Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC T 20 FIRDOSHI MASJID WARD NO 08 NEAR TANK MEHRAULI NEW DELHI 110030 | SOUTH | DELHI | 110030 | L1 | Accepted-AOC L1 | |
| 2 | L2₹10.0 L+₹58,202.45 (6.18%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹10.4 L+₹94,088 (10.00%)Rejected-Finance | L3 | Rejected-Finance Rejected |
Tender Value
₹10.4 L
EMD Value
₹20,809
Closing Date
16 Oct 2023, 10:00 amClosed
Executive Engineer
Office of the Executive Engineer,EE(Elec) Division,SZ
Boring of Tube well at MCD Primary School Bhati Mines in ward no 158 under South Zone.
2023_MCD_170010_1
MCD/TR/6663/2023_6_1_1/1
Open Tender
Electrical Works
Item Rate
20 days
South, Bhatti
6 documents required · 6 mandatory
₹590
₹20,809
1 Apr 2024
9 Oct 2023
16 Oct 2023
9 Oct 2023
16 Oct 2023
9 Oct 2023
Amount
122.2.145.(b):Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders-300mm
122.2.146.(b):Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.Rocky strata including Boulders-300mm
122.2.149A.(b):Providing, lowering and fixing/placing in vertical position MS Black casing medium ( B-class) pipe of following size conforming to IS 1239/3589 Part-I (2004) at all depth, both ends threaded as required. 150mm(Nominal Bore)
122.2.149B.(b):Providing, lowering and fixing/placing in vertical position MS Slotted casing medium ( B-class) pipe of following size conforming to IS 1239/3589 Part-I (2004) at all depth, both ends threaded as required. 150mm(Nominal Bore)
122.2.149B.(c):Providing, lowering and fixing/placing in vertical position MS Slotted casing medium ( B-class) pipe of following size conforming to IS 1239/3589 Part-I (2004) at all depth, both ends threaded as required. 200mm(Nominal Bore)
122.2.149A.(c):Providing, lowering and fixing/placing in vertical position MS Black casing medium ( B-class) pipe of following size conforming to IS 1239/3589 Part-I (2004) at all depth, both ends threaded as required. 200 mm(Nominal Bore)
122.2.157:Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
122.2.154B.(c):Supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. Three Phase 5.0 HP having discharge of 300 LPM Approx. at 39 M Head.
122.2.156.(c):P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. 3x 6 sq.mm
122.2.158.(a):Supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i/c clips etc complete as reqd. 6 mm
122.2.150.(d):Supply, lowering and fixing following size of G.I. Pipe (M-Class) i/c cutting threading on both sides etc. ISI marked etc as reqd. 50mm(Nominal Bore)
122.2.151.(d):S & F following size of G.I. Socket. as reqd. 50mm
122.2.152.(d):S & F following size of G.I. Union. as reqd. 50mm
122.2.153.(d):S & F following size of G.I. Elbow. as reqd.. 50mm
122.2.43:S.I.T.C of Hot Press moulded SMC panel/Canopy Box of size(OD) 920 mm x 460 mm x 260 mm & (ID) 900 mm x 450 mm x250 mm , anti - corrosive, dust proof, rust proof, shock proof , Self-extinguishing property , resistant to heat , Vermin proof, Ultra Violet stabilized, Pilfer resistant, Suitable for mounting 1 no. 3 phase Starter, 1 no. 63 Amp 4 pole isolator and 1 no. 3 phase Energy meter, Socket for outgoing connection with pilferage proof SMC door duly welded with S/S handle having danger logo on its outer surface and with 1 no Hot Dip galvanized iron stand for a base of size 40 mm x 40 mm x 5 mm and height of the stand is 600 mm including 300 mm height below the ground with side strip of size 25 x 5 mm.
122.2.160.(b):S & F MS clamp made up of iron flat of size 50X6 mm with 4 nut bolt for holding the GI pipe pipe as reqd. 50 mm
122.2.175:Supply & Installation of wall mounted RO plus UV plus UF water purifier with up to 20 L/hr purification capacity and storage tank up to 09 liter capacity.
122.1.28:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*10 sqmm
OD10318/2023-2024:Supply and fabrication of pole protection system made up 8 SWG steel wire mesh of size 25 mm x 75 mm rectangular with 50 mm x 50 mmx6mm MS angle iron for supporting the mesh i/c MV Danger Plate anf grounding the protection system in suitable quality of CC etc.
OD10319/2023-2024:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
OD10479/2023-2024:Supply, and fixing following rating four pole (three phase and neutral)415 V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commissioning etc as required.63A.
OD10484/2023-2024:Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A,30KA,FPMCCB
OD10487/2023-2024:Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal).
OD10488/2023-2024:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
OD10492/2023-2024:Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral
OD10495/2023-2024:Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size in the existing RCC/Hume /Metal pipe as required. (a) upto 35 sqmm
OD10505/2023-2024:Providing and fixing 25 mmX 5mm G.I. strip on surface or in recess for connection etc.as required.
122.2.155.(d):Supply, Installation, testing and commissioning of cubical type control panel board for single phase & Three Phase submersible pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. 5 HP (Three Phase)
DSR Civil
OD10474/2023-2024:23.12-Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
Pee Kay Electric Works
Dev Enterprises
Bidder Name
Pee Kay Electric Works
Dev Enterprises
LIMRA ENGINEERING WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .