ACCF/Kitchen Equipment/2025-26/116

SITC of Laundry

Dhubri (As per BoQ details mentioned in individual sheet)

Tinsikia (As per BoQ details mentioned in individual sheet)

Sibsagar (As per BoQ details mentioned in individual sheet)

Nagaon (As per BoQ details mentioned in individual sheet)

Nalbari (As per BoQ details mentioned in individual sheet)

Golaghat (As per BoQ details mentioned in individual sheet)

Kitchen Equipemnts BOQ for Dhubri Site

MAIN KITCHEN

POT WASH

MASALA GRINDING AREA

VEG SANITIZING ROOM

WALK IN COOLER

THERAPEUTIC KITCHEN

SET UP AREA

DISH WASH

DRY STORE

SERVING COUNTER

FIFTH FLOOR PANTRY

CMC for 3rd year

CMC for 4th year

CMC for 5th year

CMC for 6th year

CMC for 7th year

Kitchen BOQ For L3 Sites

HOT BAIN MARIE WITH 1/1 GN PAN 5 NOS with electrical ISOLATOR : Top 14 Swg Stainless Steel Sheet With Cut Out To Hold 4 Nos 1/1X150 Mm Deep & 2 Nos 1/2X150 Mm Deep With Gn Pan Container With Lid. * Unit To Be Supplied With Gn Pans & Lids. Tray Rail: 14 Swg SS Tray Rail (With Outward Dimples Shown- Single Sheet Construction. Sneeze Guard: 25X25 mm Square Pipe Frame Work To Hold Sneeze Guard Glass, 50X25X16 Swg Stainless Steel Rectangular Pipes For Vertical Upright Support. Toughened Glass 8 Mm Thick, Mounted On Framework. Water Tank: 18 Swg Stainless Steel Water Chambers With Lever Operated Drain Valve. Sunkin Heater Chamber Required. Provided Angle Cock For Water Controlling Front & Control Panel: 18 Swg Stainless Steel. Sides & Rear: 18 Swg Stainless Steel Rear And Both Sides. Bottom Shelf: 16 Swg Stainless Steel Perforated. Legs: 30X30 Mm Stainless Steel Square Pipe With Adjustable Ss Bullet Feet. Framework: 35X35X3Mm Thick Stainless Steel. Ele-Bain Marie: 2 Nos. Water Immersion Heaters Each Of 1.5 Kw Each I Ph (Total-3 Kw) With Three Positions Toggle Switch, Thermostat & A Float- Dry Cutoff Switch In Water Chamber.

PLATE COUNTER:- Top: Made of 16 Swg S.S. sheet 304 grade. Side Paneling: All sides 20/22 Swg S.S. sheet. Frame: 1½”x1½”x1/8” thick MS angles frame work. Legs: 11/2” Dia 16 Swg S.S. pipe with adjustable feet.

INSECT KILLER :-

WORK TABLE : Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

TWO BURNER INDIAN RANGE:- Unit to have 14 GA SS top, 2 nos. removable grating on top, High-pressure burner, Gas heating equipment, Individual pilot and regulator to be provided. Two Drip trays are to be provided below the burner. External body of 20 GA SS, & 38mm dia legs with bullet feet, SS bottom shelf to be provided at 150 mm.150mm high against the wall splash only, closed from the back. 75-100 mm setback of legs at the rear side for Gas routing . All construction in SS 304.

SS DRAIN TROUGH GRATING :- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through of 16 GA SS with centre drain outlet. Through with SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating

WORK TABLE :- Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

FOUR DOOR VERTICAL REFRIGERATOR :- All cladding to be of 20 GA SS, with insulation. All construction in SS 304 grade Unit to be provided with doors with integrated handle and compressor assembly on top, & Forced draft cooling. unit to maintain a temperature of -2° to 10°C temp. Legs - round dia with SS bullet feet. 8 nos. adjustable & removable shelves.

WEIGHING SCALE:

ONION POTATO BIN:- 14 GA SS 25mm X 25mm framework. SS wire mesh construction. Unit is to be in two partitions. Top open able. Bottom window openable at 150mm AFF. Bins to be provided on wheels

SS STORAGE RACK: 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30MM Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

DISH LANDING TABLE:- Top: 14 Swg Stainless Steel Sunk-In Top With 100 Mm Deep, Turned Down By 50X60 mm, In By 12 mm From All Sides & With Ø200Mm Cut Out For Garbage Chute Overhead Shelf: 16 Swg Stainless Steel With 3 Sides Up And Front Beeded Twice Downwards, Duly Strengthened With 14 Swg S.S. Inverted Channel. Overgead Lags: 25X25 mm Square Pipe Legs: 30X30 Mm S.S. Square Pipe With Adj. SS Bullet Feet. Cross Bracing: 25 X 25 mm Square Pipe On Rear And Both Sides. Framework: 35X35X3 Mm Thick Stainless Steel Angle.

GARBAGE BIN:

THREE SINK UNIT complete with faucet, angle valve, drain accessories, and connecting pipes 14 GA SS top with S.S. Angle framework. All construction to be in 304 S.S. sink drain. waste at centre with valve, overflow assembly& SS bottle trap. 20 GA SS sheet front apron of sink. Sink size 50mm deep, removable SS strainer basket. 25mm SS pipe, Cross bracing at 3 sides closed and one side to be open. 250mm high against the wall splash only, closed from the back. 4 Legs – 38 mm dia. with S.S. bullet feet.

PRI RINSE UNIT:-

PIPE WALL SHELF:- SS pipe shelf with 14 GA SS bracket for securing to wall. All construction in SS 304. Mounting height of 1200mm. Unit should be mounted with 3 brackets to provide. maximum support.

CLEAN DISH TABLE:- 14 GA SS top with SS Angle framework. All construction in SS 304. Under shelf made of 16 SWG 304. 150mm splash at rear, closed from behind. 4 Legs – 38 mm dia. with S.S. bullet feet. .4

SS PERFORATED RACK:- 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30 mm Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

BUSSING TROLLEY:- helves : 16 Swg Ss Tray Type Shelves. Castor Wheel: Ø 125 Mm. All Swivel Rubberised Plate Fitted Castors With Load Factor Approx.- 150 / 200 Kg. Per Castor. With Rubber Bumpers At All 4 Corners. Uprights: Ø30Mmx16 Swg Ss Pipes.

WATER COOLER:

SS DRAIN TROUGH GRATING:- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through 16 GA SS with centre drain outlet. Through with the SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating Outer bearing bar framework of 25x4 mm welded construction for grating.

AIR CURTAIN with automatic operation through Door sensor

FIRE SUPPRESSION SYSTEM :-

Gas Leak Detector consisiting of all accrssries for Gas Bank , Sensors (Flame Proof) Catalytic Combustible Sensors enclosed in Flame Proof Modules (IP67) for all Gas Bank along with instrumentation cable

GAS PIPELINE:-25mm ERW Class C Pipe with Fittings

6 Cylinder System consisting of NRV, flexible hose pipes of 1 meter long, click-on adaptors, left right Adopters, cylinder hoses, prefilter (Vanaz), Pressure regulator preset 2 no’s adjustable 2 no’s (Vanaz), and other required accessories along with proper shed

Total

Kitchen BOQ For L3 Sites

HOT BAIN MARIE WITH 1/1 GN PAN 5 NOS with electrical ISOLATOR : Top 14 Swg Stainless Steel Sheet With Cut Out To Hold 4 Nos 1/1X150 Mm Deep & 2 Nos 1/2X150 Mm Deep With Gn Pan Container With Lid. * Unit To Be Supplied With Gn Pans & Lids. Tray Rail: 14 Swg SS Tray Rail (With Outward Dimples Shown- Single Sheet Construction. Sneeze Guard: 25X25 mm Square Pipe Frame Work To Hold Sneeze Guard Glass, 50X25X16 Swg Stainless Steel Rectangular Pipes For Vertical Upright Support. Toughened Glass 8 Mm Thick, Mounted On Framework. Water Tank: 18 Swg Stainless Steel Water Chambers With Lever Operated Drain Valve. Sunkin Heater Chamber Required. Provided Angle Cock For Water Controlling Front & Control Panel: 18 Swg Stainless Steel. Sides & Rear: 18 Swg Stainless Steel Rear And Both Sides. Bottom Shelf: 16 Swg Stainless Steel Perforated. Legs: 30X30 Mm Stainless Steel Square Pipe With Adjustable Ss Bullet Feet. Framework: 35X35X3Mm Thick Stainless Steel. Ele-Bain Marie: 2 Nos. Water Immersion Heaters Each Of 1.5 Kw Each I Ph (Total-3 Kw) With Three Positions Toggle Switch, Thermostat & A Float- Dry Cutoff Switch In Water Chamber.

PLATE COUNTER:- Top: Made of 16 Swg S.S. sheet 304 grade. Side Paneling: All sides 20/22 Swg S.S. sheet. Frame: 1½”x1½”x1/8” thick MS angles frame work. Legs: 11/2” Dia 16 Swg S.S. pipe with adjustable feet.

INSECT KILLER :-

WORK TABLE : Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

TWO BURNER INDIAN RANGE:- Unit to have 14 GA SS top, 2 nos. removable grating on top, High-pressure burner, Gas heating equipment, Individual pilot and regulator to be provided. Two Drip trays are to be provided below the burner. External body of 20 GA SS, & 38mm dia legs with bullet feet, SS bottom shelf to be provided at 150 mm.150mm high against the wall splash only, closed from the back. 75-100 mm setback of legs at the rear side for Gas routing . All construction in SS 304.

SS DRAIN TROUGH GRATING :- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through of 16 GA SS with centre drain outlet. Through with SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating

WORK TABLE :- Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

FOUR DOOR VERTICAL REFRIGERATOR :- All cladding to be of 20 GA SS, with insulation. All construction in SS 304 grade Unit to be provided with doors with integrated handle and compressor assembly on top, & Forced draft cooling. unit to maintain a temperature of -2° to 10°C temp. Legs - round dia with SS bullet feet. 8 nos. adjustable & removable shelves.

WEIGHING SCALE:

ONION POTATO BIN:- 14 GA SS 25mm X 25mm framework. SS wire mesh construction. Unit is to be in two partitions. Top open able. Bottom window openable at 150mm AFF. Bins to be provided on wheels

SS STORAGE RACK: 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30MM Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

DISH LANDING TABLE:- Top: 14 Swg Stainless Steel Sunk-In Top With 100 Mm Deep, Turned Down By 50X60 mm, In By 12 mm From All Sides & With Ø200Mm Cut Out For Garbage Chute Overhead Shelf: 16 Swg Stainless Steel With 3 Sides Up And Front Beeded Twice Downwards, Duly Strengthened With 14 Swg S.S. Inverted Channel. Overgead Lags: 25X25 mm Square Pipe Legs: 30X30 Mm S.S. Square Pipe With Adj. SS Bullet Feet. Cross Bracing: 25 X 25 mm Square Pipe On Rear And Both Sides. Framework: 35X35X3 Mm Thick Stainless Steel Angle.

GARBAGE BIN:

THREE SINK UNIT complete with faucet, angle valve, drain accessories, and connecting pipes 14 GA SS top with S.S. Angle framework. All construction to be in 304 S.S. sink drain. waste at centre with valve, overflow assembly& SS bottle trap. 20 GA SS sheet front apron of sink. Sink size 50mm deep, removable SS strainer basket. 25mm SS pipe, Cross bracing at 3 sides closed and one side to be open. 250mm high against the wall splash only, closed from the back. 4 Legs – 38 mm dia. with S.S. bullet feet.

PRI RINSE UNIT:-

PIPE WALL SHELF:- SS pipe shelf with 14 GA SS bracket for securing to wall. All construction in SS 304. Mounting height of 1200mm. Unit should be mounted with 3 brackets to provide. maximum support.

CLEAN DISH TABLE:- 14 GA SS top with SS Angle framework. All construction in SS 304. Under shelf made of 16 SWG 304. 150mm splash at rear, closed from behind. 4 Legs – 38 mm dia. with S.S. bullet feet. .4

SS PERFORATED RACK:- 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30 mm Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

BUSSING TROLLEY:- helves : 16 Swg Ss Tray Type Shelves. Castor Wheel: Ø 125 Mm. All Swivel Rubberised Plate Fitted Castors With Load Factor Approx.- 150 / 200 Kg. Per Castor. With Rubber Bumpers At All 4 Corners. Uprights: Ø30Mmx16 Swg Ss Pipes.

WATER COOLER:

SS DRAIN TROUGH GRATING:- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through 16 GA SS with centre drain outlet. Through with the SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating Outer bearing bar framework of 25x4 mm welded construction for grating.

AIR CURTAIN with automatic operation through Door sensor

FIRE SUPPRESSION SYSTEM :-

Gas Leak Detector consisiting of all accrssries for Gas Bank , Sensors (Flame Proof) Catalytic Combustible Sensors enclosed in Flame Proof Modules (IP67) for all Gas Bank along with instrumentation cable

GAS PIPELINE:-25mm ERW Class C Pipe with Fittings

6 Cylinder System consisting of NRV, flexible hose pipes of 1 meter long, click-on adaptors, left right Adopters, cylinder hoses, prefilter (Vanaz), Pressure regulator preset 2 no’s adjustable 2 no’s (Vanaz), and other required accessories along with proper shed

Total

Kitchen BOQ For L3 Sites

HOT BAIN MARIE WITH 1/1 GN PAN 5 NOS with electrical ISOLATOR : Top 14 Swg Stainless Steel Sheet With Cut Out To Hold 4 Nos 1/1X150 Mm Deep & 2 Nos 1/2X150 Mm Deep With Gn Pan Container With Lid. * Unit To Be Supplied With Gn Pans & Lids. Tray Rail: 14 Swg SS Tray Rail (With Outward Dimples Shown- Single Sheet Construction. Sneeze Guard: 25X25 mm Square Pipe Frame Work To Hold Sneeze Guard Glass, 50X25X16 Swg Stainless Steel Rectangular Pipes For Vertical Upright Support. Toughened Glass 8 Mm Thick, Mounted On Framework. Water Tank: 18 Swg Stainless Steel Water Chambers With Lever Operated Drain Valve. Sunkin Heater Chamber Required. Provided Angle Cock For Water Controlling Front & Control Panel: 18 Swg Stainless Steel. Sides & Rear: 18 Swg Stainless Steel Rear And Both Sides. Bottom Shelf: 16 Swg Stainless Steel Perforated. Legs: 30X30 Mm Stainless Steel Square Pipe With Adjustable Ss Bullet Feet. Framework: 35X35X3Mm Thick Stainless Steel. Ele-Bain Marie: 2 Nos. Water Immersion Heaters Each Of 1.5 Kw Each I Ph (Total-3 Kw) With Three Positions Toggle Switch, Thermostat & A Float- Dry Cutoff Switch In Water Chamber.

PLATE COUNTER:- Top: Made of 16 Swg S.S. sheet 304 grade. Side Paneling: All sides 20/22 Swg S.S. sheet. Frame: 1½”x1½”x1/8” thick MS angles frame work. Legs: 11/2” Dia 16 Swg S.S. pipe with adjustable feet.

INSECT KILLER :-

WORK TABLE : Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

TWO BURNER INDIAN RANGE:- Unit to have 14 GA SS top, 2 nos. removable grating on top, High-pressure burner, Gas heating equipment, Individual pilot and regulator to be provided. Two Drip trays are to be provided below the burner. External body of 20 GA SS, & 38mm dia legs with bullet feet, SS bottom shelf to be provided at 150 mm.150mm high against the wall splash only, closed from the back. 75-100 mm setback of legs at the rear side for Gas routing . All construction in SS 304.

SS DRAIN TROUGH GRATING :- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through of 16 GA SS with centre drain outlet. Through with SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating

WORK TABLE :- Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

FOUR DOOR VERTICAL REFRIGERATOR :- All cladding to be of 20 GA SS, with insulation. All construction in SS 304 grade Unit to be provided with doors with integrated handle and compressor assembly on top, & Forced draft cooling. unit to maintain a temperature of -2° to 10°C temp. Legs - round dia with SS bullet feet. 8 nos. adjustable & removable shelves.

WEIGHING SCALE:

ONION POTATO BIN:- 14 GA SS 25mm X 25mm framework. SS wire mesh construction. Unit is to be in two partitions. Top open able. Bottom window openable at 150mm AFF. Bins to be provided on wheels

SS STORAGE RACK: 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30MM Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

DISH LANDING TABLE:- Top: 14 Swg Stainless Steel Sunk-In Top With 100 Mm Deep, Turned Down By 50X60 mm, In By 12 mm From All Sides & With Ø200Mm Cut Out For Garbage Chute Overhead Shelf: 16 Swg Stainless Steel With 3 Sides Up And Front Beeded Twice Downwards, Duly Strengthened With 14 Swg S.S. Inverted Channel. Overgead Lags: 25X25 mm Square Pipe Legs: 30X30 Mm S.S. Square Pipe With Adj. SS Bullet Feet. Cross Bracing: 25 X 25 mm Square Pipe On Rear And Both Sides. Framework: 35X35X3 Mm Thick Stainless Steel Angle.

GARBAGE BIN:

THREE SINK UNIT complete with faucet, angle valve, drain accessories, and connecting pipes 14 GA SS top with S.S. Angle framework. All construction to be in 304 S.S. sink drain. waste at centre with valve, overflow assembly& SS bottle trap. 20 GA SS sheet front apron of sink. Sink size 50mm deep, removable SS strainer basket. 25mm SS pipe, Cross bracing at 3 sides closed and one side to be open. 250mm high against the wall splash only, closed from the back. 4 Legs – 38 mm dia. with S.S. bullet feet.

PRI RINSE UNIT:-

PIPE WALL SHELF:- SS pipe shelf with 14 GA SS bracket for securing to wall. All construction in SS 304. Mounting height of 1200mm. Unit should be mounted with 3 brackets to provide. maximum support.

CLEAN DISH TABLE:- 14 GA SS top with SS Angle framework. All construction in SS 304. Under shelf made of 16 SWG 304. 150mm splash at rear, closed from behind. 4 Legs – 38 mm dia. with S.S. bullet feet. .4

SS PERFORATED RACK:- 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30 mm Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

BUSSING TROLLEY:- helves : 16 Swg Ss Tray Type Shelves. Castor Wheel: Ø 125 Mm. All Swivel Rubberised Plate Fitted Castors With Load Factor Approx.- 150 / 200 Kg. Per Castor. With Rubber Bumpers At All 4 Corners. Uprights: Ø30Mmx16 Swg Ss Pipes.

WATER COOLER:

SS DRAIN TROUGH GRATING:- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through 16 GA SS with centre drain outlet. Through with the SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating Outer bearing bar framework of 25x4 mm welded construction for grating.

AIR CURTAIN with automatic operation through Door sensor

FIRE SUPPRESSION SYSTEM :-

Gas Leak Detector consisiting of all accrssries for Gas Bank , Sensors (Flame Proof) Catalytic Combustible Sensors enclosed in Flame Proof Modules (IP67) for all Gas Bank along with instrumentation cable

GAS PIPELINE:-25mm ERW Class C Pipe with Fittings

6 Cylinder System consisting of NRV, flexible hose pipes of 1 meter long, click-on adaptors, left right Adopters, cylinder hoses, prefilter (Vanaz), Pressure regulator preset 2 no’s adjustable 2 no’s (Vanaz), and other required accessories along with proper shed

Kitchen BOQ For L3 Sites

HOT BAIN MARIE WITH 1/1 GN PAN 5 NOS with electrical ISOLATOR : Top 14 Swg Stainless Steel Sheet With Cut Out To Hold 4 Nos 1/1X150 Mm Deep & 2 Nos 1/2X150 Mm Deep With Gn Pan Container With Lid. * Unit To Be Supplied With Gn Pans & Lids. Tray Rail: 14 Swg SS Tray Rail (With Outward Dimples Shown- Single Sheet Construction. Sneeze Guard: 25X25 mm Square Pipe Frame Work To Hold Sneeze Guard Glass, 50X25X16 Swg Stainless Steel Rectangular Pipes For Vertical Upright Support. Toughened Glass 8 Mm Thick, Mounted On Framework. Water Tank: 18 Swg Stainless Steel Water Chambers With Lever Operated Drain Valve. Sunkin Heater Chamber Required. Provided Angle Cock For Water Controlling Front & Control Panel: 18 Swg Stainless Steel. Sides & Rear: 18 Swg Stainless Steel Rear And Both Sides. Bottom Shelf: 16 Swg Stainless Steel Perforated. Legs: 30X30 Mm Stainless Steel Square Pipe With Adjustable Ss Bullet Feet. Framework: 35X35X3Mm Thick Stainless Steel. Ele-Bain Marie: 2 Nos. Water Immersion Heaters Each Of 1.5 Kw Each I Ph (Total-3 Kw) With Three Positions Toggle Switch, Thermostat & A Float- Dry Cutoff Switch In Water Chamber.

PLATE COUNTER:- Top: Made of 16 Swg S.S. sheet 304 grade. Side Paneling: All sides 20/22 Swg S.S. sheet. Frame: 1½”x1½”x1/8” thick MS angles frame work. Legs: 11/2” Dia 16 Swg S.S. pipe with adjustable feet.

INSECT KILLER :-

WORK TABLE : Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

TWO BURNER INDIAN RANGE:- Unit to have 14 GA SS top, 2 nos. removable grating on top, High-pressure burner, Gas heating equipment, Individual pilot and regulator to be provided. Two Drip trays are to be provided below the burner. External body of 20 GA SS, & 38mm dia legs with bullet feet, SS bottom shelf to be provided at 150 mm.150mm high against the wall splash only, closed from the back. 75-100 mm setback of legs at the rear side for Gas routing . All construction in SS 304.

SS DRAIN TROUGH GRATING :- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through of 16 GA SS with centre drain outlet. Through with SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating

WORK TABLE :- Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

FOUR DOOR VERTICAL REFRIGERATOR :- All cladding to be of 20 GA SS, with insulation. All construction in SS 304 grade Unit to be provided with doors with integrated handle and compressor assembly on top, & Forced draft cooling. unit to maintain a temperature of -2° to 10°C temp. Legs - round dia with SS bullet feet. 8 nos. adjustable & removable shelves.

WEIGHING SCALE:

ONION POTATO BIN:- 14 GA SS 25mm X 25mm framework. SS wire mesh construction. Unit is to be in two partitions. Top open able. Bottom window openable at 150mm AFF. Bins to be provided on wheels

SS STORAGE RACK: 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30MM Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

DISH LANDING TABLE:- Top: 14 Swg Stainless Steel Sunk-In Top With 100 Mm Deep, Turned Down By 50X60 mm, In By 12 mm From All Sides & With Ø200Mm Cut Out For Garbage Chute Overhead Shelf: 16 Swg Stainless Steel With 3 Sides Up And Front Beeded Twice Downwards, Duly Strengthened With 14 Swg S.S. Inverted Channel. Overgead Lags: 25X25 mm Square Pipe Legs: 30X30 Mm S.S. Square Pipe With Adj. SS Bullet Feet. Cross Bracing: 25 X 25 mm Square Pipe On Rear And Both Sides. Framework: 35X35X3 Mm Thick Stainless Steel Angle.

GARBAGE BIN:

THREE SINK UNIT complete with faucet, angle valve, drain accessories, and connecting pipes 14 GA SS top with S.S. Angle framework. All construction to be in 304 S.S. sink drain. waste at centre with valve, overflow assembly& SS bottle trap. 20 GA SS sheet front apron of sink. Sink size 50mm deep, removable SS strainer basket. 25mm SS pipe, Cross bracing at 3 sides closed and one side to be open. 250mm high against the wall splash only, closed from the back. 4 Legs – 38 mm dia. with S.S. bullet feet.

PRI RINSE UNIT:-

PIPE WALL SHELF:- SS pipe shelf with 14 GA SS bracket for securing to wall. All construction in SS 304. Mounting height of 1200mm. Unit should be mounted with 3 brackets to provide. maximum support.

CLEAN DISH TABLE:- 14 GA SS top with SS Angle framework. All construction in SS 304. Under shelf made of 16 SWG 304. 150mm splash at rear, closed from behind. 4 Legs – 38 mm dia. with S.S. bullet feet. .4

SS PERFORATED RACK:- 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30 mm Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

BUSSING TROLLEY:- helves : 16 Swg Ss Tray Type Shelves. Castor Wheel: Ø 125 Mm. All Swivel Rubberised Plate Fitted Castors With Load Factor Approx.- 150 / 200 Kg. Per Castor. With Rubber Bumpers At All 4 Corners. Uprights: Ø30Mmx16 Swg Ss Pipes.

WATER COOLER:

SS DRAIN TROUGH GRATING:- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through 16 GA SS with centre drain outlet. Through with the SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating Outer bearing bar framework of 25x4 mm welded construction for grating.

AIR CURTAIN with automatic operation through Door sensor

FIRE SUPPRESSION SYSTEM :-

Gas Leak Detector consisiting of all accrssries for Gas Bank , Sensors (Flame Proof) Catalytic Combustible Sensors enclosed in Flame Proof Modules (IP67) for all Gas Bank along with instrumentation cable

GAS PIPELINE:-25mm ERW Class C Pipe with Fittings

6 Cylinder System consisting of NRV, flexible hose pipes of 1 meter long, click-on adaptors, left right Adopters, cylinder hoses, prefilter (Vanaz), Pressure regulator preset 2 no’s adjustable 2 no’s (Vanaz), and other required accessories along with proper shed

Kitchen BOQ For L3 Sites

HOT BAIN MARIE WITH 1/1 GN PAN 5 NOS with electrical ISOLATOR : Top 14 Swg Stainless Steel Sheet With Cut Out To Hold 4 Nos 1/1X150 Mm Deep & 2 Nos 1/2X150 Mm Deep With Gn Pan Container With Lid. * Unit To Be Supplied With Gn Pans & Lids. Tray Rail: 14 Swg SS Tray Rail (With Outward Dimples Shown- Single Sheet Construction. Sneeze Guard: 25X25 mm Square Pipe Frame Work To Hold Sneeze Guard Glass, 50X25X16 Swg Stainless Steel Rectangular Pipes For Vertical Upright Support. Toughened Glass 8 Mm Thick, Mounted On Framework. Water Tank: 18 Swg Stainless Steel Water Chambers With Lever Operated Drain Valve. Sunkin Heater Chamber Required. Provided Angle Cock For Water Controlling Front & Control Panel: 18 Swg Stainless Steel. Sides & Rear: 18 Swg Stainless Steel Rear And Both Sides. Bottom Shelf: 16 Swg Stainless Steel Perforated. Legs: 30X30 Mm Stainless Steel Square Pipe With Adjustable Ss Bullet Feet. Framework: 35X35X3Mm Thick Stainless Steel. Ele-Bain Marie: 2 Nos. Water Immersion Heaters Each Of 1.5 Kw Each I Ph (Total-3 Kw) With Three Positions Toggle Switch, Thermostat & A Float- Dry Cutoff Switch In Water Chamber.

PLATE COUNTER:- Top: Made of 16 Swg S.S. sheet 304 grade. Side Paneling: All sides 20/22 Swg S.S. sheet. Frame: 1½”x1½”x1/8” thick MS angles frame work. Legs: 11/2” Dia 16 Swg S.S. pipe with adjustable feet.

INSECT KILLER :-

WORK TABLE : Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

TWO BURNER INDIAN RANGE:- Unit to have 14 GA SS top, 2 nos. removable grating on top, High-pressure burner, Gas heating equipment, Individual pilot and regulator to be provided. Two Drip trays are to be provided below the burner. External body of 20 GA SS, & 38mm dia legs with bullet feet, SS bottom shelf to be provided at 150 mm.150mm high against the wall splash only, closed from the back. 75-100 mm setback of legs at the rear side for Gas routing . All construction in SS 304.

SS DRAIN TROUGH GRATING :- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through of 16 GA SS with centre drain outlet. Through with SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating

WORK TABLE :- Top 14 Swg Stainless Steel Top With Splash Back. Undershelves: 2 Nos 16 Swg Stainless Steel All Sides Beeded Twice Downwards. Legs 30X30Mm Ss Square Pipes With Adj. Ss Bullet Feet Framework: 35X35X3 Mm Thick Stainless Steel Angle.

FOUR DOOR VERTICAL REFRIGERATOR :- All cladding to be of 20 GA SS, with insulation. All construction in SS 304 grade Unit to be provided with doors with integrated handle and compressor assembly on top, & Forced draft cooling. unit to maintain a temperature of -2° to 10°C temp. Legs - round dia with SS bullet feet. 8 nos. adjustable & removable shelves.

WEIGHING SCALE:

ONION POTATO BIN:- 14 GA SS 25mm X 25mm framework. SS wire mesh construction. Unit is to be in two partitions. Top open able. Bottom window openable at 150mm AFF. Bins to be provided on wheels

SS STORAGE RACK: 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30MM Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

DISH LANDING TABLE:- Top: 14 Swg Stainless Steel Sunk-In Top With 100 Mm Deep, Turned Down By 50X60 mm, In By 12 mm From All Sides & With Ø200Mm Cut Out For Garbage Chute Overhead Shelf: 16 Swg Stainless Steel With 3 Sides Up And Front Beeded Twice Downwards, Duly Strengthened With 14 Swg S.S. Inverted Channel. Overgead Lags: 25X25 mm Square Pipe Legs: 30X30 Mm S.S. Square Pipe With Adj. SS Bullet Feet. Cross Bracing: 25 X 25 mm Square Pipe On Rear And Both Sides. Framework: 35X35X3 Mm Thick Stainless Steel Angle.

GARBAGE BIN:

THREE SINK UNIT complete with faucet, angle valve, drain accessories, and connecting pipes 14 GA SS top with S.S. Angle framework. All construction to be in 304 S.S. sink drain. waste at centre with valve, overflow assembly& SS bottle trap. 20 GA SS sheet front apron of sink. Sink size 50mm deep, removable SS strainer basket. 25mm SS pipe, Cross bracing at 3 sides closed and one side to be open. 250mm high against the wall splash only, closed from the back. 4 Legs – 38 mm dia. with S.S. bullet feet.

PRI RINSE UNIT:-

PIPE WALL SHELF:- SS pipe shelf with 14 GA SS bracket for securing to wall. All construction in SS 304. Mounting height of 1200mm. Unit should be mounted with 3 brackets to provide. maximum support.

CLEAN DISH TABLE:- 14 GA SS top with SS Angle framework. All construction in SS 304. Under shelf made of 16 SWG 304. 150mm splash at rear, closed from behind. 4 Legs – 38 mm dia. with S.S. bullet feet. .4

SS PERFORATED RACK:- 18 Swg S.S. Sheet Equidistant From Each Other, Duly Strengthened With Stainless Steel Stiffeners From Beneath. Uprights: 30X30 mm Stainless Steel Square Pipes With Adjustable SS Bullet Feet.

BUSSING TROLLEY:- helves : 16 Swg Ss Tray Type Shelves. Castor Wheel: Ø 125 Mm. All Swivel Rubberised Plate Fitted Castors With Load Factor Approx.- 150 / 200 Kg. Per Castor. With Rubber Bumpers At All 4 Corners. Uprights: Ø30Mmx16 Swg Ss Pipes.

WATER COOLER:

SS DRAIN TROUGH GRATING:- Outer bearing bar framework of 25x4 mm welded construction for grating. Lateral and horizontal cross members of the grating. to be anti-skid 20 mm x 3 mm at 75mm and 25mm C/C gap. Stainless Steel 304 construction. Through 16 GA SS with centre drain outlet. Through with the SS perforated scrap collecting basket. Removable. Provide perforated S.S. mesh between the Trough & Grating Outer bearing bar framework of 25x4 mm welded construction for grating.

AIR CURTAIN with automatic operation through Door sensor

FIRE SUPPRESSION SYSTEM :-

Gas Leak Detector consisiting of all accrssries for Gas Bank , Sensors (Flame Proof) Catalytic Combustible Sensors enclosed in Flame Proof Modules (IP67) for all Gas Bank along with instrumentation cable

GAS PIPELINE:-25mm ERW Class C Pipe with Fittings

6 Cylinder System consisting of NRV, flexible hose pipes of 1 meter long, click-on adaptors, left right Adopters, cylinder hoses, prefilter (Vanaz), Pressure regulator preset 2 no’s adjustable 2 no’s (Vanaz), and other required accessories along with proper shed

Please Enable Macros to View BoQ information