REPAIR/MAINT TO E/M INSTALLATIONS UNDER AOR OF AGE B/R-II OF GE (N) PATIALA

Amount

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F factory made Flush shutters 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete all as specified and directed.

S&F mild steel angle iron work as in doors frames complete all as specified and directed.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown inf SSR complete all as specified and directed.

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm Prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown in SSR complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement (WPC to be measured separately) complete all as specified.

Supply only liquid Water proofing compound complete.

M&L for Rendering 15 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M&L for prepartion of new plastered surfaces of walls and applying two coat of cement based paint on external walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper including applying 0.5 to 1 mm thick white wall care putty (in 1/2 coats as required) complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified

M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy complete all as specified and directed by the Engineer-in Charge.

All as per item No 22 above but one coat of white wash on ceilings complete all as specified and directed by the Engineer-in Charge.

All as per item No 22 above but one coat of oil bound distemper on walls complete all as specified and directed by the Engineer-in Charge.

All as per item No 22 above but one coat of cement based paint on walls complete all as specified and directed by the Engineer-in Charge.

Allas per item no 22 but two coat of Exterior emulsion paint complete all as specified and directed by the Engineer-in Charge.

Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description in any position and location not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge .

Dismantling wrought iron or mild steel work of any description not otherwise provided for purlins, runners etc complete all as specified and directed by the Engineer-in Charge.

Demolition of brick work built in cement mortar complete all as specified and directed by the Engineer-in Charge.

Dismantling Asbestos Cement (corrugated, semi-corrugated,etc.) sheet in roof coverings complete. Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws,complete, all as sepcified and directed. Note : The rates includes rates of scaffolding to work at a height of 10-15m hangars. Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.

Excavating in post holes (or similar holes) as in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by the Engineer-in Charge.

S&F steel work in square pipe/tubular/angle as in post, rafter, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes including distances pieces, base plates, nut bolts etc including complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius bulit in C:M 1:6 complete all as specified and directed by the Engineer-in Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-290 (Gde E165 complete

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M&L for Sheet glas 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane

Dismantling of Barbed wire fencing of any description and in any position complete.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC)

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165

Supply only chainlink fencing any size any type etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

M&L for providing and Laying Premium (1st) quality straight edge, ceramic tiles WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor, 8 to 10 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match including 15mm thick screed bed of CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specially provided for

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in hard standing finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick cement cocnrete type B- 0 1:2:4 (12.5mm graded agg ) as in levelling coarse on hard standing surface complete all as specified and directed

M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified.

M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified.

M&L for 75mm thick PCC (1:5:10) type e-2 using 40mm graded stone aggregate as in Sub base finished even and rough complete all as specified and directed.

M&L for rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 15 mm thick screed bed in 1:4 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required all as specified and directed

ML for 14- 16 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed

S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed

S & F in repairs Mild steel, plain, black sheet 1.60mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for all as specified and directed

M&L for providing factory made precast reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, perforated cover slabs(for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 all as specified and directed

Jawandha Enterprises (BID ID -3481482)

ANIL KUMAR AND CO (BID ID -3486230)

FAVOURITE ENGINEERS (BID ID -3486314)

AR CONSTRUCTIONS (BID ID -3480936)

Arneja Builders (BID ID -3479623)

M/S RAJ KUMAR GUPTA (BID ID -3480938)

KK BUILDERS (BID ID -3486352)