REPAIR TO WALL FENCING, GATE, DRAIN, BOUNDARY WALL DESLUDGING OF SEPTICK TANK ETC IN THE AOR OF AGE BR-III UNDER GE 874 EWS.

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws complete all as specified & directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified & directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification.

S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with, with inlet, ball valve, float and handle including brackets complete all as specified & directed.

S & F in repairs vitreous China squatting pan, Orissa pattern size 580 x440 mm white, with integral foot rests complete all as specified & directed.

S&F in repair. Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified & directed.

S&F in repair. Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs pillar tap cast copper alloy, fancy type with capstan head chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed.

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

S & F in repairs Vitreous China wash basin of size 550 x 400 mm, white, flat back complete all as specified & directed.

Excavation in trenches n.exc 1.5 m wide & .exc 1.5 and not exc 3.00 m deep for foundation for shafts, wells, cesspits, manholes etc not exc 10 sqm on plan and getting cut in any type soil complete all as specified and directed.

M&L for PCC 1:4:8 type C-2 using 40 mm graded stone aggregate for foundations, filling and mass concrete complete all as specified and directed.

M&L for returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed

M&L for removal of excavated material to a distance not exceeding 50m and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for cutting into existing manholes for Internal Dia Of Pipe 150 mm dia pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortal 1:6 complete all as specified & directed.

Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

S&F in repairs health faucet (hand shower) chromium plated complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness, including cover fillets complete all as specified & directed.

M&L 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coat of melamine polish including sanding/filler repair /sealer coat. Note-: frame work shall be measured and paid separately.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling /wall complete all as specified and directed.

M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified & directed.

M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall complete all as specified & directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even complete all as specified & directed.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified & directed.

M&L for providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m openable length ( total length 90m) having 50 Nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick 0 and weight 43.478 gm/metre complete all as specified & directed. Note:-Cost of M.S. angle, CC Blocks shall be paid separately.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. and in any mortar complete all as specified & directed.

M&L for 20 cm x 20cm x 25 mm thick Chequered cement concrete tiles (in any colour & shape), set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment over 20 mm screed bed in CM 1:6 complete all as specified & directed.

M&L for random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified & directed.

M&L for 75mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base floor complete all as specified & directed.

M&L for sand filling under floors or in foundations including watering and consolidation all as specified and as directed

M&L for hardcore of gauge (broken bricks) n exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90 cm complete all as specified & directed.

M&L for second class softwood as in scantling clean sawn fixed in position with nails unframed work complete all as specified & directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

M&L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified & directed.

M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for Mild steel bands ,straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay) heavy, for large gates hook and pintle hinges: large hasp and staples chains handmade sliding bolts clamps hold fasts wall ties: hooks for hanging fans plain angle cleats for securing purlins to trusses or rafters knee piece inserts two way and three way straps, plate washers and similar small articles confirming to Fe 290,Gde-E-165 complete all as specified and directed.

S&F MS angle iron fixed independently without connecting plates complete as in fencing post or struts/ 'Y' section including cutting shape as directed, drilling holes, welding notching wire including embedding in concrete and screwing conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

Taking out/Pumping out sewage water from septic tank soakage well from vehicle with attached water tank of 3000 ltr capacity with mechanical pump and sucking and removing and Dumping of the same place at the place marked for the purpose by the authority controlling the area complete all as specified and directed by Engr- in - charge distance for Removal from original point to disposal point is Marked by the Authority

Dewatering/pumping/bailing out contaminated with waste material sludge from septic tank along with inlet outlet chamber of any capacity/depth by vehicle mounted sewage suction machine and disposing same out of cantonment area including taking off manhole covers and putting back the same after cleaning/ removing the liquid waste material of septic tanks and cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces to make hygienically fit, writing the date of cleaning of septic tank with black and white paint of size 150 x 200mm and finally spraying unslaked lime (bleaching powder), dry, around and over the septic tank all as directed and to the entire satisfaction of by Engr-in-Charge. Note:- 1. Qty of liquid sludge shall be measured for payment under this item. 2. Arrangement of Land for the disposal of waste is complete responsibility of contractor. 3. Arrangement of suction machine is responsibility of contractor.

M&L 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coat of melamine polish including sanding/filler repair /sealer coat. Note-: frame work shall be measured and paid separately.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including ornamental and intricate design and portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.

MS RJ BUILDERS (BID ID -3271469)

M/S MANZOORAHMAD LONE (BID ID -3271199)

M/S MOHD MAQBOOL RATHER (BID ID -3272207)

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3272749)

M/s Sajad Hussain Wani (BID ID -3271791)

patriotic builders (BID ID -3276077)

Bidder Name

patriotic builders

M/S MANZOORAHMAD LONE

M/s Sajad Hussain Wani

M/S MUNEER AHMAD WANI CONSTRUCTIONS

M/S MOHD MAQBOOL RATHER

MS RJ BUILDERS

MS AKHLAQ ENTERPRISES