Repair and Reconditioning of 600 HP HSC pump set no.3 at WTP in kabini water supply scheme under mysuru city corporation

Repair and Reconditioning of 600 HP HSC pump set no.3 at WTP in kabini water supply scheme under mysuru city corporation

Removing Horizontal split case single stage , foot mounted Centrifugal pump. The job includes closing suction side and delivery side valves, removing coupling bolts.Lifting upper half case of pump and...

Reconditioning of stuffing box of Driving and Non driving side as to house the gland packing and Latern ring intact with proper clearence. The stuffing box shall have minimum five packing rings plus l...

Gland packing: The job includes supplying high quality Graphite asbestos of suitable size and fixing them to the pump along with the two sets of rings on either side of the centrally located latern ri...

Reconditioning of non-driving side and driving side bearing housing by cleaning the bearing hosing thoroughly and modifying and smoothening the inner surface with white metal and fixing the housing on...

Fixing of rotating element :

The job includes placing the rotating element along with neck rings , coupling key and the coupling half of the centrifugal pump correctly in the lower half of the pump b...

Reconditioning of Shaft and bend removing The job includes transporting the shaft from workshop to the lathe machine site and removing rust from the steel components using "emery" paper thoroughly. Pl...

Pump body packing/Gasket , the job includes supplying the Nitride/Neoprene rubber gasket and fixing the gasket along the body of the pump after making suitable modification according to the shape, Up ...

Supplying and fixing of Stainless Steel/Phosphor bronze material wearing ring of suitable size for Horizontal split case single stage , foot mounted Centrifugal pump so as to form seal against water...

Providing and Fixing of SS410 grade shaft sleeves suitable for shaft of Horizontal split case single stage , foot mounted Centrifugal pump , with sleeve surface having high surface hardness material.T...

Supply and fixing of Pump and Motor Coupling with bushing nut and bolts for Horizontal Split casing Type Pumpset of capacity upto 500 HP by modifying and smoothening the inner surface with white metal...

Supplying and Fixing of Suitable Bearing Reputed Make to Horizontal split case single stage , foot mounted Centrifugal pump, the bearings must be subjected to all type of tests as specified in the rel...

Motor pumpset Alignment:The job includes making pump and motor alignment by using dial guage and spirit level. Adjusting the placement of motor and pump by using existing HOT and crane pulley. "weldin...

Supplying and fixing of Stainless Steel/Phosphor bronze material Impeller Neck ring of suitable size for Horizontal split case single stage , foot mounted Centrifugal pump so as to form seal against...

Repair and Reconditioning by welding and machining impeller suction veins and Dynamic Balancing of Pump Impeller The job includes transporting the impeller unit from workshop to the lathe machine site...

Supply & fixing of suitable water thrower deflector suitable forHorizontal split case single stage , foot mounted Centrifugal pumpof suitable size and shape so as to prevent water from entering bearin...

Supply & fixing of suitable Cast Iron Guide Bush for Horizontal split case single stage , foot mounted Centrifugal pump and fixing on to the Shaft complete including cost of material, labour and HOM ...