Krishnagiri DT Hosur Block under SCPAR 2024-2025 Construction of New Buss stand at Bagalur in Bagalur Village Package No TN 04 KRI 43

Amount

1. Construction of New Bus Stand at Bagalur H/o.Bagalur - Rs.100.000/- Lakhs

Construction of Passenger Shelter

Earthwork excavation and depositing on bank with in initial lead lift in HG Soil for foundation etc., complete

Supply and filling of Sand including cost & conveyance etc., complete

Supply and filling of Conveyed earth including Filling charges etc complete

Supply and filling of Gritty Gravel including Filling charges etc complete

CC 1:4:8 using hard broken granite stone jelly 40mm guage including cost and conveyance and all labour charges etc complete

CC 1:3:6 using hard broken granite stone jelly 20mm guage including cost and conveyance and all labour charges etc complete

Supply and erection of steel centering fore RCC works using MS Sheet and angels and strutting upto 3.00 in height including cost and conveyance of all materials to site and all labour charges etc complete

Footing

Round Column

Roof Slab

Additional Strutting

Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site and all labour charges etc complete

Basemet

Parapaet wall allround and Arch Portion

Reinforced Cement Concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc., complete

Coloumn Footing

Ground Floor

First Floor Column

Supply and fabrication of steel for RCC works using RTS rod including cost and conveyance of all materials to site all labour charges etc complete

Weathering course concrete using best quality broken brick jelly of size 20mm pure including cost and conveyance and all labour charges etc complete

Finishing the top roof with one course of Pressed tiles

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm

Plastering with cement mortor 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putt

Supply of Rain Water Pipe including all cost and conveyance etc., complete

110 mm PVC pipe

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes.

9" Letters

Emblem (15”)

Providing Light Roofing in outside of Bus stand at BAGALUR

Providing for Gutter including all cost and conveyance etc complete.

Supply and fixing of Polycarbonate sheet of 10mm Thick With both side U.V Protection

Supply and fixing of Steel Truss

Painting two coats New Iron works including cost of all materials to site and all other labour charges etc., complete

Construction of Arch in Entrance And Exist in BAGALUR Bus stand

Earth work Excavation and depositing on bank with in initial lead lift in HG soil for foundation etc., complete

Supply and filling of Sand Including cost & conveyance etc., complete

C.C 1:4:8 using hard broken granite stone jelly 40mm guage including cost and conveyance and all labour charges etc complete

Supply and Errection of Centering charges including all cost and labour charges etc complete

Footing Side Portion

Entrance Arch

Roof Slab

Brick Work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site and all labour charges etc complete.

1st Floor Entrance Arch

2nd Floor

Rcc 1:1.5:3mix using 20mm metal including all cost and labour charges etc complete

Below Basement

Ground Floor Column

Roof Beam

Supply and Fabrication of steel for RCC Work including all cost and labour charges etc complete

Entrace Arch

Plastering in CM 1:5 mix to 12mm thick including cost of all materials to site and all other labour charges etc., complete

Plastering in CM 1:3 mix to 10mm thick including cost of all materials to site and all other labour charges etc., complete

Painting with ultima apex paint 2 coats over one coat of poiming cost for approved quality including cost and labour charges etc.,complete.

Construction of CC Pavement in BAGALUR Bus stand

Supply and Erection of steel centering fore RCC works using MS sheet and angles and strutting upto 3.00 in height including cost and conveyance of all materials to site and all labour charges etc complete

C.C 1:1.5:3 mix using 20 mm Metal including cost of all materials to site and all other labour charges etc., complete

Supply and fabrication of steel for RCC work using RTS rod including cost and conveyance of all materials to site all labour charges etc complete

Provision for Electrical Arrangements

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed cu. Counductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. Swit (SD 17)

Supply and fixing of 5 Amps 3 Pin and 2 Pin compined type wall socket with 5 Amps flush type switch concealed in suitable TW box covered with hylem sheet inflush with wall with earth connection (SD 133)

Supply and fixing of fancy glass shade and 11 W CFL for BH Point (SD 80)

Supply and fixing of single box type 4'40 W flu fitting complete with eloctronic ballast with TW round blocks ion wall or ceiling with flu tube with PVC unsheathed Copper leads from trrminals to the fitting (SD87)

Supply and fixing of 1200 (48") AC Ceiling fan complete with stepped electric 300w regulator with 300mm down rod on the existing lamp (SD 110)

Supply and fixing of 8 way single pole and neutral mcB sheet steel enclosure distribution board of metal double door type with IP 42 protection with bus bar and neutral link and provision of taking up cable of suitable size with 1 No. 32A SPmCB as outgoin

Supply and fixing of vertical type 8 way TP & N MCB DB in sheet steel enclosure with metal double door type IP 42 protection with bus bar and neutral link and provision of taking up cable of suitable size with 1 No. 63A FP Isolator and 15 Nos. 32A DPMCB

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour. (SD 54)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD70) 330.50

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection(SD 76) 356.00

Supply and run of 1 of No.8 SWG GI wire for earth connection.(SD 74) 12.55

Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing(SD 143)

Supply and fixng of TNEB Meter Board suitable for 3 Phases 100A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size (SD 131)

Extranal Electrification (250W sodium Vapour Fitting & Lamp ) Out Side the building

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 212) 868.05

Provision for Service conncetion charges

Provision for Photo charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Karpaga Vinayagar Engineer Construction (BID ID -1173751)