Construction work of boundary wall and footpath of amusement park in Mann Sarovar Garden Colony Phase-2 in Ward-06 Mohkampur.

Excavtion in foindation in ordinary soil

Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.

M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work.

M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work.

12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire.

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.

Finishing wall with water proof paint

paniting roofs or other iron work in large area with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644+645)

M.S. or iron work in stair case rolling in heavy size

Earth work in filling

S/Laying of 22-4-53mm size stone ballast

Laying sprqading and consolidation of 12 cm

Supplying & fixing 80 mm thick Precast cement concrete I shape inter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness having plan dimention 200x(160+120mm) of op cement, smooth high gloss finish, skid resistant, manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than 40MPa and weight 4.5 kg per no. including cost of meterial, with blanket layer of 4.00cm thick fine sand including labour T& P etc required for proper completion of the work as directed by Engineer-in-charge.

S/Fixing sign board