete all as specified and diirected.
S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed.
S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position in SSR part I inclding dismantaling of existing damaged water tanks.complete all as specified and as directed.
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore
S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed
S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified & directed
S&F 15mm bore Bib taps, chromium plated, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed
S&F 15mm bore stop valve, chromium plated, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed
S&F in repair pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.
Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and as directed..
S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.
S&F PVC (SWR) bends 75mm dia any radius complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius with access door
S&F PVC (SWR) bends 75mm dia any radius with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.
S&Fin repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP piller taps complete all as specified and as directed.
S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe and fixded complete all as specified and as directed.
S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed.
S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and as directed.
M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed..
S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) complete all as specified and as directed.
S&F in repairs 15mm bore concealed type stop cock, PTMT of any colour high pressure scred for iron pipe Min wt 110 gms complete all as specified & directed complete all as specified and as directed.
S&F Swivel shower of PTMT any colour for fixing in repairs with 15mm pipe. Min wt 40 gms complete all as specified and as directed.
S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed.
S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and as directed.
S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded complete all as specified and as directed.
S & F in repair Towel bar cromium plated incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F450024) or equivalent of (Jaquar /Kohler)
S & F in repairs Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures as specified and directed.
S & F in repair Towel ring icromium platedncl all fitting & fixturescomplete all as specified and as directed. (Make : Hindware Cat no : F890004) or equivalent of (Jaquar /Kohler)
S & F in repair Paper Holder with cover cromium plated incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F840009) or equivalent of (Jaquar /Kohler)
S & F in repair EWC of size 69 x 36 x 64 cm incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : 92520 S-30)
S & F in repair Wash Basin size 61 x 51 x 82 cm with Pedestal Complete set incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : 11032) or equivalent of (Jaquar /Kohler)
ATUL ENTERPRISES (BID ID -3114382)
RAGHAVENDRA CONSTRUCTIONS (BID ID -3120323)
GADUSU RAMESH CONTRACTOR (BID ID -3122832)
PARDEEP AND CO (BID ID -3123856)
Sri venkateswara Electricals (BID ID -3118964)
BEEGEE DESIGN SYSTEMS (BID ID -3123031)
KIRAN CONSTRUCTIONS (BID ID -3124223)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .