Civil Work

Amount

Attending all day to day maintenance complaints of carpentry works complete excluding the cost of materials but including cost of washers, nails, clamps, screws ,drill machine,bit etc and for all lead & lift etc as per direction of Engineer-in-Charge. The material required for maintenance shall be arranged at site by the agency and will be paid separately. For the purpose of attending day to day complaints, one assistant carpentor should be available daily and one log book has to be maintained by the staff of contractor duly verified by SDO/JTO(Civil) on daily basis as a proof of attending complaints. (One job will be defined / consists execution of all above items for all required / working days in a month). Cost of all T&P like washers, nails, clamps, screws,feviquick ,fevicol,drill machine,bit etc ladder etc for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of "supply of material " of the agreement.

Engaging helper for attending day to day maintenance jobs for /carpentry & all other works related to day to day maintenance.( One job will be defined/ consists execution of all items for the working days as well as on holydays as & when required in a month),All T&P like washers, nails, clamps, screws,feviquick ,fevicol,drill machine,bit etc ladder etc for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of "supply of material " of the agreement.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood/hard wood.

30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to40 mm thick :

Kiln seasoned and chemically treated hollock wood/hard wood. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS1328 BWR Type

Providing wood work in frames of doors/Windows and, clear story window other frames, wrought framed and fixed in position including cost of all nails, screws etc but exluding labour cost for fixing.

Second class teak wood

Kiln seasoned and chemically treated Hollock wood/ Hard wood

Renewing glass panes, with putty and nails wherever necessary including cost of all nails, screws etc but exluding labour cost for fixing.

Glass panes of 4mm thick.

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of thickness 4 mm .

Refixing old glass panes with putty and nails .

Credit of materials / items obtained from dismantling being unserviceable.

MS fittings for doors & windows like SDB, TB, Handle, Hinges etc

Aluminium fittings for doors & windows like SDB, TB, Handle, hinges etc.

Hydrolic door closer, hydraulic floor springs

12 mm thick prelaminated particle board with both side decorative lamination .

5 mm thick float glass panes

Anodised aluminium section

Credit of wooden door/ windows shutter i/c fittings obtained by dismantling etc. and disposal of unserviceable material within 50 m lead etc. of area up to 2.50sqm.

Repairing of doors and windows (Steel / wood/aluminium/pvc) at site with welding of hinges, sawing and repairing edges etc. and repairing of sides & jambs if required for their smooth functioning etc as directed by Engineer-in-charge. All T&P nails etc required for attending the work shall be arranged by the contractor and nothing extra shall be paid for.

Repairing of windows grill, railing etc by welding with Electric plant / gas plant including transportation of welding plant at site & other required T&P is to be arranged by Agency. MS sections shall be paid for separately.

Repairing and service of rolling shutter by taking out shutter top cover and cutting and tightening spring with welding and refixing the same in proper to make it operational including greasing ,oils,welding ,spring,ball bearing all complete as per direction of engineer incharge.

Repairing and service of compound gate of any size by taking out gate of single or double (leaf) including taking out (if required) and refixing the same including transportation charges of welding machine (steel member if provided shall be paid in seprate basic item) with welding to make it operational all complete as per direction of engineer incharge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

SUPPLY OF MATERIAL Providing / supplying and fixing following anodised aluminum fittings with nail, screws etc where ever required but excluding labour cost.

Aluminium sheet

Anodised aluminium Sliding door bolt 250 x 16 mm

Anodised aluminium Tower bolt 200 x 10 mm

Anodised aluminium Handles 125 mm

Aluminium hanging floor door stopper with twin rubber & stopper

Hydraulic door closer TUBULAR design type, Aluminium section body (ISI Mark)

Double action floor door spring for aluminium doors with stainless steel cover plate ISI marked best quality

Providing / supplying and fixing following MS black / bright finished fittings with nail, screws etc where ever required but excluding labour cost.

Handles 100 mm

Hasps and staples (safety type) 115 mm

Butt Hinges 100 x 58 x 1.90 mm

Butt Hinges 75 x 47 x 1.70 mm

Nickel plated M.S. pipe curtain rod 20 mm dia not less than 1.00 mm thickness with M.S. bracket if required

M.S. Wire gauge of 0.56 mm dia for renewing of wire gauge of doors & windows including new wooden beading of required size if required as per site condition

M.S. oxidised single acting spring hinge with screws.

M.S. Wire fabric of size 20mmX20mm mesh of 1 mm dia in windows with necessary wooden beading(paid in seprate item) and welding screws etc..

Providing / supplying and fixing following MS oxidised fittings with nail, screws etc where ever required but excluding labour cost.

Sliding door bolts 300 x 16 mm

Sliding door bolts 250 x 16 mm

Tower bolts (barrel type) oxidized mild steel 250 x 10 mm

Tower bolts (barrel type) oxidized mild steel 150 x 10 mm

M.S. Handle (fastener) for steel windows including bolts and nuts and washer 150 mm

Oxidised M.S. Casement stay(Straight peg type) 300 mm

Expandable fastener of specified size 25 mm long

Expandable fastener of specified size 32 mm long

Expandable fastener of specified size 40 mm long

Expandable fastener of specified size 50 mm long

Expandable fastener of specified size 75 mm long

Providing / supplying and fixing panelling to doors & windows with nail, screws, adhessive etc where ever required but excluding labour cost.

12 mm thick BWP commercial ply on both faces.

6 mm thick BWP commercial ply on both faces.

Providing / supplying and fixing wooden boards in shelves, counters, drawers, wall panelling etc with nail, screws, adhessive, lipping as directedby Engineer in charge etc where ever required but excluding labour cost.

18 mm thick block board (BWP type ISI marked) including lipping and beading on exposed face.

12 mm thick flat pressed 3 layer and grade I, type II confirming to IS:12833 (Exterior grade prelaminated particle board with both side decorative lamination .

12 mm thick flat pressed 3 layer and grade I, type II confirming to IS:12833 (Exterior grade prelaminated particle board with one side decorative lamination and other side balancing lamination,

5 mm thick(float glass) glazing in aluminium door,window,ventilator with EPDM rubber/neoprene gasket.

Providing / supplying and fixing of 1.00 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 204

Providing / supplying and fixing furniture fittings catcher, pivot, lock etc to drawers, counters, tables almirah etc with nail, screws, adhessive etc where ever required but excluding labour cost.

Magnetic catcher double strip horizontal type

Telescopic drawer channel 300mm long

Aluminium handle (AC15) round shape Projected.

MISCELLANEOUS BUILDING WORKS Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 2nd class teak wood lipping / moulded beading of size 25mmX25 mm fixed with wooden adhesive of approved quality and screws /nails as per direction of Engineer-in-charge but excluding cost of labour.

Providing and fixing 2nd class teak wood lipping / moulded beading of size 20mmX5mm fixed with wooden adhesive of approved quality and screws /nails as per direction of Engineer-in-charge but excluding cost of labour.

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete excluding labour cost for fixing :

(a) 75x40x2.5 mm (ordinary type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete excluding labour cost for fixing :

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality) excluding labour cost for fixing:

Providing and fixing bright finished brass handles with screws etc. complete excluding labour cost for fixing :

Providing and fixing aluminium door sill with necessary screws all complete excluding labour cost for fixing.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 lever without pair of handles with necessary screws etc. complete (best make of approved quality) excluding labour cost for fixing:

Refabrication and fixing aluminium /wooden /pvc partitionsd and doors,windows from the available departmental material including cost of cutting the material to requrired size and carriage to site in the campus ,providing pivot ,fixing all components and fitting as direction of engineer in charge.

Dismantling aluminium /wooden /pvc partitions including false ceiling and doors,windows and stacking the material with in 50 meters lead as per direction of engineer in charge.

SAI CONSTRUCTION CO