Karnataka

Active

Goods

Supply of Water Supply Items To H Malligere Grama panchayath

Rural Development and Panchayat Raj Department

RDPR Gram Panchayat Office H.Malligere TP Mandya | Mandya, Karnataka

Amount: Refer DocsCloses: 8 Jun 20263d left

Tender Value

Refer Docs

EMD Value

₹25,000

Closing Date

8 Jun 2026, 10:30 pm3d left

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Supply of Water Supply Items To H Malligere Grama panchayath

Tender Information

Tender ID

57486

Reference Number

RDPR/2026-27/IND14272/CALL-2

Tender Type

Open

Location

RDPR Gram Panchayat Office H.Malligere TP Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredBidder Shall Upload Udyam Registration Certificate with Valid Udyam Registration Number URN

RequiredBidder should upload Company Registration Certificate

RequiredCertificate of Annual Turnover Issued by Practicing Chartered Accountant

RequiredCompany Registration Certificate

RequiredSmall Scale Industries Certificate

RequiredThe Bidder Must Submit valid OEM / Dealership certificate or Authorization Certificated from OEM

Eligibility Criteria

Tenderers should not be associated, or have been associated in the past, directly or indirectly, with a firm or any of its affiliates which have been engaged by the Purchaser to provide consulting services for the preparation of the design, specifications, and other documents to be used for the procurement of the goods to be purchased under this Invitation of Tenders.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

In case of authorized representative/dealer of a manufacturer-The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document

In case of authorized representative/dealer of a manufacturer -The tenderer, as authorized representative/dealer, has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document

Recent Affidavit declaration at e-stamp must be upload 100rs bond paper

The Employer reserves the rights to Increase or decrease material quantity

The bidder must provide after sales service support for the products and the bidder must have a local service center (Mandya) for the purpose of quick service and warranty claim

Turn over certificate for the last 2 Financial Years with CA Certification and Balance sheet

The Employer reserves the rights to Reject or accept any or all the tenders without assigning any reason

Bidders should abide to all the Terms and Conditions attached

The legal status, place of registration and principal place of business of the company or firm or partnership.

Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.

A detailed description of the essential technical and performance characteristics of the goods.

A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser

Item-by-item commentary on the Purchasers Technical Specifications demonstrating substantial responsiveness of the goods and services to those specifications or a statement of deviations and exceptions to the provisions of the Technical specifications

Technical Criteria

Capabilities of Vendor

Bidder Shall Upload Work Completion Certificates for Similar Works Executed During Last 2 Years

Work Done Certificate

Bidder Shall Upload Work Completion Certificates / Work order Certificates

Work Done Certificate

Financial Status

Copies of GSTR-3B for Last Two Years with Filing Status Shall Be Uploaded by Bidder

GST Registration

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹25,000

Important Dates

Last Activity

28 May 2026

Published

28 May 2026

Bid Opening

9 Jun 2026

Download Ends

2 Jun 2026

BOQ Preview

•

HMM_ Motor rewinding Labour and workshop turning fitting charges

•

HMM_ Motor Lifing Erection and Service Fitting

•

HMM_ Hand pump lifting erection and service

•

HMM_ Starter board wiring electrical service and fitting

•

HMM_ Over tank gatevalve GM rod Lathe Threading Charge and service

•

HMM_ 5 Inch FTA

•

HMM_ 6 Inch FTA

•

HMM_ 5 Inch MTA

•

HMM_ 6 Inch MTA

•

HMM_ 5 Inch PVC Tee

•

HMM_ 6 Inch PVC Tee

•

HMM_ 6 Inch Plain End

•

HMM_ 5 Inch PVC Pipe Bend

•

HMM_ 6 Inch PVC Pipe Bend

•

HMM_ 5 Inch PVC elbow

•

HMM_ 6 Inch PVC elbow

•

HMM_ 5 Inch PVC Pipe

•

HMM_ 6 Inch PVC Pipe

•

HMM_ 5 Inch PVC Collar

•

HMM_ 6 Inch PVC Collar

•

HMM_ 5 Inch Repair Collar

•

HMM_ 6 Inch Repair Collar

•

HMM_ 7.5HP to15HP PREVENTOR

•

HMM_ Relay Unit-Motor

•

HMM_ 6 Inch threaded end cap

•

HMM_ 2 Inch GI Pipe

•

HMM_ Amps Meter

•

HMM_ 2 Inch Bore Clamp

•

HMM_ 2.5 Inch Bore Clamp

•

HMM_ Contactor Unit

•

HMM_ 7 Inch Cassing Pipe

•

HMM_ DOL Starter M

•

HMM_ DOL Starter LTLK

•

HMM_ Electrical Contact Kit

•

HMM_ DOL Electrical Panel Board

•

HMM_ SADA Electrical Panel Board

•

HMM_ 100Amps Fuse Unit

•

HMM_ 63Amps Fuse Unit

•

HMM_ 4Sqmm 3Core Copper Cable Flat type

•

HMM_ No Volt Coil

•

HMM_ 10 Stage Pump

•

HMM_ 12 Stage Pump

•

HMM_ PCV Tape Roll

•

HMM_ 7.5HP PREVENTOR

•

HMM_ Relay LTLK

•

HMM_ 1.2 MM Rewinding copper wire

•

HMM_ Shalk Thrid

•

HMM_ Volt Meter

•

HMM_ 6 HP Motor Pump with 10 Stage

•

HMM_ 7.5 HP Motor Pump with 12 Stage

•

HMM_ Bolt Nut 3by8 Inch

•

HMM_ Bolt Nut 5by8 Inch

•

HMM_ Rotor Bush

•

HMM_ Bucket Washer

•

HMM_ Borewell Handle

•

HMM_ Borewell Head

•

HMM_ Borewell Water Tank

•

HMM_ Borewell Pedestal Stand

•

HMM_ MCB 4 pole

•

HMM_ 1.25 Inch GI Collar Long

•

HMM_ 1.25 Inch GI Pipe

•

HMM_ 0.5 Inch GI Tap

•

HMM_ 0.75 Inch GI Tap

•

HMM_ GM Upper Valve

•

HMM_ GM Lower Valve

•

HMM_ M-12 Boltnuts

•

HMM_ NRV Lather

•

HMM_ Plunger rod 3 meter

•

HMM_ 2HP V4 SM Motor Pump 20Stage

•

HMM_ 3HP V4 SM Motor Pump 30Stage

•

HMM_ 0.75 Inch CPVC Ball Valve

•

HMM_ 1 Inch CPVC Ball Valve

•

HMM_ CPVC Gum 29ml

•

HMM_ 0.75 Inch CPVC Union and Tank Nipple

•

HMM_ 1 Inch CPVC Union and Tank Nipple

•

HMM_ Gargen Pipe 0.75 Inch

•

HMM_ Gargen Pipe 1 Inch

•

HMM_ HDPE End Connector

•

HMM_ 1.25 Inch HDPE Pipe

•

HMM_ 1.5 Inch HDPE Pipe

•

HMM_ 0.5 Inch PVC MTA & FTA & END CAP

•

HMM_ 0.75 Inch PVC MTA & FTA & END CAP

•

HMM_ 1 Inch PVC MTA & FTA & END CAP

•

HMM_ 1.25 Inch PVC MTA & FTA & END CAP

•

HMM_ 1.5 Inch PVC MTA & FTA & END CAP

•

HMM_ 2 Inch PVC MTA & FTA & END CAP

•

HMM_ 2.5 Inch PVC MTA & FTA & END CAP

•

HMM_ 3 Inch PVC MTA & FTA & END CAP

•

HMM_ Stick & Paper

•

HMM_ Solvent Cement 100

•

HMM_ Solvent Cement 50

•

HMM_ Solvent Cement 250

•

HMM_ Thrust bearing & bottom

•

HMM_ 0.75 Inch CPVC Elbow & Collar

•

HMM_ 1 Inch CPVC Elbow & Collar

•

HMM_ 0.75 Inch CPVC Tee, FTA, MTA

•

HMM_ 1 Inch CPVC Tee, FTA, MTA

•

HMM_ 0.75 Inch CPVC Pipe

•

HMM_ 1 Inch CPVC Pipe

•

HMM_ 0.5 Inch PVC Ball Valve

•

HMM_ 0.75 Inch PVC Ball Valve

•

HMM_ 1 Inch PVC Ball Valve

•

HMM_ 1.25 Inch PVC Ball Valve

•

HMM_ 1.5 Inch PVC Ball Valve

•

HMM_ 2 Inch PVC Ball Valve

•

HMM_ 2.5 Inch PVC Ball Valve

•

HMM_ 3 Inch PVC Ball Valve

•

HMM_ 4 Inch PVC Ball Valve

•

HMM_ 2 Inch PVC Joint Collar

•

HMM_ 2.5 Inch PVC Joint Collar

•

HMM_ 3 Inch PVC Joint Collar

•

HMM_ 1 Inch PVC Pipe Collar

•

HMM_ 1.25 Inch PVC Pipe Collar

•

HMM_ 1.5 Inch PVC Pipe Collar

•

HMM_ 2 Inch PVC Pipe Collar

•

HMM_ 2.5 Inch PVC Pipe Collar

•

HMM_ 3 Inch PVC Pipe Collar

•

HMM_ 4 Inch PVC Pipe Collar

•

HMM_ 2 Inch GI Non Return Valve

•

HMM_ 2.5 Inch GI Non Return Valve

•

HMM_ 0.5 Inch GI Pipe Nipple 1 feet

•

HMM_ 0.75 Inch GI Pipe Nipple 1 feet

•

HMM_ 2 Inch GI Pipe Nipple 1mtr

•

HMM_ 0.5 Inch PVC elbow

•

HMM_ 0.75 Inch PVC elbow

•

HMM_ 1 Inch PVC elbow

•

HMM_ 1.25 Inch PVC elbow

•

HMM_ 1.5 Inch PVC elbow

•

HMM_ 2 Inch PVC elbow

•

HMM_ 2.5 Inch PVC elbow

•

HMM_ 3 Inch PVC elbow

•

HMM_ 4 Inch PVC elbow

•

HMM_ 0.5 Inch PVC PIPE

•

HMM_ 0.75 Inch PVC PIPE

•

HMM_ 1 Inch PVC PIPE

•

HMM_ 1.25 Inch PVC PIPE

•

HMM_ 1.5 Inch PVC PIPE

•

HMM_ 2 Inch PVC PIPE

•

HMM_ 2.5 Inch PVC PIPE

•

HMM_ 3 Inch PVC PIPE

•

HMM_ 4 Inch PVC PIPE

•

HMM_ 0.5 Inch PVC Pipe Collar

•

HMM_ 0.75 Inch PVC Pipe Collar

•

HMM_ 1.25 Inch GI Bend

•

HMM_ 2 Inch GI Bend

•

HMM_ 2.5 Inch GI Bend

•

HMM_ 1.25 Inch GI Collar

•

HMM_ 2 Inch GI Collar H or V

•

HMM_ 2.5 Inch GI Collar H or V

•

HMM_ 0.5 Inch GI Elbow & Collar

•

HMM_ 0.75 Inch GI Elbow & Collar

•

HMM_ 0.5 Inch PVC Tee

•

HMM_ 0.75 Inch PVC Tee

•

HMM_ 1 Inch PVC Tee

•

HMM_ 1.25 Inch PVC Tee

•

HMM_ 1.5 Inch PVC Tee

•

HMM_ 2 Inch PVC Tee

•

HMM_ 2.5 Inch PVC Tee

•

HMM_ 3 Inch PVC Tee

•

HMM_ 4 Inch PVC Tee

•

HMM_ 1.25 Inch PVC Pipe Bend

•

HMM_ 1.5 Inch PVC Pipe Bend

•

HMM_ 2 Inch PVC Pipe Bend

•

HMM_ 2.5 Inch PVC Pipe Bend

•

HMM_ 3 Inch PVC Pipe Bend

•

HMM_ 4 Inch PVC Pipe Bend

•

HMM_ 2 Inch Service Saddle 63X20MM

•

HMM_ 2.5 Inch Service Saddle 75X20MM

•

HMM_ 0.5 Inch PVC Pipe Bend

•

HMM_ 0.75 Inch PVC Pipe Bend

•

HMM_ 1 Inch PVC Pipe Bend

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

WS Tender Documents-2.pdf

Tender Document • 2.13 MB

Ready to Participate?

Download all tender documents and submit your bid

Supply of Water Supply Items To H Malligere Grama panchayath

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?