PROVISION OF CHAIN LINK SECURITY FENCE TO PREVENT ENCH TRESPASSING OF UN-AUTH PERSONS AT RRC FATEHGARH

Amount

M & L two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces.

S&F mild steel angel iron posts and struts in fencing including cutting tips to shape as dircted, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 410-0 or Fe310-0 all as dircted by EIC

Mild steel TMT bars 10mm dia and over, fixed with chainlink fencing including cranking, bending welding all as required at site and as ditcted

Mild steel screw bolts (Machine made) 5 to 10mm dia with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long etc complete all as specified and dircted.

Supply & fixing chain link fencing of mesh size of 75x75mm of 4mm dia mild steel galvanised wire including line wires, binding wire fixed to any type of standards, rails, straining botls, etc complete all as specified & directed.

Excavating post holes in soft/Loose soils (or similar holes ) n exc 0.50 Cum each and getting out and returning filling in balance portion (after PCC filling Ref note given below) with boulder and mixed with earth in layers exceeding 25 Cm thick, rammed, watering and removing surplus soils to a distance exc 100 M but n exc 250 Mtr and deposited where directed . Note (i)The PCC 'for fxing post shall be measured and paid sepeartely under appropriate item of Sch À. Every tenth post and corner post shall be embeded in PCC as directed by Eng-in-charge. (ii) The cost of boulder and earth filling for fixing poles shall deemed to be included in quoted unit rate by the contractor.

M&L for PCC (1:3:6) type B-1 (using 20 mm graded stone aggregates) for fixing post in post holes/embedding the post all as specified and directed.

S&F for GI barbed wire 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm barbs at 75 mm spacing and shall confirming to IS-278-2001 & IS-280-2006 and straining and fixing to any type of standrad rails with & including necessary straining bolts including securing or tying at crosssing with and provision of Galvanized mild steel wire ,staples or steel pins etc as directed. Make : Tata or equivalant as approved by the AGE(i) . Note (i) The entire quantity brought by the contractor shall be got approved from GE before fixing. (ii) The weight of barbed wire shall be between 97 to 106 Kg per KM . (iii) Rates quoted by the contractor includes the cost of necessary straining/adjustment nut bolts

M/S WASEEM KHAN CONTRACTOR

MS. BK BROTHERS AND CO