Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹17.5 L+₹50,514.50 (2.98%)Rejected-Finance | L2 | Rejected-Finance not being lowest | |
| 3 | L3₹18.6 L+₹1.7 L (9.74%)Rejected-Finance FLAT NO 107 C WING SKYWAYS SERENO LOHEGAON PUNE 411 047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance not being lowest | |
| 4 | L4₹19.6 L+₹2.6 L (15.4%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-Finance not being lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
7 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (CME) Kirkee
Garrison Engineer (CME) Kirkee, Phugewadi, Dapodi, Kendriya vidyalay Gate , beside Unlimited (Mega Mart) Mall, Pune - 411 012
Petty repairs to certain buildings zone IV to VI at CME
2022_MES_520070_2
8301/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (CME) Kirkee
Class D a(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (CME) Kirkee
₹60,000
Yes
14 Jul 2022
24 May 2022
9 Jun 2022
24 May 2022
7 Jun 2022
25 May 2022
60 days
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling stone slab laid bedded and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing and rubbish off the premises all as directed
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggragate as in sub base complete all as specified and directed
M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) and finished even and fair to receive the further treatment complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection including necessary use and waste of formwork complete all as specified and directed.
M&L 100mm thick cement concrete type B-2, 1:2:4(using 40mm graded stone aggregate) and finished even and fair without using extra cement) complete all as specified and directed.
M&L for Forming 12mm thick expansion joint filled with pre formed bitumen filler and top 30mm primed and sealed with sealing compound grade A, thickness of concrete slab 100mm complete all as specified and directed.
Finishing the surface of concrete pavements by brooming complete all as specified and directed.
M&L 25mm thick rough dressed lime stone slab flooring , jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed
M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
M&L 20mm thick granite (of any type) work, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surfaces of size 450x350x7 mm thick set and jointed neat cement slurry incl pointed in white or colour cement to match the shade of tiles, over and incl rendering 15mm thick in cement mortar 1:4 as backing coat complete all as specified & directed.
M&L vitrified ceramic light shade tile 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per item No 15 above, but on vertical surface such as skirting , dado risers of steps, pillasters etc but including 10 mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.
S&F in repair stainless steel sink , made out of 1.00 mm thick sheet for kitchen with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm all as specified and directed. Make: Nirali/Diamond/Blue King/Kingston
S&F in repair 15mm dia fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete as specified and directed by Engr-in-Charge.
Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing or removal all as directed
S&F galvanised tubes 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed
Refixing 15 mm bore old serviceable steel tubing obtained from serial item No.19 above, and connections in new or old position (walls, ceiling, floors, etc) all as specified and directed.
Cutting chases, pinning in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills, sunshades, shelves, lintels etc and cutting chasesfor concealed water tubing and making good, cutting n.exc. 10cm girth in brick walls all as directed.
S&F in repairs vitreous china squatting pan "Orrisa Pattern" size 580x440mm white with integral foot rest including flushing cistern PVC valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets but including flush pipe, trap complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan(pedestal pattern) white (including fixing bolts, flushing cistern PVC valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and provision of flush pipe, plastic seat cover for pedestal pan and CP health faucet including two way angle cock complete all as specified and directed
S&F in repair vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but including brackets, waste coupling and waste pipe including pillar tap 15mm bore dia, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or Cold with long screwed shanks and fly nuts and stop cock cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, crewed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair 15mm dia stop valve chromium fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Demolition of brick work or stone boulder masonry and precast concrete block masonry including all quions, arches,pillars, etc built in cement mortar complete all as specified and directed.
M&L for pre-cast PCC block masonry type C-1, 1:3:6 using 20mm graded stone aggregate exc. 10 cm width and set in CM 1:4 complete all as specified and directed.
M&L walling random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed
All as per item No 30 above, but except stone complete all as specified and directed. Note:- The old serviceable stone obtained from serial item no 28 shall be re used in this item
M&L 15mm thick plastering on block/stone masonry surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L machine cut kota stone slab as in flooring 20-25 mm thick over and including 15mm thick (avg thickness) cement screed in CM 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing(granite finish) etc complete all as specified and directed.
M&L machine cut kota stone slab as in skirting 20-25mm thick in riser of steps, skirting, dado and pillar inclu 15mm thick (avg thickness) rendering in CM 1:4 as backing coat laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing(granite finish) etc complete all as specified and directed.
M&L coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick set pointed with neat cement slurry with grey cement and pigment in floorsover and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed
M&L sand filling 25mm thick below interlocking paver block as cushioning including watering as required.
M & L machine pressed precast cement concrete interlocking paver block with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shade as decided by Engineer-in-Charge. Note : The rate quoted shall deeem to include for spreading and levelling of sand for cushioning.
S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
Dismantling water tanks and removing, capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed.
S&F 1000 ltr. Capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed
Dismantling water tanks and removing ,capacity exc 250 & n.exc 500 ltrs complete all as specified and directed.
S&F 500 ltr. capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed
S&F 750 ltr. capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed
M&L 15mm thick plastering on stone masonry surfaces in CM (1:6) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 4 including taking down plaster of any description on stone walls including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L 15mm thick plastering on stone masonry surfaces in CM (1:4) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 4 including taking down plaster of any description on stone walls including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
S&F for aluminum anodized three track sliding window with two or more shutter with 4 mm thick plain glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catalogue including taking down existing old window of any description complete all as specified and directed.
S&F for aluminum anodized two track sliding window with two or more shutter with 4 mm thick plain glass with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catalogue including taking down existing old window of any description complete all as sspecified and directed.
S&F aluminium colour powder coated anodised door frame with shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colour anodised Top & stile shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002.Make-Jindal (f) Floor spring Make-Sandhu, (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particle board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour) 5mm thick Make : Saint gobain/ modiguard Note: If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge.
S & F in repairs under counter wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling chain and plug waste fittings union and 32mm dia PVC waste pipe 90cm long, all necessary inlet outlet connections complete all as specified and directed. Make : Hindware Cat No. 10065 or equivalent model in Cera /Parryware/ Neycer as approved by GE.
M & L for half stall ceramic urinal pastel coloured of size 720x485x310mm (Make – Hindware Cat No 60006 or equivalent approved make indicated in list of makes in tender) including Urinal toughned glass Partition (including grinding, polishing, rounding/moulding/chamfering edges), brass CP bottle trap, electric operated auto censor flushing arrangements (Make Hindware Cat No.500963 or equivalent approved make indicated in list of makes in tender) complete including taking down old u/s one complete all as specified and directed
M & L for coupled closet (Clover) snow white make Cera including P or S trap alongwith cistern dual flush complete set and soft close plastic seat cover complete all as specified and directed including taking down old wash down water closet pan of any description any size complete all as specified and directed. Make- CERA Cat. No. S1013115 S Trap / P Trap or equivalent model in Parry ware (Super fine), Hindware as approved by GE.
M& L PCC 1:2:4 type B2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed.
M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .
Extra over rates of block board or veneered particle board for external teak wood 18/19mm lipping 6mm thick fixed with nails all as specified and directed.
M&L 5mm thick rendering on concrete surface in CM 1:3 including taking down existing plaster complete all as specified and directed.
M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.
M&L Preparation of newly plastered or unplastered surfaces on wall surfaces and applying complete wall with 3mm POP/Birla putty for making smooth surfaces and applying two coats of exterior emulsion paint 100% acrylic over a coat of primer as per manufacturers instruction complete all specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying complete ceiling with 3mm POP/Birla putty for making smooth surface and applying three coats of white wash all as specified and directed.
(Applicable for above all items)
Contrator has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office.
Labour should wear contractors uniform with firm logo, failing which recovery should be made.
Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site.
Site clearance shall be done by contractor after finishing work and obtain the signature of occupant as the site clearance has done. The same shall be verified and put up before issue of completion certificate
All Scarps will be done with mechanical scaper
Mechanical scaper should be deposited in our store at the time of sample approval
GGS Infra
Mukund Engineers and Contractors
S.K.HARAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .