Repairs and renovation of guest room toilet and allied works of HQ 6 Sector Assam Rifles Kashiram Basti

Amount

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Make: Asian paint/Berger/ Nerolac/Duluxe paint or equivalent.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. Make: Asian paint/Berger/ Nerolac/Duluxe paint or equivalent approved brand.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level

Supplying and filling in plinth with local sand under floors, including watering, ramming, consolidating and dressing complete

Providing and laying two layers of 75 mm thick compacted flooring bed of dry brick / stone aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with local sand, including finishing smooth etc. complete as per direction of Engineer-in-charge: Thinkness 75mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and fixing Vitrified wall tiles in different sizes (thickness to be specified by manufacturer) as per direction Engineer-in-Charge, with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make & size, in all colours & shade, in skirting, riser of steps, dado over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Make: Kajaria/ Johnson/ Somany or equivalent.

Providing and laying rectified Glazed Ceramic Non-skid tiles / floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Make: Kajaria/ Johnson/ Somany or equivalent quality as approved by Engr- in-Charge.

15 mm cement plaster on the half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Dismantling of EWC with flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge Extruded section profile size 48x40 mm

Providing and fixing 24 mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc.,with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel / uPVC of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing uplasticised PVC connection 20 mm nominal bore pipe with brass unions of 45 cm length in geyser points and wash basin mixer.

Providing and fixing 18 mm thick granite stone wash basin counter size of 1200mm length x 700mm width on existing half brick wall i/c recess on wall, mirror polished, moulding of edge and making good the walls wherever require complete, as per directions by Engr-in-Charge.

Providing and fixing counter top wash basin, basin mixer i/c bottle trap 150mm, Waste Coupling all fittings complete i/c cost of removing the existing wash basin and cutting and making good the walls wherever require complete,as per directions by Engr-in-Charge. Made by Jaquar/Cera/ Parryware/ Hindware or equivalent. (a) Cera Cliff wash basin (color snow white) (b) New Cat No: F8060403 bottle trap and waste coupling half F8050102 ( Note: Basin mixer shall be supply by Dept)

Providing and fixing fountain wall mixer with bend pipe for overhead shower including the cost of overhead rain shower 8''x8'' with arm all necessary fittings complete . Made by Cera/ Parryware/ Hindware or equivalent. Cera Cat No. F2013401 wall mixer, F7010102 Overhead shower, F7040105 arm.

Providing and fixing floor Trap with cover for one for Wash basin and one for bathroom floor drain including the waste pipe of 50 mm dia 4.00 metre length with necessary fittings. .

Providing and fixing 2-way angle cock with wall flange.

Providing and fixing Health Faucet ABS body (push type) with wall hook and 1.00m long SS braided rubber i/c angle cock with wall flange.

Providing and fixing mirror 5mm thick with double coat for protection and longevity, grounded edges for safety plating on the back for better reflection i/c all necessary fittings complete. Size: 700x500mm. Cera New Cat No: B3510106 & Old Cat No: 5555.

Providing and fixing C.P. brass angle valve for basin mixer, geyser points and flushing chistern of approved quality conforming to IS:8931 a) 15 mm nominal bore

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Kiln seasoned and chemically treated hollock wood.

Fixing of 4 mm thick ply board in false ceiling with necessary fittings all complete (Ply board shall be supply by Dept)

Providing and fixing wooden moulded beading to Ceiling with iron screws, plugs and priming coat on unexposed surface etc. complete : Kiln seasoned and chemically treated hollock wood 50x20 mm

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Fixing fixing precoated galvanised iron profile sheets with using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Precoated galvanised iron profile sheets shall be supply by Dept)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ submain wiring along with earth wire with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing 15/16 amp modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Supplying and fixing 6 pin 15/16 amp socket outlett modular type switch/ socket on the existing switch box/ cover including connections etc. as required

Supplying and fixing 1 or 2 Module (200mmX150mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

Supplying and Installation of exhaust fan including making the hole/opening in brick masonry wall by cutting to suit size of exhaust fa n including making good the damage with plastering and necessary wiring with 1.5Sqmm wire, connection, testing, commissioning etc. as required. Upto 300 mm sweep

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia

Taking out to existing hand wash basin and refixing wash basin with brackets, pillar taps, waste pipe including painting of fittings and brackets, cutting and making good the walls wherever require and providing and fixing CPVC pipe of 20 mm dia of 3.00 m length all complete.

BG engineering works

CENTURY ENTERPRISES