8344-REPAIRS TO LOW TENSION EXTERNAL ELECTRIC SUPPLY AND INTERNAL ELECTRIC SUPPLY AND OTHER ELECTRIFICATION WORKS AT VARIOUS LOCATIONS UNDER GE STM

Amount

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of stays & Poles, laying of cables etc and getting out in soft / loose soil all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm using excavated soil all as specified and directed.

Removing excavated material/ surplus soil not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point all as directed.

Supply, lay / spread in trenches, sieving sand including cleaning, spreading, leveling, punning for laying /cushioning of cable all as specified and as directed. Note: Punned thickness shall be measured and paid.

M & L for removing old bricks from trenches and supply, lay in trenches burnt Bricks, old size, Sub class "B" for cable protection all as specified and directed. Note: Broken bricks shall be taken as credit.

Cutting existing bituminous road surfaces to a depth not more than 150mm, and making good the surface with PCC 1:3:6, type C1, using 20mm graded stone aggregate to match to the adjacent surface after laying pipes / cable including removal of debris to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Disconnecting and taking out the old unserviceable LT UG cable in trenches,wall & poles and taken as credit including Laying in trenches / poles / wall etc LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor, 1100 volts grade conforming to IS specifications and of the following sizes:- Note: (a) U/G LT cables shall be issued under Sch "B" free for fixing only. (b) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc, shall be measured and paid separately under relevant item:-

(a) LT UG cable 2 core 16 sqmm

(b) LT UG cable 4 core 16 sqmm

(c) LT UG cable 3.5 core 25 sqmm

(d) LT UG cable 3.5 core 50 sqmm

(e) LT UG cable 3.5 core 70 sqmm

(f) LT UG cable 3.5 core 95 sqmm

(g) LT UG cable 3.5 core 120 sqmm

(h) LT UG cable 3.5 core 185 sqmm

Supply and lay in repairs steel tubes, 'light grade' galvanised, with all fittings; of bore of tube 40mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed.

Supply and lay in repairs steel tubes, 'light grade' galvanised, with all fittings; of bore of tube 80mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed.

Supply and lay in repairs steel tubes, 'light grade' galvanised, with all fittings; of bore of tube 100mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed.

Taking down/ removing the existing UNSV burnt fuse wire/elements any capacity and fixing only the DO Fuse element 11 KV 15 Amps to 32 Amps capacity fuse elements on HT structure:- Note:- Fuse elements 11 KV shall be issued under Sch "B" free for fixing only.

Taking down unserviceable switch gear/ MCCB's any size or capacity from existing LT panel boards & taken as credit and fixing only the following capacity of MCCB's:- Note:- MCCB's shall be issued under Sch "B" free for fixing only.

(a) MCCB 3 pole, upto 35 KA, capacity 63 Amps to 125 Amps

(b) MCCB 4 pole, upto 35 KA, capacity 100 Amps to 125 Amps

(c) MCCB 3 pole, upto 35 KA, capacity 160 Amps to 200 Amps

(d) MCCB 4 pole, upto 35 KA, capacity 160 Amps to 250Amps

Taking down unserviceable pump starter from existing starter panel boards & taken as credit and fixing only the following type of pump motor starter including connectors/cable lugs complete:- Note:- Pump starter shall be issued under Sch "B" free for fixing only.

(a) Motor starter star/delta type AC 3 phase 415 Volts, 50 Hz, 20 HP

(b) Motor starter star/delta type AC 3 phase 415 Volts, 50 Hz, 15 HP

(c) Motor starter star/delta type AC 3 phase 415 Volts, 50 Hz, 7.5 HP

(d) DOL motor starter in SS-enclosure , 7.5HP with 415 Volts

(e) DOL motor starter in SS-enclosure , 1HP with 415 Volts

(f) DOL motor starter in SS-enclosure , 2HP with 415 Volts

Fixing only Supply and fix Cable jointing kit for 11 KV grade cable for heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size:- Note:- Cable joints shall be issued under Sch "B" free for fixing only.

(a) 11 KV 3 Core 95 Sqmm straight through joint kit

(b) 11 KV 3 Core 95 Sqmm outdoor termination joint kit

(c) 11 KV 3 Core 120 Sqmm intdoor termination joint kit

Taking down unserviceable on load change over switch any size or capacity from existing LT panel boards & taken as credit and fixing only the following capacity of On load change over switch:- Note:- On load change over switches shall be issued under Sch "B" free for fixing only.

(a) On load change over switch 4 Pole 32 Amps

(b) On load change over switch 4 Pole 63 Amps

(c) On load change over switch 4 Pole 100 Amps

(d) On load change over switch 4 Pole 200 Amps

Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth ,including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

(a) One light point controlled by one switch

(b) One fan point controlled by one switch and one regulator

(c) One 3 pin 5 Amps switch socket on independent board

(d) One 3 pine 5 amps switch socket on same board alongwith other switches.

(e) One bell point controlled by bell push switch on independent board.

All as per item No 17 herein before but with 4 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.

Taking down carefully by unscrewing from boards/outlet boxes,Modular flus boxes, Modular cover plates/ frames, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.

Fixing only Ceiling rose surface Ceiling rose, 3 phase/PVC/polycarbonate, isolated body.

Fixing only Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.

Fixing only Switch socket combination 2 in 1, 3 pin, 5 amp, flush type all as directed.

Fixing only Socket outlet 3 pin 6 Amps flush type all as directed.

Fixing only Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp multipurpose controlled by one switch

Fixing only stepped type electronic fan regulator flush type all as directed

Fixing only modular Socket, 6A - 2/3 pin combined 2 module

Fixing only modular Socket, 15/16A - 2/3 pin combined 2 module

Fixing only Bell push modular type 5 amps single pole 240 Volts one module

Fixing only modular switch 1 way 6A, 1 module

Fixing only Lamp holder PVC/polycarbonate with back plate for pendant/batten fittings all as directed.

Fixing only modular switch 1 way 16A, 1 module

Fixing only Modular white cover with plate with frame 1 module incl matching with white cement wk if necessary

Fixing only Modular white cover with plate with frame 2 module incl matching with white cement wk if necessary

Fixing only Modular white cover with plate with frame 3 module incl matching with white cement wk if necessary

Fixing only Modular white cover with plate with frame 4 module incl matching with white cement wk if necessary

Fixing only Modular white cover with plate with frame 6 module incl matching with white cement wk if necessary

Fixing only Modular white cover with plate with frame 8 module incl matching with white cement wk if necessary

Fixing only Modular white cover with plate with frame 12 module incl matching with white cement wk if necessary

Fixing only Modular flush box 1 module

Fixing only Modular flush box 2 module

Fixing only Modular flush box 3 module

Fixing only Modular flush box 4 module

Fixing only Modular flush box 6 module

Fixing only Modular flush box 8 module

Fixing only Modular flush box 12 module

Fixing only Modular flush box 16 module

Fixing only Modular flush box 18 module

Fixing only in- replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket including MCB 20A complete incl taking down old one. Note for item Nos.20 to 48:- (a) all above Items shall be issued under Sch "B" , free for fixing only.

Taking down carefully existing un-serviceable main switch, DB's including boards etc, from its original position complete all as directed.

Fixing only in replacement of UNSV MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Fixing only in replacement of UNSV MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Fixing only in replacement of UNSV MCB Distribution board , 430 volts triple pole, double door, sheet steel, 12 ways TPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Fixing Only MCB SP 6Amps to 63 Amps, 230V

Fixing Only MCB SPN 16 Amps to 63Amps 230V

Fixing Only MCB TPN 63 Amps to 400 Amps, 230V

Fixing Only RCCB single pole & neutral, 240 volts, 25 Amps to 63 amps

Fixing Only RCCB 4 pole, 430 volts,25 Amps to 63 amps

Taking down & dismantling following unserviceable items/parts from water heaters of any capacity/make/model, fixing only new items/parts of same capacity/type/model, connecting up and testing :-

(a) Fixing only Thermostat suitable for water heater upto 25liters capacity.

Fixing only LED lights fitting 1x 10 W, 220V,Bulk head fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only LED lights fitting 1x 12 W, 220V, AC decorative round recessed type LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only LED lights fitting 1x 9 W, 220V, AC decorative down lighter recessed type LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only LED lights fitting 1x 15 W, 220V, AC decorative recessed fitting sqare type LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only round shape 10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Note for item Nos 51 to 64 :- (a) all above Items shall be issued under Sch "B" , free for fixing only.

ADITHYA CONSTRUCTION

S.M.ELECTRICALS

PSK Enterprises