PROVISION OF KOTE AND GUARD ROOM USING 3D PRINTING TECHNOLOGY FOR 873 EWS

Amount

S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

S & F vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with flat bottom and connection to drain or out going pipe and flushing pipe etc complete all as specified and directed

S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and directed

S & F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair Health faucet (ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m ong flexible tube & ABS wall hook including making connection & fixed In position omplete all as specified and directed by Engr-in-charge.

S&F, PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.

S & F in repairs Brass CP tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed.

S & F in repairs 15mm Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed by Engr-in-charge.

Excavation in trenches n exc 1.5 m wide and n exc 1.50 m in depth for foundations, laying of pipes etc & n.exc 10 Sq m on plan for manholes etc & n.exc 1.50M in depth & getting out in hard / dense soli., complete all as specified.

M&L Plain cement concrete (1:4:8) type D - 2 (using 40 mm graded crushed stone aggregate) in foundation of manholes & filling mass concrete around the manholesomplete all as specified and directed by Engr-in-charge.

M&L Plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore NP-3 pipe, complete all as specified and directed by Engr-in-charge.

M&L, PVC ( SWR) drain pipe 110 mm bore, single socketed, in any length with rubber ring joint, laid and jointed on concrete bed complete including testing al as specified ( concrete to be measured and paid separately) , complete all as specifeid and directed by engr-in-charge.

M&L Providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) in surface channels and drains roundeed or chamferred angles and throating and necessary form work complete all as specified and directed by Engr-in-charge.

M&L 15mm th cement plaster in CM (1:4) on stone masonary or surface other than fair face or brick work and finished surface even and smooth without using extra cement including mixing of liquid water proofing admixure as per menufacture's instructions, complete all as specified and directed by Engr-in-charge.

TMT reinforcement bars 10mm dia and over including all cutting, bending, cranking placing & binding with MS wire (annealed) not less than0.9mm dia, complete all as specified and directed by Engr-in-charge.

Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs and similar articles placed in position and set in CM (1:6) complete all as specified and directed by Engr-in-charge.

M & L for PCC 1:2:4 Type B0 as in seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, all as directed including form work complete all as specified and directed by Engr-in-charge.

S&F 100mm dia cast iron soil,sand cast pipe waste and vent pipes in any length complete all as specified and directed by Engr-in-charge.

Returning / filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr-in-charge.

Removing excavated materials exc 50M but n exc 100M and depositing where directed at a level n exc 1.50M above the starting point.

Constr of soakage well (3.00 mtr dia x 3.00 mtr depth) incl excavation in hard/dence siol, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, hone combed and solid stone work in cement mortar 1:4, RCC cover slab, filling all as specified and shown in drawings (CESZ/TD-1078/2011 sh No 1/1 dt 01 Dec 2011) complete all as specified and directed by Engr-in-charge.

M&L fixed in repair 75 mm PVC floor trap ,with grating including jointed to waste pipe including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed by Engr-in-charge.

ITEMS FOR 3DCP WORKS Fabrication and fixing 3D printed reinforced concrete wall. The concrete mix of minimum M25 grade shall be used as specified below. Description of 3D printed concrete panels: (i) Minimum 28 days Compressive strength (obtained from mould-cast cube test) of Concrete used for 3D Printed Concrete panels shall be 25 MPa. Material test report for the grade of the concrete used for 3D printing process should be submitted. (ii) Minimum width of printed layers in panel shall be 30 mm. (iii) Composition of the concrete mix per cubic meter of concrete would be in the following range, and meet the requirement of 25 MPa in hardened state. OPC 53 grade cement: 600kg maximum; Fly ash: 700 kg maximum; Sand: 1300 kg maximum; Water to powder ratio: 0.2 maximum; PCE based super plasticizer: 5 kg maximum. (iv) Provision of anchorages for lifting will be provided in each panel. (v) Methodology of Construction and Quality Control. Manufacturing of the 3D printed concrete panels will be performed using the state-of-the-art, 3D Concrete printing technology. There should not be any cold joints in the printing of any individual panel. The placement of rebars/bolts should not hamper the 3D printing process. The mixing of water in the dry mix should be automated and controlled using a flow meter to ensure that the water-to-cement ratio remains consistent. The material used for 3D printing should not be too stiff, and no visible cracking or layer rupture should be there during and after printing. Proper curing of the panels should be performed during and after printing to ensure that no plastic or drying shrinkage occurs etc.Complete all as specified is manufactures instruction and as directed.

EXCAVATE, ROCK, HARD:- Earthwork in excavation & backfilling below final ground level (Raised Ground level) in foundations, trenches, Rain water gutter etc in hard/dense soil/ hard rock requiring Hydraulic / Pnuematic tools for execution i.e. Jack hammer ; Poclain attached rock breaker ; tractor mounted rock breaker etc. upto a specified depth including dewatering, shoring and strutting if required, refilling the trenches by excavated earth including compaction up to 95% Standard Proctor Density, spreading the surplus earth within plot boundary of Customer OR upto a lead of 500 Mtr. whichever is higher etc. complete as per instruction of Engineer in charge. (Mode of measurement shall be PCC+600mm each Length and width dimension)

DISPOSE, AVAILABLE SURPLUS EARTH Disposal of available surplus earth outside the premises with the help of mechanical transport as and when necessary to the local dumping ground Extra over item No. 30 above, for carriage and removal of surplus excavated earth, debries or rock etc.beyond initial lead of n. exc 500 mtr from starting point as above by mechanical transport, not necessarily all the time on pucca roads, upto an additional lead of 5Km including loading, unloading, transporting, dressing of excavated material etc. complete as per specifications and directed.

APPLY, ANTI TERMITE TREAT, W/CHEMICAL Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment as per IS:6313 Part (II) - 1981and creating a chemical barrier under and around the column pits, wall trenches, basement, excavation, top surface of plate filling, junction of wall and floor along the external perimeter of building floor together with plinth protection, expansion joints, surroundings of pipes and conduits etc. complete (plinth area of building at ground floor only shall be measured). Chlorpyriphos emulsifiable concentrate conforming to IS:8944 - 1978 with 1% concentration (The work shall be get executed by an approved specialist agency and the contractor shall furnish 10 years guarantee on non-judicial stamp paper) 'Providing and injecting chemical emulsion for Pre - Constructional Antitermite (Conforming IS: 6313) treatment and creating a chemical barrier under and around the column pits, wall trenches , basements excavation, top surface of plinth filling, junction of wall and floor , along the external perimeter of building, expansion joints , surroundings of pipe and conduits etc. complete (Plinth area of the building at ground floor only shall be measured) all as specified.

SOLING Providing,Soling laying, ramming and compacting dry rubble stone hardcore /soling in required consolidated 100mm thickness in sub base to required levels and lines with first quality rubble of 90-45mm in stone aggregate including stone screening 13.2mm size and finishing /blinding the surfaces with murrum including watering, consolidated in layers of 15 cm with vibratory compactor etc. complete as per specifications, drawings and as directed by the Engineer-in-charge.

(CONCRETE WORK (PLAIN AND RCC) Plain cement concrete Material and Labour for PCC 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm and down gauge) screed to terrace etc. Providing and laying plain cement concrete of specified grade as bed concrete under foundation, bases for rafts, underground water tank, building machine equipments, column footing, under floor landings, below road and pathways,cill, coping, screeding at roof to required slope and other locations as called for laid, consolidated and cured etc. complete including finishing the top surface to receive the next course / layer as per specification and drawing excluding the cost of centering and shuttering. Complete all as specified and directed by Engineer-in-charge.

RCC WORKS FOR STRUCTURE Providing & laying cast - in - place structural controlled design mix cement concrete of M25 grade using pump with 20mm down gauge coarse aggregates excluding cost of centering, shuttering and steel reinforcement but including cost of making shear keys and provision of construction / control joints in various locations, laid, consolidated and cured, item to include all structural items like base raft, ramp, column, column capitals, wall, footings, equipment foundations, fins, mullions, beams, lintels, pergola, chajja, facia, parapet, railing, slab, trenches, drains and sumps etc. of any shape and sizes. The rates of concrete to include the cost of Fly ash /admixtures / plasticisers/superplasticers/ bonding agent to achieve specified strength and to facilitate pumpable concrete etc complete for all height and level etc all as specified and directed by Engineer-in-charge.

(SHUTTERING AND CENTRING) Material and Labour for form work/shuttering with approved Marine plywood shuttering and centring for structural concrete work in locations called for including strutting, propping, bracing, bolting, wedging, casing, striking, removal etc. complete for any size, section, thickness. Props shall consist of well designed steel pipes adequately braced (wooden ballies as props shall not be permitted). The item to include centering and shuttering at all heights and levels.Allow for forming grooves, drip course, chamfers, cut-outs, openings etc. where called for and for dressing with approved shuttering oil to prevent adhesion. Unexposed concrete surfaces subsequently left untreated (in the condition obtained on removal of form work) shall not constitute exposed concrete work and shall be measured under this item only. Irregular shapes with sides which may not be perpendicular to each other for shapes not conforming to rectangle or square shall not be paid separately. including cost of shuttering and staging material (quoted rate to include all staging upto any height). Complete all as specified and directed by Engineer-in-charge.

Material and Labour for 'Making plinth protection 50 mm thick 750mm wide of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing with cement punning and provide grooves etc Complete all as specified and directed by Engineer-in-charge.

Reinforcement steel Providing and Laying and fixing in position TMT steel reinforcement ( Fe 500 ) in all reinforced concrete work, including straightening, cutting, removal of loose rust by wire brush and coating with cement slurry, bending, hoisting, laying in position to the shape and profile required at all levels and heights as per drawing and design and/ or as directed, The rate shall include cost of binding wire and fixing of couplar and chairs, spacers which will not be measured separately for payment. Quantity of steel as per drawing and with authorised overlaps only shall be measured and paid for and steel should be ( Only Reinforcement steel and couplar will be supplied free of cost by Client) thermo mechanically Treated Reinforcement (TMT and / or High yield strength Deformed (Tor steel) bars of Fe-500 grade complete all as specified and directed by Engineer-in-charge.

FLOORING WORKS Flooring & Skirting,Dado Providing and laying 600 x 600 x 8 mm thk. NITCO, KAJARIA OR EQUIVALENT vitrified tiles (Biege color with glossy finish)as specified conforming to I.S.15622-2006 with water absorbtion less than 0.08% for flooring of an approved, quality, make and pattern /design for flooring including cement mortar bedding of 40 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge. Skirting will be 75 mm high from the finished floor level with 10-15mm thk. motar of 1:3 proportion of same vitrified tile finish in guard room .Complete all as specified and directed by Engineer-in-charge.

M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with gigment to match the shade of the slab including rubbing and mirror polishing over 25mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M & L Non skid ceramic tile 7 to 8 mm thick )square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement match, 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed by Engineer-in-charge.

PLASTERING WORKS INTERNAL PLASTER WORKS Providing and applying 12 thick internal plastering for RC walls, RC columns, beams, masonry piers, masonry walls, etc., in cement mortar 1:6, finished smooth including scaffolding, curing, etc., complete. with all lead and lift and as directed by Engineer in charge rate including providing & fixing in position galvanised 6" wide chicken mesh made out of galvanized iron of nominal thickness 0.35 mm with a Zinc coating of 120 gms per Sqm at the junctions of Masonry and concrete works and other locations as called for including fixing with GI nails, fixing Arpitha Corner Bead of size 45 x 45 mm made out of galvanized iron of nominal thickness 0.45 mm with a Zinc coating of 120 gms per Sqm as protector for plastered wall and column corners/edges from chipping , including tying in position by using suitable nails / clamps / screws etc. to concrete surface & etc, complete. Note: (Quoted Rate shall be for all heights, depths, levels, leads and lifts and to include providing and fixing chicken wire mesh in junction RCC and brick / AAC Block walls etc for internal and external plaster works).

CEILING PLASTER Providing and applying 6mm thick ceiling plaster to RCC slab in cement mortar 1:4 (1 cement : 4 fine and coarse sand in equal poportion) finished smooth including scaffolding, curing, making grooves at desired location etc. complete as per drawing and directed by Engineer-in-charge.

FINISHING WORKS: EXTERNAL PAINT WORKS Finishing External surface of walls with ASIAN PAINT, NEROLAC, BERGER OR EQUIVALENT Premium Acrylic Smooth exterior paint with Silicone additives of required shade over freshly plastered wall surface (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm) untreated wall surface with after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the Engineer in Charge

INTERNAL PAINT WORKS Finishing internal walls with ASIAN PAINT, NEROLAC, BERGER, OR EQUIVALENT Acrylic Distemper Paint of required shade over a properly prepared surface – New work (Two or more coats applied @ 1.40 ltr/10 sqm over and including one coat of primer applied @ 0.80 ltr/10 sqm and two coats of putty applied as required) after thoroughly cleaning, leveling, and preparing the surface smooth using sandpaper, ensuring the removal of all loose particles, dirt, and foreign matter, as specified and directed by the Engineer in Charge. The work shall be carried out in accordance with IS 2395 (Part 1 & 2) – Code of Practice for Painting of Buildings, IS 5410 – Specification for Cement Paint, and IS 428 – Specification for Distemper Paint.

Door and Window Fixing BATHROOM DOOR AND WINDOW FRAMING, JAMB AND CILL Providing and fixing Marble stone work table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) or slab in door frames, window sills etc laid over 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand), jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Complete all as specified and directed by Engineer-in-charge.

MAIN DOOR AND OTHER DOORS FRAME WPC (Wood Polymer Composite) door frames shall be water-resistant, termite-proof, and durable, suitable for both interior and exterior applications, and installed as per approved drawings and site requirements. The frames shall conform to IS 4020 – Tests for Door Shutters and Frames, ensuring structural integrity and longevity. The material shall be of high-quality composite, providing a uniform finish and resistance to warping or decay. Installation shall be carried out using appropriate anchoring methods with PU foam, polymer-based adhesives, or other approved fixing chemicals to ensure a secure and long-lasting fit. Measurement shall be taken in running meter (RM) as per the outer perimeter of the frame, with all work executed as per the directions of the Engineer in Charge and in compliance with the latest industry standards.

DOOR SHUTTERS WPC (Wood Polymer Composite) flush door shutter, 35 mm thick, single leaf, shall be waterproof, termite-proof, and fire-retardant, conforming to IS 4020 – Tests for Door Shutters and Frames, and manufactured using high-density WPC board with a solid core construction. The shutter shall have a smooth, pre-finished surface suitable for polishing, laminating, or painting as per requirements. The door shall be provided and fixed with all necessary hardware accessories, including two door handles (type as per approval), one tower bolt, one door stopper, one main door lock, one door catcher, and a groove provision for three butt hinges, ensuring proper functionality and durability. Installation shall be carried out as per approved specifications and site conditions, with all work executed under the direction of the Engineer in Charge and in compliance with the latest industry standards. Measurement shall be taken in square meters (SQM), including all fittings and fixtures, as per standard market practice.

uPVC WINDOW FABRICATION uPVC three-track sliding window shall be factory-made from high-quality uPVC profiles (Fenesta, Koemmerling, Rehau,or ISI marked ) conforming to IS 12877, with a wall thickness of not less than 2.5 mm and galvanized steel reinforcement for durability. The window shall have three independent sliding tracks fitted with 5mm thick toughened glass (Saint-Gobain or equivalent), ensuring safety and clarity. The system shall include EPDM gaskets, weather seals, nylon rollers with stainless steel ball bearings, and a multi-point locking mechanism for smooth operation and security. Installation shall be carried out with all necessary hardware, including handles, stoppers, and friction stays (if required), ensuring airtight and watertight performance. Measurement shall be taken in square meters (SQM) of the finished opening, with all work executed as per the instructions of the Engineer in Charge and in compliance with the latest industry standards.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil.

M&L for 100mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in hardstanding surfaced finished even and smooth without using extra cement complete over compacted earth all as specified.

M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Sand filling under floors or in foundations complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.

M & L for providing cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping / benching including necessary form work complete all as specified and directed.

M&L for Pre-cast cement concrete Type C1, 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10cm in width and setting in CM 1:6, complete.

M & L Point wiring using approved colour coding as per IS for modular switch and socket in concealed conduit with 1.5 Sq mm FRLS multi stranded copper conductor single core PVC insulated and unsheathed 1100 V grade drawn through conduit and including rigid 20 MM PVC concealed conduit and conduit accessories ISI marked with valid CML No (IS-9537-1983 for conduit and IS:3419:1976 for conduit accessories) medium grade including fixing/grouting with mild steel / pressed steel sunken boxes (with earth dolly) of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm multistranded copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified and directed at site for the followings. NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor 2. Swittches and sockets shall be measured and paid separately.

(a) One light/fan point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M & L Point wiring using approved colour coding as per IS for modular switch and socket in concealed conduit with 2.5 Sq mm FRLS multi stranded copper conductor single core PVC insulated and unsheathed 1100 V grade drawn through conduit and including rigid 20 MM PVC concealed conduit and conduit accessories ISI marked with valid CML No (IS-9537-1983 for conduit and IS:3419:1976 for conduit accessories) medium grade including fixing/grouting with mild steel / pressed steel sunken boxes (with earth dolly) of sutiable thickness covered with suitable modular cover plate including running up of 2.5 Sq mm multistranded copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified and directed at site for the followings. NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor. 2. Swittches and sockets shall be measured and paid separately.

M & L Point wiring using approved colour coding as per IS for modular switch and socket in concealed conduit with 4.0 Sq mm FRLS multi stranded copper conductor single core PVC insulated and unsheathed 1100 V grade drawn through conduit and including rigid 20 MM PVC concealed conduit and conduit accessories ISI marked with valid CML No (IS-9537-1983 for conduit and IS:3419:1976 for conduit accessories) medium grade including fixing/grouting with mild steel / pressed steel sunken boxes (with earth dolly) of sutiable thickness covered with suitable modular cover plate including running up of 4.0 Sq mm multistranded copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified and directed at site for the followings. NOTE: 1. Modular Cover Plate is inclusive of the rated quoted by the contractor 2. Swittches and sockets shall be measured and paid separately.

S&F Sheet metal enclosure Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB (6A-10A)complete all as specified and directed by Engr-in-Charge.Make :- Legrand /L&T/Havells.

M & L for sub main Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ pvc casing capping as required 2x4.0 sq. mm +1x2.5 sq. mmearth wire complete all as specified and directed by Engr-in-Charge.

S&F 5 Star rated Energy Efficient Electric Geyser Vertical Type Copper 25 Litres Storage capacity with Thermostat, Pressure release and all other safety features as per BIS and duly provided with Inlet Outlet chrome plated steel connections, brass stop cocks, grouting with cement on the wall and provided with 2.5 Sq mm copper wiring and 15 Amp Switch Socket incl connection to earth all as specified and directed by Engr-in-Charge.

S & F Modular switch 1 way 6 Amp,1 module 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F Socket, 6 Amp - 2/3 pin combined 2module,or 3 pin / 5 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 3 pin, 5 Amps, 3 module,flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F Switch socket Combination 16A, 6 pin, 3 module , flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.

S&F MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame 3 Module Complete all as specified and directed by Engr-in-Charge.

S&F MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame 4 Module Complete all as specified and directed by Engr-in-Charge.

S&F MODULAR METAR FLUSH BOX Metal flush box 3 module Complete all as specified and directed by Engr-in-Charge.

S&F MODULAR METAR FLUSH BOX Metal flush box 4 module Complete all as specified and directed by Engr-in-Charge.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing for Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed. Make :- Bajaj /Philips/Havells

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22 Watt, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make :- Bajaj /Philips/Havells .

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB 8 way sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for complete all as specified and directed. Make :- Legrand/L&T/Havells

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and currentcarrying Capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make :- Legrand/L&T/Havells

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. Make :- Legrand/L&T/Havells

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed. Make :- Jindal/ Tata / Prakash surya

Supply and fixing LED street light fitting 35 Watt 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.Make :- Bajaj/ Crompton/Philips

Supply and fix exhaust fan250 MM Sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm all as specified and directed. Make :- Bajaj/Anchor/Usha

Supply and fixing for LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete.(Suitable for ceiling mounting) Make :- Bajaj /Philips/Havells

Supply and fixing for LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vaporgroup of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc.Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.Make :- Bajaj /Philips/Havells

S& F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 2 core 10 sqmm all as specified and directed.Make :- Havells/Polycab/Finolex

Supply and fix exhaust fan 380 mm Sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 300, Copper winding of sweep 380 mm all as specified and directed.Make :- Bajaj/Anchor/Usha

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Make : - Bajaj/Havells/Philips

Deduct Schedule of Credit of Rs (-) NIL- (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3406222)

osho traders (BID ID -3406534)