REPAIR WORK OF DG SET, TRANSFORMER, GLOW SIGN BOARD, RAISING PUMPS, REPLACEMENT OF PIPE LINES AND OTHER MISC E/M WORKS AT CGDA AND CENTRAD UNDER GE EM BASE HOSPITAL DELHI CANTT-10

Amount

Supply fabricated and fixing in repair (CENTRAD) Heavy Duty Aluminium Self support Folding Stool Type Ladder of 8 ft height fixed on four pole structure with the top aluminium platform of size 400mmX300mm and the Ladder should be Aluminium Alloy light in weight, Fire Proof, Rust Proof fitted with solid non slippery Rubber shoes, side plug and Cap, safety Locks etc and Sides : Aluminium 'C' shape sections of size 66x31.7mmX3mm as per IS:733-1983 temper T-06, Steps : Aluminium 63mm Flat step 2 sides as per IS: 733-1983 temper T-06, step to step distance 12 inch and load bearing capacity of 150 Kg complete as specified and directed by Engr-in-Charge. Make - SK ladders Model No. - SKL-108/Dada Bamboowala / Areo / Godraj

Supply and topup Automotive Gear Oil EP 90 for blower motor for STP Make :- HP or equivalent

Supply and filling Stabilized Bio Nits powder for STP Make :- Techno Economic services

Supply and filling Hypochloride liquid for STP. Make :- Techno Economic services

Supply and filling Amalgazol for STP. Make :- Techno Economic services

Supply only in replacement V Belts of existing size and shape for STP Blower Motors. Make :- Dunlop/Fanner

Supply in replacement Air Filter for STP Blower Make: Techno Economic services

Supply and filling in repair Fluidized/MBBR (Moving Bed Bio film Reactor) special coated PVC Media, Size 22/16 for STP Plant. Make Model No N-22-16 PVC Ion Exchange/ Thermex/ Ureka fobes

Supply connect in repairs flat 3 core copper conductor PVC insulated & PVC sheathed cable 1100 Volts grade of size 4 Sqmm laid in and incl 40 mm dia PVC conduit fixed to wall/ in duct Make: Havells/Finolex/Plaza/Polycab

Supply Only Cow Dung

Supply only in repair Gland packing for pumps. Note: Item No. 2 to 10 will be consumed in plant & machinery of STP on requirement basis by operators.

S&F in repair Electronic Diaphragm ( Made of High Quality fabric Reinforced EPDM) type metering pump Dosing Pump of capacity 4 LPH & PR 5.5 Kg/Sq Cm Max Frequency Strokes per Min 100, Flow Rate I/h 0-6 , Chemical Tank Volume 100 Ltrs with lid including testing complete after necessary connections complete as directed by Engr-in-charge. Make : ION Exchange/Thermex/Ureka Fobes

M&L for over hauling of the compressor of capacity 73 Nm3/hr 73, Head of Blower 0.37 Kg/cm2, 3 HP, 1500 RPM7.5 HP (Make :- Everest Blower, Model No :- M5125) by disconnecting the compressor from motor, opening and replacing following worn out spare parts reassembling complete compressor & refixing in same position & connecting including replacing the rusted nuts, bolts, washers etc and testing complete all as specified and directed. (a) Gear wheel - 02 set (b) Distance Ring - 01 No. (c) Injection Rings - 04 Nos (d) Piston Rings - 16 Nos (c) Pressing Bush - 04 Nos (d) O- Ring - 01 No (e) Oil seal - 01 No (f) Tensioning Element - 02 Nos (g) Upper and Lower Rotor set - 02 Nos (h) Gasket Packing - 02 Nos (i) Oil Level sight glass - 02 Nos (j) Bearing set - 01 Set

Removal of mud / silt, paper waste, rugs, poly packs and foreign material accumulated in the angle iron platform in shafts cleaning of sewage tank with the help of Vacuum pressure cleaner supports vertical stacks of CI / PVC pipes in the above mentioned shafts of the bldg and disposal of the same collected from shaft inside CGDA and disposal to MCD low lying area by private vehicle complete all as directed.

M&L for repairing /servicing the centrifugal Mono block pump set of capacity 2.0 HP (Make :- (No Suggestions) Model No :- KDS-325+) complete with disconnecting the pump from motor, opening the cover, replacement of worn out parts like gland bush, both ball bearings, gland bolts and nuts, gland packing, gasket, water seal etc including repairing the pump shaft by remetalling, grinding, polishing, opening the motor, cutting & removing old and burnt winding wire, rewinding the motor with new super enamelled copper winding wire of suitable size including insulating materials, varnishing and drying, reassembling complete motor & pump, refixing in same position connecting including replacing the rusted nuts, bolts, washers etc and testing complete all as specified and directed.

M&L for rewinding Air compressor Motor of capacity 3.0 HP by dismantling the electric supply, removing the burnt copper winding and rewinding the motor with appropriate gauge of super enamelled superior quality of copper wire, varnishing, heating, replacement of both ball Bearings, reassembling the same and testing complete all as specified and directed.

Supply and installation, testing, commissioning, in repair factory made, CPRI approved, outdoor type feeder piller Box, confirming to IS:5039 with IP-54 protection, made out of 3.15 mm thick CRCA sheet, 415 Volt, 3 phase, 50 HZ supply mounted on and including MS angle section 40 x 40 x 5 mm thick MS frame with front and back openable, double door with provision of locking arrangement dust & vermin proof, gasket, TPN bus bar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specified and directed & Consisting of the following equipments including taking out old unserviceable LT panel from existing position:-

(i) MCCB, 4 Pole, 16 KA, 63 Amps, 415 volts with extended terminals, fixed setting type Make : ABB /Schinder/Siemens - 01 No.

(ii) Solid copper bus bar 200 Amp for 3 phase, 100 Amps for neutral.

(iii) Provn of fully automatic DOL starter with 40 amps TP power contactors, No/Nc Aux contact, O/L relay & SD timer etc for 5 HP submersible pumpset, Make: BCH/ L&T /ABB -01 No.

(vi) Start/Stop push buttons - 01 No. each

(vii) Phase indication -RYB & Motor ON/ OFF/Trip indicating lamps LED type - 06 Nos.

(viii) Control fuse with link -03 Nos Make : Bussmann/ FARAZ/ Siemens

(x) Changeover switch 3 pole, on load type, open execution, 63 Amps of make: BCH/L&T /Siemens / Schneider / ABB/HPL. - 01 No.

(xi) Single phasing preventer- 01 No Make : Minilac/L&T

(xii) MCB 4 pole 10 KA, C Curve -02 Nos & connectors as per reqmt

(xiii) Control wiring shall be carried out with 2.5 sqmm copper wire.

Repairs/ servicing to 750KVA DG set Make Cummins (AT CGDA) with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as per recommended grade & quality and testing for smooth running at rated speed Testing and commissioning complete all as per manufacturer’s specification and as directed consisting replacement of the following parts: Make : Cummins installed at CGDA Note:- Below Items 1.01 to 1.09 will be replace in Servicing of 750 KVA DG Set

Radiator Cleaning/ descaling (CSRAD750TO1010)

Kit fuel filter and ring Cat part No - KIT3238493

Element Lub oil filter Cat Part No - KIT 3238204

Kit Super BYP, Filter Element Cat No - Kit No 3879488

Seal 'O' Ring Cat No - Kit No 3010937

Kit AIR Cleaner Element Cat Part No - Kit 3238665

Connecting hose pipe

Note :- Coolant and Lub oil will be measured and paid separately under relevant items of schedule Srl No 18 respectively.

Repair, preventive and periodical maintenance of DG Set 250 KVA -01 Nos capacity Make : Cummins installed at CGDA including servicing and replacement of following parts testing commissioning etc all as specified and directed :- Note: Below Items 2.01 to 2.19 will be replace in Servicing of 250 KVA DG Set

FAN BELT (PART NO-3911560)

ELEMENT AIR CLEANER (PART NO-3815929)

ELEMENT AIR CLEANER (PART NO-3815928)

LUB OIL FILTER (PART NO-3401544)

COOLANT FILTER (PART NO-4104821)

SEPRATOR FUEL WATER (PART NO-3815424)

TIMING SEAL (PART NO-3038997)

MAIN SEAL (PART NO-4006179)

HOSE PLAIN (PART NO-67185)

HOSE PLAIN (PART NO-63495)

T BOLT CLAMP (PART NO-149437)

OIL PRESSURE S/W (PART NO-3815885)

TEMP S/W (PART NO-3815883)

OIL PRESSURE SENSOR (PART NO-3815882)

SEAL ROCKER LEAVER (PART NO-3905449)

WATER PUMP (PART NO-3045163)

TURBO REPAIR KIT (PART NO-3545399)

FUEL PUMP & INJECTOR REPAIR & CALIBRATION

RADIATOR DESCALLING

Repair, preventive and periodical maintenance of DG Set 160 KVA -01 Nos capacity Make : Kirlosker installed at CGDA including servicing and replacement of following parts testing commissioning etc all as specified and directed :-

Kit Super bypass filter Cat part No - KIT3879488

Kit fuel filter and ring Cat part No - KIT3238493

Element Lub oil filter Cat Part No - KIT 3238204

Hose plane Cat Part No - 63495

Clamp Hose Cat Part No - 43828

Hose plane Cat Part No - 67185

Gasket Valve Cover Cat Part No - 108692

Belt V Cat Part No - 178570

Cable flexible drive Cat Part No - 504473

Cup Injector Cat Part No - 3012536

Control vernier Cat Part No - 3229310

Hose flexible Cat Part No - AK601655T

Hose flexible Cat Part No - AK8065MS

Hose flexible Cat Part No - AK6065SS

Element air cleaner outer Cat Part No - AX1006303

Element air cleaner inner Cat Part No - AX1006302

Kit4L Turbo Repair Cat Part No - 3575210

Hose Clamp Cat Part No - 3030764

Kit barrel plunger Cat Part No - KIT3238195

Asbestos rope

Inlet and outlet valve

Connecting hose pipe

Note :- Coolant and Lub oil will be measured and paid separately under relevant items of schedule Srl No 20 respectively.

Supply and fixing in replacement of fuse base suitable for cylindrical/DIN type HRC/HBC fuse link type 630/400 A for AMF panel for DG Sets of following capacities:-

DG Set 750 KVA - 01 No Cat No SF94437 L&T /Siemens/Schinder

DG Set 160/250 KVA - 01 No cat No SF94435 L&T /Siemens/Schinder

Supply and fixing in replacement of power contactor series CK-3 pole, AC control 600 A Make : GE or Equivalent suitable for AMF panel of DG Sets of following capacity:- Cat No CK10CE311/Legrand/Siemens

DG Set 750 KVA - 01 No cat No CK 10CE311 L&T/Siemens/Schinder

CK -3 Pole 250 Amp for DG Set 250 KVA - 01 No Cat no CK 08CA311 L&T/Siemens/Schinder

S&F in repair Panel indicator 220 V for main ON/OFF indicator complete all as specified & directed. Make: L&T/Siemens/Legrand

S&F in repair single Phase Preventor as per sample Model: VSP-2 Make: Minilec/L&T/Siemens

S&F in repair Engine Starting Relay as per sample at site Make- Minilec/L&T/Siemens

S&F in repair On-Delay timer of 230 VAC, Range: 0 to 30 sec. Make- Cat No ST803280000 L&T/ BCH/Seimens/Legrand

S&F in repair Under Voltage relay 240/415 Volt Cat No SL92720B000/SL92720D000 L&T as per sample at site Make- BCH/Seimens/Legrand

Calibration of injector, PT pump and repair of turbo including minor spare parts installation, testing and commissioning complete of the following DG Sets :-

DG Set 750 KVA - 01 No

DG Set 250 KVA - 02 Nos

DG Set 160 KVA - 01 No

Supply only in repair single core copper conductor PVC insulated unsheathed 100 V grade(FRLS) 56/0.30 flexible 4 sqm all as specified and directed. Make- Finolex/ KEI/ RR Cables

All as per ser Item No 30 above but 6 Sqmm (FRLS) 84/0.30

Supply only inhibitor corrosion (Coolant) green/red suitable for DG Sets 160 KVA to 750 KVA capacity, of make Cummins, Kirloskar and Crompton Greaves all as specified and directed. Make- Servo/IOC/HP

Supply in replacement Lub oil 20W/40 multigrade or suitable for DG Sets 160 KVA to 750 KVA capacity, of make Cummins, Kirloskar and Crompton Greaves all as specified and directed Make- Castrol/Bharat Petroleum/Servo

Supply and fixing in replacement of radiator as per existing make and size of DG set Caterpiller of capacity 250 KVA Make :Caterpiller installed at CENTRAD including necessary fittings i.e radiator hose pipes with clamps, testing and commissioning all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of radiator as per existing make and size of DG set 1150 G Model-KTA of capacity 160 KVA Make : Kirlosker installed at CGDA including necessary fittings i.e radiator hose pipes with clamps, testing and commissioning all as specified and directed by Engr-in-Charge.

Maintenance & repairing of 1.1 KV LT ACB panel, dusting oiling if any, setting of over current and earth fault relay setting all as specified laid and servicing like all mechanical function including replacement of no volt coil tripping device complete all as specified and directed.

Repair to transformer 1000 KVA 11 KV at CGDA to arrest oil leakage. (a) Disconnecting of transformer main supply input & output (b) Opening up, top, cover, taking out transformer oil, (b) Porcelain LT 1.1 KV Brass rod & gasket (brass rod 40mm) - 04 Nos (c) Porcelain HT 11 KV Brass rod & gasket (brass rod 16mm) - 03 Nos (d) Silica Gel and Breather - 01 Nos. (e) Refilling the transformer oil - 70 Ltrs (f) Rubber cork sheet 3'x2'x6'mm - 01 Nos Note:- for item Nos. and transformer oil will be measured and paid separately.

M&L for servicing Tab changer ON Load Servicing, Testing & Calibration 1000 KVA Transformer

M&L in Repair Tab Changer off Load for 1000 KVA Transformer.

M&L in repair Thermostat for Oil Temperature for 1000 KVA Transformer

M&L in repair Thermostat for Weinding Temperature for 1000 KVA Transformer

M&L in repair HT Bushing with insulator for 1000 KVA Transformer

M&L in repair LT Bushing with insulator for 1000 KVA Transformer

M&L in repair Insulation material for 1000 KVA Transformer

Labour for Removing oil leakage from terminal input/output, conservator top cover oil indicator, tab changer, bachhlotz relay (gasket Sheet) packing

M&L filtration of Transformer oil & alike various equipment installed at CGDA through filtration machine to achieve required di-electric strength 50 KVA complete to entire satisfaction of Engr-in-Charge. Note:- (a) Rate quoted for above item is including testing of oil before filtration and after filtration of transformer, OCB & other equipment. (b) Result before filtration & after filtration of oil (Test Certificate) shall be submitted by the contractor to Engr-in-Charge.

Labour of Cleaning of fuel tank made of MS sheet of 750 KVA DG Set of 1000 ltr capacity approx by draining out fuel in a separate container, taking out all silt/ dirt deposition inside the tank, cleaning it completely by manual labour and necessary T&P and refitting and connecting with fuel pipes with DG sets all as per site requirement and directed.

All as per Ser item No. 47 here-in- before but 250 KVA DG Set of 360 ltrs capacity all as directed by Engr-in-Charge.

Supply only in repair battery SMF 12 Volt, 180AH capacity Make Exide Express or equivalent as approved by GE.

Supply only in repair battery charger suitable for 750 KVA DG set with charging capacity 48 Volt DC Make:- TEKNIKA/Kirloskar/Exide

Supply only repair battery lead with stranded copper conductor of size 95/70 sqmm single core PVC insulated flexible 0.6 M long along with battery terminal for positive and stator terminal duly soldered all as directed.

M&L for topping up of transformers/Voltage stabilizer installed at different location CGDA with transformer oil all as directed by Engr-in-Charge. Make:- SAVITA/IOC/POWER

M&L for painting of transformer of capacity 1000 KVA by scrubbing & removing of old paint & re-painting the same by using one coat of synthetic enamel paint of existing colour complete all as specified and directed.

S & F in repairs ammeter digital type 0-100Amp of including necessary connection complete all as directed. Make- L&T/Seimens/Legrand

S & F in repairs volt meter digital type 0-500 volts including necessary connection complete all as specified and directed. Make- L&T/Seimens/Legrand

S & F and replacement of 100 Amp MCCB TPN, 25 KA adjustable thermal setting 0.8-1.0x IN thermal release 80-100 (A) necessary copper cable for & flexible PVC conduit for internal connection for distribution complete all as specified and directed. Make- L&T Cat Part No SL97209000/Seimens/Schinder

All as per item No. 56 above but 125 Amp MCCB TPN 35 KA complete all as specified and directed. Make L&T Cat Part No SL 986070000 /Seimens/Schinder

All as per item No. 56 above but 150/160 Amp MCCB TPN 35 KA complete all as specified and directed. Make- L&T Cat Part No SL 986080000/Seimens/Schinder

All as per item No. 56 above but 200 Amp MCCB TPN 35 KA complete all as specified and directed. Make- Legrand/L&T/Seimens

All as per item No. 56 above but 400 Amp MCCB TPN 35 KA complete all as specified and directed. Make- L&T Cat Part No SL 978840000/Seimens/Schinder

All as per item No. 56 above but 630 Amp MCCB TPN 35 KA complete all as specified and directed. Make- L&T Cat Part No SL 9945320000/Seimens/Schinder

S&F in repair Fan belt suitable for 750/250/160 KVA DG Set Make:- Fenner/Nissan/Arrora

S&F in repair fuel pipe set suitable for 750KVA, 160 KVA, 82.5 KVA, DG set 20 KVA & 10 KVA DG set complete all as specified and directed.

M&L in Repair Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 to 300 sqmm

M&L in Repair Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 to 300 sqmm

Material and labour in repair for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel strip 25 x 4 mm size by means of bolts, nuts, check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 40 mm bore galvanised iron light grade for earth strip protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing of earthing on completion complete all as specified & directed. Note:-Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length.

Supply and fix in replacement of GI strip of size 25 x 4 mm with epoxy insulators and fixing screws etc for earth continuity conductors to test point terminal including taking down old strip all as directed by Engr-in-Charge.

Supply and Laying in Repair Supply and laying cable 300 sqmm 3 core XLPE insulated screened PVC bedded, armoured heavy duty, HT UG electric cable with stranded aluminium conductor 11000 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specified and directed.

Supply and Laying in Repair 6 Sqmm 2 Core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 LT UG electric cable with stranded aluminium conductor 1100 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specified and directed. Make- Havells/Finolex/Polycab

Supply and Laying in Repair 10 Sqmm 2 Core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 LT UG electric cable with stranded aluminium conductor 1100 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specified and directed. Make- Havells/Finolex/Polycab

Supply and Laying in Repair 25 Sqmm 3.5 Core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 LT UG electric cable with stranded aluminium conductor 1100 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specified and directed. Make- Havells/Finolex/Polycab

Supply and Laying in Repair 35 Sqmm 3.5 Core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 LT UG electric cable with stranded aluminium conductor 1100 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specified and directed. Make- Havells/Finolex/Polycab

Supply and Laying in Repair 50 Sqmm 3.5 Core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 LT UG electric cable with stranded aluminium conductor 1100 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specifed and directed. Make- Havells/Finolex/Polycab

Supply and Laying in Repair 120 Sqmm 3.5 Core XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 LT UG electric cable with stranded aluminium conductor 1100 volt grade including lugs, glands etc laid in trenches or fixed on wall or drawn through in GI ipe complete all as specifed and directed. Make- Havells/Finolex/Polycab

Boring holes 2 m deep in soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as directed by Engr-in-Charge

Disconnection of terminal of LT cable and locating, pin point fault in LT cable 1100V grade of any size including to & pro hire charge of special T&P all as directed by Engr-in-Charge.

Disconnection of terminal of HT cable and locating, pin point fault in HT cable 11000V grade of any size including to & pro hire charge of special T&P all as directed by Engr-in-Charge.

Supply & fix in repair 3 core 2.5 sqmm wire multi core flexible copper conductor PVC insulated and sheathed, 1100 volt as per IS 694/1990. Make- RR Cables/Finolex/Havells

Supply & fix in repair 3 core 1.5 sqmm wire multi core flexible copper conductor PVC insulated and sheathed, 1100 volt as per IS 694/1990. Make- RR Cables/Finolex/Havells

Supply & fix in repair 3 core 4 sqmm wire multi core flexible copper conductor PVC insulated and sheathed, 1100 volt as per IS 694/1990. Make- RR Cables/Finolex/Havells

S&F in repair manually operated 800A ACB 50KA confirms to protection through thermal - Magnetic (DN1) & Microprocessor releases, high mechanical and electrical operating life, 100% rated neutral pole, self diagnostic microprocessor based releases with on load testing through test button, inbuilt thermal memory, protection releases conform to EMI/EMC standards (Overload and short circuit protection) Standard breaking capacity 100%,Conforms to IEC 60947-2 Rated current - 630A to 6300A Accurate protection through microprocessor based trip unit Unique ready-to-close interlock for maximum safety Mechanical contact erosion indicator Fully rated upto 55ºC Neutral 100% rated complete all as specified and directed. Make- Seimens/Legrand/Schinder/L&T

All as per item No. 81 above but 2000 Amp ACB 55 KA complete all as specified and directed. Make Legrand/Legrand/Seimens

S&F in repair manually operated 800A ACB 50KA for DG Set protection thermo-magnetic release confirms to protection through thermal - Magnetic (DN1) & Microprocessor, compact and rugged design with inbuilt under voltage protection. Make- Seimens/L&T/Schinder

All as per item No. 82 above but 1250 Amp ACB 50 KA complete all as specified and directed. Make- Legrand/L&T/Seimens

S&F in repair single phase under voltage relay 20-110V AC/DC CT Secondary 5A. Make- L&T Cat No MV12AA00X00/Seimens/Schinder

S&F in repair 3 Phase over current , earth fault relay 20-110V AC/DC 4 No programmable. Make- L&T Cat No MC31AAXX000/Seimens/Schinder

S&F in repair 3 Phase over current , earth fault relay 20-110V AC/DC CT Secondary 5A. Make- L&T Cat No MRP11A50X00 /Seimens/Schinder

Supply only in Repair Rubber mat 1 mtr x 2 mtr x 19 mm (HT), Tensile Strength for Temp (-10 to 55 DEG. C -15N/MM2 (MIN), Elogation at Break For Temp (-10 to 55 DEG. C -250DEG% MIN, Insulation Resistence in water -10,00,000 M ohm (min) Approved by IS 15652/2006, B.I.S+CPRI+ERDA Approved. Make- Joyti

Supply only Rubber mat 1 mtr x 2 mtr x 10 mm (LT) Tensile Strength for Temp (-10 to 55 DEG. C -15N/MM2 (MIN), Elogation at Break For Temp (-10 to 55 DEG. C -250DEG% MIN, Insulation Resistence in water -10,00,000 M ohm (min) Approved by IS 15652/2006, B.I.S+CPRI+ERDA Approved. Make- Joyti

S&F in repair ultra Heavy duty Contactor capacitor duty for Power capacitor in KVAR advance APP technology, lower operating losses 0.35W/KVAR, Make- Seimens/Legrand/ L&T Cat No LTXL

Supply in Repair Hand Gloves seamless suitable for working pressure 1100 Volts and tested up to 11000 Volts .

Supply and Fix in repair Fuel indicator Flexi pipe external DHPP'N' tank for suitable DG Set length of flexible pipe as existing

Supply Fix in repair Exide Powersafe Plus Battery EP 26-12, 12 Volts, Acid Lead battery, dimension 175x175x166(mm)

Supply and fix in repair sign board for installation of size 1 mtr x 0.90 mtr made of ACP sheet with retrofit radium sheet, two Nos of ACP sheet fixed parallel to each other with gap of 20 mm and rest on square shape MS made of sheet 3.00 mm thick square type 2 mtr long two NO leg including radium paint compete in blue colour and making the name of installation, place, under which sub division in white colour with white square border on the both side of plate with grouting and made PCC (1:2:4) foundation by 20 mm graded stone aggregate of size 0.50x0.50x0.75 mtrs complete all as specified and directed by Engr-in-charge.

M&L For Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Exc 500 ltrs to not ecx 1000 ltrs Tank capacity

M&L For Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Exc 1000 ltrs to not ecx 5000 ltrs Tank capacity

S&F in Repair Crimping tool Capacity 50 Sqmm to 630 Sqmm portable Jack Type including die 50 Sqmm to 630 sqmm Make- Dowells cat No JACK SYT 102 R (HY-282)/ Janson/Taparia

M&L dewatering, cleaning of reservoirs with high pressure jet to remove all mosses, algae and dirt and removal of dirty water alongwith sludge machines/industrial vacuum cleaners and disposal of the same to as safe distance including scrubbing of internal surface by steel wire brushing removing the dirt completely using industrial vacuum cleaner and sterilizing the complete internal surface of the tank by using ISI mark grade I bleaching powder and marking the date of cleaning by using synthetic enamel paint in white colour over black background complete all as directed in six stages cleaning process as under for the following:- (i) Dewatering the tank with portable submersible pump set with flow rate of 30,000 ltrs per hr. (ii) Removal of left over dirty water and sludge with special sludge removal pump set having capacity up to 1.7 lakh ltrs per hr. (iii) Cleaning of wall ceiling and floor by high pressure rotary water jet with the help of German equipment which create pressure of 80-120. (iv) Removing of remaining sludge from the floor with the help of industrial vaccum cleaner. (v) Spraying of non toxic biodegraded eco friendly anti bacterial agent certified by a Govt approved lab to disinfect the tank from harmful pathdons. The dose utilise should be as per OECD guide No 432 . (vi) Treatment of inside tank be exposing UV radiation kill the suspended or floating bacterial remaining in the tank

UG reservoir 35000 ltrs capacity

Under Ground Sump of 20,000 ltrs capacity

Under Ground Sump of 65000 ltrs capacity

Taking out unserviceable existing cooling tower and Supply, installation, testing and commissioning of new cooling Tower suitable for 225 TR FRP induced type draught counter flow and all the dimensions and specifications shall be as per manufacturers instructions with electric motor not less than 10 HP, 720 rpm 3 phase 415 volt, Basin material FRP, GI ladder, Eleminator material GI, filling material PVC, water distribution PVC, including connection to pipe line, welding, threading reducer, flange, Dead plat, nuts/bolts with washers complete including commissioning, testing complete all as specified and as directed by Engr-in-Charge. Make:- Mihir/Paharpur/Delta/Advance.

Supply and fixed in repair submersible pump set electric driven 415 volt TP, suitable for 200 mm dia bore well casing pipe complete up to 5WHp including 40 mtrs long submersible cable of size 6 sq mm three core and suitable starter complete or as directed by Engr-in-Charge.

Taking up or down rusted/UNSV GI tubing and connections from trenches including fittings for refixing or removal to stores complete all as directed of the following sizes:-

(a) 50 mm bore

(b) 40 mm bore

(c) 32 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

Note : Earth work if any will be measured & paid separately

13.Supply and lay GI tubing medium grade (ISI marked) including GI fittings like sockets, elbows, bends, Tees, unions, short pieces etc. laid in trench complete all as specified and as directed of size:- Make- Prakash Surya/ Jindal/ Tata Steel

(a) 50 mm bore

(b) 40 mm bore

(c) 32 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f)15 mm bore

14.S&F in repair gun metal gate/glob valve heavy duty (ISI marked) with iron wheel head screwed both ends for iron pipe for the following bore of pipe including testing complete all as specified & directed:- Make- Kirloslar/ Kartar/ Zoloto

(a) 15mm dia

(b) 20mm dia

(c) 25mm dia

(d) 32mm dia

(f) 40mm dia

(e) 50 mm dia

S & F in repair column pipe, GI pipe 40 mm dia heavy duty ISI marked both end threaded and duly welded with heavy duty GI sockets.

lifting & Lowering of existing Submersible pump set and repaired pump set with taking out carefully of 18 Nos. column pipe of 50/80 mm size each length of 3 mtr with flange joints repairing/ welding all as required at site to column pipe and including cable proper fixing with pump set and column pipe and making connection with existing starter all as required at site and as directed by Engr-in-charge. Note:- Flange type with jointing material like nut-bolts, gasket sheet shall be included in item rate.

Supply connect in repairs flat 3 core copper conductor PVC insulated & PVC sheathed cable 1100 Volts grade of size 10 Sqmm laid in and incl 40 mm dia PVC conduit fixed to wall/ in duct. Make: Havells/Finolex/Polycab

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Returning filling in trenches including spreading, overelling, watering and well ramming in layers not exceeding 25 cm.

S&F in replacement for Form Jet water fountain Nozal to suitable size of multiholes jet for exhaust water and connect to water supply line Existing GI with necessary fittings as directed. Following Spare Parts are given below:- (Near Main Office)

(a) Suy and fix Fountain Foam Jet Nozzle having Material Brass With Shine Chrome having ball joint to change the direction of water flow with inlet 25mm and outlet 32mm. ( 08 Nos)

(b)Three stage nozzle having size 25mm and outlet from various nozzles with size 12mm. Material of the nozzle is gun metal brass with shine chrome finish. (01 Nos)

(c) Supply and Fix Submersible Open Well 5 HP Pump having size 65mm*50mm For Better Flow And Effect Of Nozzle. Make- CG /Kiloskar/havells (01 Nos)

(d) M&L Complete Plumbing material required for the fountain. Including UPVC/ fitting & pipe with necessary control valve ETC. All fitting in heavy material. Make- Supreme/Prayag/Astral. (60RM)

(e) Supply and Fix Submersible Nozzle mounted Power LED 27W, 69LED Based Light With IP 68 Rating Full Water Proof For Nozzle. Make- Havell/Philips/MWF/Wipro. (09 Nos)

(f) Supply and fix Module controller For Submersible multiple LED Lights to change the colours of lights. Make- MWF/havells/Philips/Wipro. (01 Nos)

(g) Supply and fix Complete electric work required for the fountain. Including Pumps, Lights, and Control panel & transformers connections. (Individual wire for each light up to Junction Box within seven meter from water body. Make- Havells/Polycab/Finolex

(h) Providing & Fixing Control Panel made of 18 Gauge CRC sheet powder coated with Starter, MCB, volt meter, Amp meter, MCB's, Protection circuits etc and space for step. Make- L&T/Seimens/Schinder

S&F replacement for Geyser Jet water fountain Nozal to suitable size of multiholes jet for exhaust water and connect to water supply line Existing GI with necessary fittings as directed. Following Spare Parts are given below:- ( Main Gate CGDA Complex)

(a) Supply and fix Geysers Jet Nozzle having Material Brass With Shine Chrome having inlet 25mm and outlet 65mm (08 Nos)

(b)Three stage nozzle having size 25mm and outlet from various nozzles with size 12mm. Material of the nozzle is gun metal brass with shine chrome finish. (01 Nos)

(C ) Supply and Fix Submersible Open Well 5 HP Pump having size 65mm*50mm For Better Flow And Effect Of Nozzle. Make CG /Kiloskar/havells(01 Nos)

(d) M&L Complete Plumbing material required for the fountain. Including UPVC/ fitting & pipe with necessary control valve ETC. All fitting in heavy material. Make Supreme/Prayag/Astral.(60RM)

(e) Supply and Fix Submersible Nozzle mounted Power LED 27W, 69LED Based Light With IP 68 Rating Full Water Proof For Nozzle. Make Havell/Philips/MWF/Wipro. (09 Nos)

(f) Supply and fix Module controller For Submersible multiple LED Lights to change the colours of lights. Make MWF/havells/Philips/Wipro. (01 Nos)

(g) Supply and fix Complete electric work required for the fountain. Including Pumps, Lights, and Control panel & transformers connections. (Individual wire for each light up to Junction Box within seven meter from water body. Make Havells/Polycab/Finolex

(h) Providing & Fixing Control Panel made of 18 Gauge CRC sheet powder coated with Starter, MCB, volt meter, Amp meter, MCB's, Protection circuits etc and space for step. Make- L&T/Seimens/Schinder

Supply install commissioning in repair non clog single phase dewatering pump, Vertical Monobloc submersible pump sets, IP 68 Protection class F , BI- directional Mechanical Seal, 1.1 HP DN 50mm,upto 480 LPM with built in thermal overload protection and float switch, free flow impellers, (i) Cast iron- pump casing,(ii) cast iron - impeller, (iii) Rotor Shaft- Chrome Steel. make KSB/CG/Kilosker. Note- Vertical, Suitable for pumping surface water, rain water, waste water containing solids, drainage of sumps liable to flood, agricultural pits and canals.

Supply install commissioning in repair non clog single phase, 240V, dewatering pump, Vertical Monoblock submersible pump sets, IP 68 Protection class F, BI- directional Mechanical Seal, 1 HP/0.75 KW DN 35mm,1.8-10.8m upto 400 LPM with built in thermal overload protection and float switch, free flow impellers. Make- CG Cat No STPM12/KSB/Kilosker

Supply install commissioning in repair Induction Motor Three phase, 415V, 50x40mm, Head -46.0, 3.7KW/5HP, 50 HZ, Make Kirlosker Cat KDS 550++/KSB/Kilosker

Supply install commissioning in repair Centrifugal Monoset Pump Three phase,415V 65x50mm ,RPM -2880,2 pole Head -46.0, 3.7KW/5HP , 50 HZ , Make- CG Cat- MBHH5Z /KSB/Kilosker

Supply install commissioning in repair Vertical in line Pump Three phase 40x40mm, RPM -3000, 2 pole Head -240-130, 0.75KW15HP, 50 HZ, Capacity upto 1400 LPM, Anti -Clockwise as viewed from motor end make CG /KSB/Kilosker.

Supply and fixed in repair submersible pump set electric driven 415 volt TP, suitable for 150/200 mm dia bore well casing pipe complete up to 5WHp including 40 mtrs long submersible cable of size 6 sq mm three core and suitable starter complete or as directed by Engr-in-Charge.

Supply and fixed in repair submersible pump set electric driven 36 Uf 440 volt 2780 RPM, Suitable for 40 mm Dia pipe Head Max 12Mtr, Maximum Discharge 12000 LPH Max Solid Size 38mm up to 1.5 WHP including 10 mtrs long submersible cable of size 2.5 sq mm three core and suitable starter complete or as directed by Engr-in-Charge. Make CG/ Kirlosker/KSB.

Supply only Bosch GSB 13 500 RE KIT Power & hand tool kit (92 Tools) Make- Bosch Cat No GSB 500 RE.

Supply only Blower. Make- Bosch Cat No 0 601 980 4 F 3 Model No GBL800E.

Supply only BI Hexagonal Socket Set (3/4 Sq driver) Make- Taparia HSN Code 8204.

Supply only Allen Key Set. Make- Taperia Cat No AKHI-10.

Supply only Home tool Kit. Make- Taperia Cat No 1021.

Supply only Universal Screw Driver. Make- Taperia Cat No 840.

Supply only Snap off Cuttersr. Make- Taperia Cat No SKE18.

Supply only Universal Sets. Make- Taperia Cat No 1005.

Supply only Measuring Tape 13mmx50m freemans steel leatherette tape.

Supply only Measuring Tape 13mmx5m freemans steel tape. Note Item No 123 to item No 132 will be deposited to MES Store & Taken on charge in T&P Ledger with Receiving Voucher.

Topping up Distilled water for topping up of battery.

Supply in Repair Aluminium lugs for 10 to 25 sqmm.

Supply in Repair Aluminium lugs for 35 to 50 sqmm.

Supply in Repair Aluminium lugs for 70 to 95 sqmm.

Supply in Repair Aluminium lugs for 100 to 300 sqmm.

M P TYAGI ENGINEERS AND CONTRACTORS

M/s Birja Nand

Shiv Enterprises

Flint India

Bidder Name

M P TYAGI ENGINEERS AND CONTRACTORS