E1-2307-2024-36-ERODE CITY MUNICIPAL CORPORATION

Amount

Dismantiling the existing damaged RCC slab including all cost and conveyance of all labour charges etc complete

Removing the old water closet inculding all cost and conveyance of material and labour charges as per standard specification etc complete

Removing the existing damaged flooring tiles inculding all cost and conveyance of material and labour charges as per standard specification etc complete (W-0042)

Dismantiling the existing damaged Brick work including all cost and conveyance of all labour charges etc complete (W-0015)

Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rock requiring blasting inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including clearing leveling the site etc., complete complying with standard specification

plain cement concrete 1:4:8 mix (One cement four sand and eight aggricate) using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete.

Supplying and filling in foundation with clean dry sand from the approved quarry in layers of not exceeding 15cm thick well rammed watered and consolidated including cost and conveyance of sand to site and all labour charges and other incidental charges etc., complete complying with standard specification

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Centering for soffits of RCC slabs plane surface including strutting upto 3.00 height using mild steel of size 90cmx60cmx10 gauge fitted with MS angle of size 25mmx25mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced at 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c complying with standard specification.

A)For Column

B)With strutting

Supplying and fabrication placing in postion of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Special ceiling plastering with cement mortar 1:3 mix (One cement and three sand) to 10mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:5 mix (One cement and five sand) to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering cement mortar 1: 3 mix to 20mm thick mixing with leak proof compound including all labour charges cost and conveyance of all materials to site etc.,complete as per standard specification

Supply and placing of PVC water tank approuved quality of departmental officers loading, unloading, Frieght and transit insurance etc., Cost and conveyance of all materials to Site etc., Complete(As per sor vol-1 page no:89 M-0540)

Supply and delivery of PVC Pipe and G.I Pipes Specials approuved quality of departmental officers loading, unloading, Frieght and transit insurance etc., Cost and conveyance of all materials to Site etc., Complete As per PWDSOR 2021-2022

32MM dia,PVC pipe (As per SOR Vol-1 P.no-147 M-0877)

32MM dia,PVC Elbow (As per SOR Vol-1 P.no-147 M-0889)

32MM dia,PVC Tee (As per SOR Vol-1 P.no-148 M-0901)

25mm dia.PVC pipe (As per SOR Vol-1 P.no-146 M-0876)

25mm dia.PVC Elbow (As per SOR Vol-1 P.no-147 M-0888)

25mm dia.PVC Tee (As per SOR Vol-1 P.no-148 M-0900)

100mm x 75mm PVC Nahini / Floor Trap with Stainless Steel Grating PWD Data

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing in walls with GLAZED TILES(color) of size 305x200x6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white or color cement using 0.40 KG /1m2 including finishing the joints and painting with tiles surface including labour charges cost and conveyance of all materials to site etc.,complete as per standard specification.

Supply and Fixing of Soild PVC door shutter using 19Gauge 19mm MS Sq tubes for styles and outer frames,15mm MS Sq. tubes for top, lock and bottam rails. The steel tubes shall be coverd with 5mm thick soild PVC sheets, Shutter using 5mm thick soild PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, lock rail and bottam rail shall be 75mmx30mm. The Over all size of frames shall be 50mmx45mm, with suitable rabate for housing the shutter.(SRO 24-25 Vol-1 P.no:81 M-0393)

Supplying and fixing of 75mm Thick R.C.C. Precast slab cement concrete 1:2:4 using HBG metal to required thick including moulding finishing and curing cost and conveyance of all materials and labour etc., complete: as per standard specification

Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification. Mineral colouring pigments not affected by lime should only be used (stainers and colour solutions should not be used.)

Supplying and fixing in position of Indian make colour water closet of size in 53cm (21") orissa pan type with 'P' or 'S' trap and with sand cushion and etc.,complete with necessary connection including all labour charges cost and conveyance of all materials to site etc., complete as per standard specification

Supplying and fixing in position of EWC standard size colour glazed earthenware with cost of "P" trap and double flapped seat cover 10 lit. capacity P.V.C low level flush tank with connections etc., including all internal fitting on . Brackets 12mm PVC or brass nipple chromium plated brown headed stopcock 12mm nylon connection with necessary teak wood plugh clamps, screws to the portion coming with wall and floor, including dismantling masonery and redoing the same to the original condition complete as per standard specifications

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated unseathed SC Cu. Conductor of 1100V grade in suitablev PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flushwith wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC open fan point. ( For electronic regulator) (6points per coil) ( SD 20 )

Supplying and fixing of water tight Bulk head fitting with guard (Philips/ bajaj/crompton /Klite) suitable for incandescent lamp and 60W bulb.[SD 84]

Supply and fixing of 4 feet LED Fitting of 20watts using higher end philips/havells/equivalent as per pwd sor 2024-2025 pg no.168 item no;-15

Supply and Fixing of TNEB Metre Board Sutable for 32 A Three Phase Service Connection with 3 Nos. 32 Amps Fuse Unit (500 V) 32 A neutal line and earth line (1'x18') Coppered for fixing new with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit etc., Complete.(SD-134)

Supply and delivery of 30W LED along with 3 core 1.5sqmm Flexible cable with ISI mark using 25mm dia “B” Class (L Shape ) G1 Bracket along with 7”x3” x4 mm RCC post clamp size of 25x3mm thickness with 6nos of 5/8” Full thread 2” MS Bolt nuts Including Labours charges for removing of existing 36 or 40W FTL/24 or 36W CFL fitting and Fixing of New 40W/25W LED Lamp fittings complete set.as per pwd sor (sd-532)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supply and fixing of wash basin of size (550mm x400mm) including cost and conveyance of all materials to site etc complete as per standard specifications

Providing and Fixing of polyurethane foam as External Wall Thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted galvalume sheet with micro ribbed profile , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10

V DHAMODHARAN (BID ID -1184545)