REPAIR TO FOOTPATH, HARDSTANDING AND MISC EXTERNAL REPAIR WORKS FOR DOMESTIC AREA IN AKASH VIHAR AND REPAIR TO FENCING BOUNDARY WALL AND GATES AT AF STN SURATGARH

Amount

BOQ (REPAIR TO FOOTPATH, HARDSTANDING AND MISC EXTERNAL REPAIR WORKS FOR DOMESTIC AREA IN AKASH VIHAR AND REPAIR TO FENCING BOUNDARY WALL AND GATES AT AF STN SURATGARH.)

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) , complete all as specified and directed.

Demolition of stone slabs/paver block and tiles including subbase of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc.but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft /loose soil complete all as specified and directed.

Removing excavated material nexc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point in soils complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling mass and concrete complete all as specified and directed.

M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

All as per above item No 9 here in before but except bricks (old bricks dismantled under respective item shall be reused after cleaning of old brick) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and fair without using extra cement, complete all as specified and directed.

M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6 to 8mm as directed, mixed with coarse sand and cement in the ratio 1:1:1, finshed even over rendering with under coat 15mm thick cement and sand mortar 1:4, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint in camouflage in multi shade on wall (of approved colour and shade )over one coat of primer, complete all as specified and directed.

Approved moorum/red bajri filling in floor or pavings , laid in layers n exc 15 cm thick spread , levelled and rammed including watering complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

M&L Cement concrete type D2 1:4:8 (40 mm grade agg) 100 mm thick as in sub base of flooring complete all as specified and directed.

M&L for 75 mm thick PCC 1:4: 8 type D-2 (using 40 mm graded stone aggregate ) as in sub base of floor/tiles etc complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4, type B1, using 20mm graded crushed stone aggregate as in floor finished, surface finished even and smooth without using extra cement including making joint in blocks not more than 10 sqm and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness , M-35 Grade , with grey cement and pigment any shape and size as approved by GE, laid over and including 25 mm thick sand cushion consolidated properly before and after laying of paver block complete all as specified and directed.

All as per here-in-before item no 19 above but colour rubberised factory made, machine pressed interlocking paver blocks complete all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness , M-40 Grade , with grey cement and pigment any shape and size as approved by GE, laid over and including 25 mm thick sand cushion consolidated properly before and after laying of paver block complete all as specified and directed.

Fixing only retrieved concrete interlocking tiles/paver block any shape and size with grey cement and no pigment laid over and including 25 mm thick sand cushioning consolidated properly before and after laying of paver block complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using (12.5mm graded aggregate ) as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer complete all as specified.

M&L for Parking floor coloured heavy duty vitrified tiles (Square/rectangular ) polished, area of each tiles exceeding 0.06 Sqm but n exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer complete all as specified and directed.

M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in sides of rounded or chamfered on edges, coping etc complete all as specified and directed

S&F in repair 35 mm thick Precast cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) designer Jafri Wall Jallie as per sample, area of each not exc 0.50 Sqm fixed on wall in cement mortar 1:4 including two coats of cement base paint in camouflaging patterns to match the shade with old jafri, complete all as specified and directed.

S&F in repair Precast reinforced cement concrete 1:2:4, type B-1 (Using 20mm graded stone aggregate )designer pillars of size 100mm X 100mm and 900mm long including all mouldings but excluding frame set in cement mortar (1:4) etc, complete all as specified and directed.

Dismantling of fencing post/strut of any description (wood/steel or RCC) including taking out embedded portion in concrete and making good to disturbed surface, complete all as specified and directed by Engr-in-Charge.

Excavation in post holes(or similar holes) each in n exc. 0.50 cum getting out returning,filling and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil out of defence land and making good surface complete all as specified & directed.

M&L for PCC(1:3:6) type C2 (40mm graded stone aggregate) filling in post holes, foundation, surface channels and drains and other similar work complete all as specified & directed.

S&F Mild steel angle iron fencing posts and struts in fencing including necessary cutting , drilling , welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-290-0 or Gde-165 complete all as specified and directed by Engr-in-Charge.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and straining and fixing to posts of any type including securing or tying at crossing with and provision of GI wire , staples or steel pins etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs MS chain link fencing 10 guage thick galvanised steel wire and 75mm x 75mm size mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified and directed by Engineer-in-Charge .

S&F Mild Steel work in flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-charge

S&F mild steel round bars 10 mm dia and over cut ot length bent to shape including cranking bending etc. binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-charge

S&F mild steel bolt purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30 cm long and dia of neck n.exc 12 mm complete all as specified and directed by Engineer-in-charge

M & L for Prepration of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for preparing new surfaces of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge

M&L Stainless Steel (304 Grade) sections like hollow tubes, angles. flats, brackets etc in any shape and size with and including SS screws/fasteners etc including all type machine work like cutting, belding, bending, moulding, grinding, polishing, buffring etc to get required shape and size fixed in railing and other similar etc. work at deck, Bridge, Stairs, Entrance, Swimming Pools, etc.any color like Silver, Metallic Grey etc corrosion Resistant design and pattern approved by Garrison Engineer complete all as specified and directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

H S BUILDERS

AK CONSTRUCTION

M/S Shree Ram Enterprises