REPAIR TO HARDSTANDING , PATH, DRAIN, CULVERT IN QUEENS ROAD AREA IN ZONE-III UNDER GE (S) JAIPUR AT JAIPUR MIL STN

Amount

Demolition of PCC of any description and in any position not therwise specifically provided for complete

Demolition of stone/brick masonary built in cement mortar or cement lime mortar

Taking down cement or cement/ lime plaster, any description

M&L PCC(1:3:6), Type C-1, using 20 mm graded Stone aggregate in surfaces channel or drains

M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6

All as per item No. 5 above but except bricks. (Note: Serviceable brick obtained from item No. 2 above will be reused)

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:4)

All as per item No. 7 above but except stone. (Note: Serviceable stone obtained from item No. 2 above will be reused)

M&L for rendering 15 mm th in cm 1:4 on fair face of brick/concrete surfaces finished even and smooth without using extra cement.

All as per item No. 9 above but on stone masonry surface or other than fair face of brick work.

Demolition PCC in ground floors and pavings n exc 15 CM thickness (below above ground level

M&L for hard core of broken bricks of gauge n. exc 63 mm, deposited spread leveled in layers n. exc 15 cm thick, watered and well rammed to a true surface all specified and as directed.

M&L 75mm thick PCC 1:4:8type D2using 40mm graded stone aggregate as in sub base to floor all as specified and directed by Engineer-in-charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, set, jointed over and including 25 mm thick compacting bed of fine sand cushoning all as directed by Engineer-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L Chequered cement concrete tiles 20xcmx20cmx25mm thick , set , jointed and pointed in neat cement slurry in floor with grey cement and pigmentst to match.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar .

M&L Machine cut kota stone slab flooring 20-25 mm thick over and including 15 mm thick screed bed in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M &L Providing precast cement concrete louvres and jallies, 40 mm thick type B0 (12.5 mm crushed stone agggate ) set in CM 1:4 (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 21.00 of BOQ)

Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM 1:4

Demolition of RCC as in Roofs, floors, beams, staircases, landing, chajjas and similar suspended work

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

S & F Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as per item no 25, but 6mm to 8mm dia.

M & L RCC 1:2:4 type B1 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Dismantling of 200mm dia reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required

M & L Concrete bed (1:3:6) type C-2, using 40mm graded stone aggregate to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 200mm dia pipes

M & L 200mm dia Reinforced concrete pipes, class NP2, laid and jointed in CM (1:1) complete with collars all as specified and directed

Excavation in Post holes or similar holes each not exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth alround in layers n. exc. 25 cm in Hard/Disintigrated rock

Plain cement concrete1:3:6, type C-2, using 40 mm gde stone agg as in, foundation filling and mass concrete

S&F65mm x 65mmx6mm MS Angle iron fencing posts or tee section fixed independently without connecting plates and similar works conforming to Fe-410-W (Gde-E-250) quality -A, including dismantling existing fencing any type.

M&L for preparation for new steel or iron surfaces of any description , not otherwise described ,exc 10 cm girth and applying two coat of synthetic enameled paint over a coat of red oxide primer complte all as specified and directed

M&L for Galvanised steel wire chain link fencing of 4 mm dia and 100x 100 mm mesh complete fixed to fencing post 2.4 mtr width rolls complete all as specified and directed by Engr in charge. Including removel /dismantling of old chain link fencing .

M&L for MS flat iron 40mmx 6mm size fixed in fencing posts including 6 Nos of holes for fitting of nut and bolts

M&L for nut and bolts hexagonal type of size 65 mm long and 12 mm dia complete

M&L MS round bars 10 mm dia as in Sag bars in chainlink fence cut to length bent to shape and making hooks

M/S Mohan Lal Gupta

M/S Chandra Mohan Bansal

Shiv Construction Company

Bhawani Enterprises

M/s Bhavesh Construction Company

J.J.ENGINEERING

M/s Jai Jinendra Constructions

M/S ROHIT CONSTRUCTION

ABHI CONSTRUCTIONS