REPAIR AND MAINT OF RO, PLANT, FILTERATION PLANT, SOLAR WATER HEATING SYSTEM INCLUDING GEYSER AND OTHER CONNECTED WORKS AND REPAIR REPLACEMENT AND MAINTENANCE OF INTERNAL WIRING AND MISC CONNECTED ITEMS OF ARMY UNITS OF DHARMUND UNDER AGE (I) BHALRA

Amount

Dismantling and refixing the complete unit of unserviceable Solar Water Heater Plate with Solar Water Heater Plate (Set of 3) of capacity 500 LPD installed at various sites complete including repairing / replacing all defective parts such as Copper tubing, taughned glass, hot water tank, nuts, bolts, washers and all other minor accessories as required at site including painting the solar water heater water tank by rubbing the old paint and applying with two coats of synthetic enameled paint by spray painting where necessary and testing the same after repair all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of following items / spares in replacement for Solar Heaters of various capacities as mentioned in Serial No 1 here-in-before all as specified and directed by Engr-in-charge :- (a) Heating element of capacity upto 2 KW (Electric rod) having rubber washer of size suitable size complete all as specified.

(b) Glycol (Anti freezing solution) for filling in copper tubes complete all as specified.

(c) Coupling gasket

(d) Hot rubber pipe of 20mm dia complete all as specified and directed

(e) Float valve assembly 25mm dia complete all as specified.

(f) Thermostat suitable for solar heater complete all as specified

(g) Dead flange with nut bolts and washers complete all as specified.

(h) Temp gauge 0 to 200 degree centrigade all as specified.

Taking up or down old unserviceable GI pipe medium grade galvanised with all fitting laid in trenches/on wall /floor /ceiling with clamps complete all as specified of size 15 mm dia complete all as specified and directed by Engr-in-charge.

Taking up or down old unserviceable GI pipe medium grade galvanised with all fitting laid in trenches/on wall /floor /ceiling with clamps complete all as specified of size 20 mm dia complete all as specified and directed by Engr-in-charge.

M&L for GI pipe medium grade galvanised with all fitting laid in trenches/on wall /floor /ceiling with clamps complete all as specified of size 15 mm dia complete all as specified and directed by Engr-in-charge.

M&L for GI pipe medium grade galvanised with all fitting laid in trenches/on wall /floor /ceiling with clamps complete all as specified of size 20 mm dia complete all as specified and directed by Engr-in-charge.

S & F in repair sheet metal enclosure for DBs single door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 4 Way complete all as specified and as directed by Engr-in-charge.

S & F in repair for MCB SPN 'C' series, 32 Amp , 230 Volts complete all as specified and as directed by Engr-in-charge.

S & F in repair for MCB 'C' series, single pole 6-32A, 240 V complete all as specified and as directed by Engr-in-charge.

On-site Repair / Maintenance and Servicing of RO plants by dismantling, checking all parts i.e. Pre-filter, granular activated carbon block filter, membrane, UV disinfection / filtration system, adaptor, pressure pump set, main pump motor, solenoid valve, flow controller, all gauges, filling of anti-scalent liquid, checking functioning of all type meters, electric wiring, contactors & relay, switches, valves and replacement of old unserviceable parts, checking of leakages of any part of plants and pipe line by new parts and pipe line including re-assembling the same as original and reinstalling at same place including re-connecting with the existing water supply system and testing at full capacity discharge of filtered water complete all as specified and as directed of the following description complete all as specified and directed by Emngr-in-charge. (a) RO Plant of 150/250 Ltrs/Hours capacity Notes for Serial Item No 10 :- 1. Spare parts required for replacement of the defective parts to make the RO Plant fully functional shall be measured and paid separately under appropriate item of this Schedule as 'Supply only'. 2. The Contractor will ensure that all RO plants are functional throughout the contract period by detailing his technical team once in each month though out the contract period for servicing and maintenance. 3. In the eventually of any RO plants not working after the last service and before the next service, the contractor will attend the complaint within 72 hours of intimation of the complaint through SMS / e-mail / WhatsApp message from JE (E/M) / AGE (E/M). The Visit charge due to any such complaint shall be deemed to be included in the quoted rates against Serial item No 01 and nothing extra shall be admissible on this account. 4. In case the Contractor fails to attend the complaint and does not make the plant serviceable within stipulated time frame of 72 hours, a Panel Recovery of `500.00 per day per plant will be deducted for each day of delay. 5. The Contractor may claim part payment for each quarter as per the work done. Contractor shall produces Job card duly indicating details of parts replaced duly signed by the User Rep, JE (E/M) & AGE (E/M).

Repair / Maintenance of Feeding Pump of 0.37 KW / 0.5 HP installed in RO plant at various locations by disconnecting of RO plant carefully for repair, rewinding with super enamelled copper winding wire of suitable size, greasing, change of capacitor, bearing etc and reassembling of pump at its original position, complete all as specified and directed by Engr-in-charge.

Repair / Maintenance of Pressure Pump of 1 to 1.5 HP installed for RO/water filtration plant at various location by disconnecting of filtration plant carefully for repair, rewinding with super enamelled copper winding wire of suitable size, greasing, change of capacitor, bearing etc and reassembling of pump at its original position, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of Feeding Pump suitable for RO filtration plant of rating 0.37KW/0.5 HP, 230 volts, 50 Hz, Single phase, 20 mtr head and discharge rate 40 LPM, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of Pressure Pump suitable for small water filtration plant of rating 0.75/1.0 KW/HP, 230 volts, 50 Hz, 3 stage & discharge rate 50/150 LPH, complete all as specified and directed by Engr-in-charge..

Supply & fixing in repalecement of Pressure Pump suitable for small water filtration plant of rating 1/1.50 KW/HP, 230 volts, 50 Hz, 5 stage and discharge rate 250-750 LPH, maximum head 47 meter, complete all as specified and directed by Engr-in-charge.

Maintenance and Repair of Control Unit with replacement of defective parts of RO plant of capacity 50/150/250 LPH complete all as specified and as directed by Engr-in-charge.

Supply & fixing in repalecement of Pre-Filter (Micronic Filter) candle of following size, complete all as specified and directed by Engr-in-charge. (a) Size 20 inch

Supply & fixing in repalecement of Carbon block Filter of following size, complete all as specified and directed by Engr-in-charge :- (a) Size 20 inch

Supply & fixing in repalecement of Membranes of following capacity, complete all as specified and directed by Engr-in-charge :- (a) 50 LPH

Supply & fixing in repalecement of ultra violet system (UV) for 50LPH/150 LPH / 250 LPH / 500 LPH RO plant, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of flow restrictor adjuster of following capacity, complete all as specified and directed by Engr-in-charge :- (a) 50 LPH

Supply & fixing in repalecement of only Chemical Dozing System (AD system for antiscalent liquid) for RO plant, complete all as specified and directed by Engr-in-charge..

Supply & fixing in repalecement of Micronic Shell (Filter housing) of following size, complete all as specified and directed by Engr-in-charge :- (a) 20 inches

Supply & fixing in repalecement of Anti-scalant Liquid (membrane protector), complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of Bib Tap, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle,both ends screwed for iron pipe or for union etc., complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement ofStop Valve, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of CPVC pipe of outer dia 16mm size, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of CPVC pipe of outer dia 20mm size, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of elbow for CPVC pipe of 16mm size, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of elbow for CPVC pipe of 20mm size, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of CPVC union of 16mm size, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement ofCPVC union of 20mm size, complete all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of only capacitor of 10 MFD, complete all as specified and directed by Engr-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 3 Core 16 sqmm nominal cross section in service connections complete all as specified and directed by Engr-in-charge.

Taking down carefully Geyser of capacity 25 ltrs from its position for repair/servicing such as removal of dust, checking, replacing worn out parts, rubber etc, re-assembling at its position after repair, testing & commissioning & connecting to electric system with suitable size cable, complete all as specified & directed by Engr-in-charge. Note : Rates quoted by contractor shall deemed to be inclusive all minor items and no extra payment shall be admissible except for the items which are to be replaced which shall be measured and paid separately under respective item of Schedule 'A'.

Supply & fixing in repalecement of galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., , fixed complete to walls and ceilings or laid in floors, complete including taking down all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement ofgalvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc. fixed complete to walls and ceilings or laid in floors, complete including taking down all as specified and directed by Engr-in-charge.

Supply & fixing in repalecement of geyser steel tank of capacity 25 ltrs, complete all as specified & directed by Engr-in-charge.

Supply & fixing in repalecement of heating element for geyser, 1500 watt, round type, complete all as specified & directed by Engr-in-charge.

Supply & fixing in repalecement of heating element for geyser, 1500 watt, triangle type, complete all as specified & directed by Engr-in-charge.

Supply & fixing in repalecement of thermostat suitable for geyser of any capacity, complete all as specified & directed by Engr-in-charge.

Supply & fixing in repalecement ofstop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed & directed by Engr-in-charge.

Supply & fixing in repalecement of Bib tap, 15mm bore, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repair, complete all as specified & directed by Engr-in-charge.

Supply & fixing in repalecement of PVC connection 15mm dia, 900mm long with brass CP nuts and washers at both ends for hot water & Cold Water , fixed in repair, complete all as specified & directed by Engr-in-charge.

Taking down carefully copper /aluminium point wiring (light, fan ,socket or power point ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, socket, lightfitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately ) and making good disribution surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-charge.

Materials and Labour point wiring with multistranded copper conductor of size 1.5 sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping and assessories of suitable size for concealed wiring including 1.50 sqmm copper earth wire (green colour) FRLS cable as earth continuity conductor connected to main earthing and common earth terminal for one ligh point or fan point or bell point controlled by one No, one way switch using cable of different insulation coloour for colour coding including 3 mm thick laminated sheet cover, mild steel or cast iron boxes including making good to distrubed surfaces of wall/ floor, complete all as specified and as directed by Engr-in-charge

All as per the description of serial item No 2 here in before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed by Engr-in-charge

All as per the description of serial item No 2 here in before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed by Engr-in-charge

All as per the description of serial item No 2 here in before but for one 3 pin socket outlet 15 Amp independent board with cable of size 2.5 Sqmm with 1.5 sqmm copper conductor in green colour for earth continuity conductor, complete all as specified and as directed by Engr-in-charge

S&F for switch piano flush type 5/6 Amp single pole one way including taking down all as specified and directed by Engr-in-charge.

S & F Socket outlet 2 in 1, 3 pin 5/6 Amp flush type complete including taking down, all as specified and directed by Engr-in-charge

Supply and fix in replacement of switch piano , flush type single pole, one way 15 Amp universal including taking down and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of socket , 2 in 1, 5 pin, 5 and 15 Amp flush type universal including taking down and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of switch socket combination with gang box 2 in 1, 5 pin 5/15 Amp, flush type single pole, universal including taking down and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of switch socket combination with gang box 2 in 1, 5 pin 5 Amp, flush type single pole, universal including taking down and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of bell push, flush type 5 Amp, 220 volt all as specified and directed by Engr-in-Charge

Supply and fix in replacement of Buzzer, Ding Dong AC. 230 volts, single pole all as specified and as directed by Engr-in-charge

M&L Ceiling rose, 3 phase/PVC/Polycarbonate, isolated body and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet for ceiling fan 1400/1200 mm sweep . complete all as specified and as directed by Engr-in-charge

Supply and fix in replacement of 3 Pin, Plug Top 5/6 Amp, 220 volt complete all as specified and directed by Engr-in-charge. Make Anchor Cat Part No 39571/51348

Supply and fix in replacement of 3 Pin, Plug Top 16 Amp, 220 volt complete all as specified and directed by Engr-in-charge.

Materials and Labour point wiring with multistranded copper conductor of size 1.5 sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping 20/30mm size or as requred at site including its fittings and fuxtures such as ties, bends elbows and junction boxes etc, including 1.50 sqmm copper earth wire (green colour) FRLS cable as earth continuity conductor connected to main earthing and common earth terminal for one ligh point or fan point or bell point controlled by one No, one way switch using cable of different insulation coloour for colour coding including mild steel sunken box/PVC box and inner and outer modular plate for mounting of Modular switches including cutting chases and making good to distrubed surfaces of wall/ floor, complete all as specified and as directed by Engr-in-charge

All as per the description of serial item No 18 here in before but for one 3 pin modular socket outlet 5 Amp independent, complete all as specified and as directed by Engr-in-charge

All as per the description of serial item No 18 here in before but for one 3 pin modular socket outlet 5 Amp on same board, complete all as specified and as directed by Engr-in-charge

All as per the description of serial item No 18 here in before but for one 3 pin modular socket outlet 15 Amp independent board with cable of size 2.5 Sqmm with 1.5 sqmm copper conductor in green colour for earth continuity conductor, complete all as specified and as directed by Engr-in-charge

S&F modular switch 6 Amp 1 module single pole one way including taking down all as specified and directed by Engr-in-charge. .

S & F modular Socket outlet 2 in 1, 3 pin 6 Amp 2 module flush type complete including taking down, all as specified by Engr-in-charge

S&F for modular switch 16 Amp 2 module single pole one way including taking down all as specified and directed by Engr-in-charge. .

M&L modular socket , 5 pin, 6 and 16 Amp 2 module flush type universal including taking down and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of modular fan regulators, 2 Module all as specified and as directed by Engr-in-charge

Supply and fix in replacement of modular bell push 6 Amp, 1 Module all as specified and as directed by Engr-in-charge

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting. complete all as specified and as directed by Engr-in-charge

Supply and fix in replacement of MCB DB 2 - way, single door, 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail & DB's will be fitted concealed in wall / surface as per site requirement including taking down and all specified and directed by Engr-in-charge.

Supply and fix in replacement of MCB DB 4 - way, single door, 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail & DB's will be fitted concealed in wall / surface as per site requirement including taking down and all specified and directed by Engr-in-charge.

S&F MCB DB 8 - way, single door, 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail & DB's will be fitted concealed in wall / surface as per site requirement including taking down and all specified and directed by Engr-in-charge.

Supply and fixing in repair TPN DB's 4 way vertical type (VTPN) 415 V, factory made IP 43 protection class metal double door with 200 Amps rating Bus Bar 240/230 Volts, Neutal link, earth bar and Din Rail, provn for fixing of 01 No MCCB 63 Amps as incomer and fixing of MCB/iSOLATOR/RCCB etc complete all as specified and directed by Engr-in-charge

Supply and fixing MCCB 63 Amps, 3 Pole, 16 KA, fixed type, suitable to be fixed in 4 way TPN DB complete all as specified and directed.

Supply and fix in replacement of MCB DB 4 - way, 'Double Door', 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail including taking down and all specified and directed by Engr-in-charge.

S&F MCB DB 8 - way, 'Double Door', 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail including taking down and all specified and directed by Engr-in-charge.

S&F MCB DB 12 - way, 'Double Door', 240 volts for Sheet Steel, Phosphatised, Powder Painted MCB DBs with Bus Bar,Neutral Link, Earth Bar and Din Rail including taking down and all specified and directed by Engr-in-charge.

Supply and fix in replacement double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din rail & DB's will be fitted concealed in wall / surface as per site requirement complete all as specified and directed .

Supply and fix in replacement of MCB SP 6-32 Amps 'B' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete including taking down all as specified and directed by Engr-in-charge.

Supply and fix in replacement of MCB SP 40 Amps 'B' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete including taking down all as specified and directed by Engr-in-charge.

Supply and fix in replacement of MCB SPN 32 Amps 'B' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete taking down all as specified and directed by Engr-in-charge.

Supply and fix in replacement of MCB SPN 40 to 63 Amps 'B' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete taking down all as specified and directed by Engr-in-charge.

Supply and fix in replacement of MCB TPN 40 to 100 Amps 'B' series 415V 50Hz 10 KA suitable for lighting and other domestic loads including taking down all as specified and directed by Engr-in-charge.

Supply and fix in replacement of 1100 volts grade heavy duty cable with PVC insulated aluminiuum stranded conductor served with an inner sheating of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire one twin core 10 sqmm solid conductor all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of 1100 volts grade heavy duty cable with PVC insulated aluminiuum stranded conductor served with an inner sheating of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire one twin core 16 sqmm solid conductor all as specified and directed by Engr-in-Charge.

S&F in replacement of sub Main Wiring in PVC Conduit with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x2.5 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor of size 2.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing conduit complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete.

S&F in replacement of sub Main Wiring in PVC Conduit with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4.0 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor of size 4.0 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing conduit complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete.

S&F in replacement of sub Main Wiring in PVC Conduit with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6.0 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor of size 6.0 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in existing conduit complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete.

Supply and fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

M&L for earthing in repair to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I complete all as specified and directed by Engr-in-charge.

Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc. As required 4 mm dia galvanised iron or steel wire complete all as specified and directed by Engr-in-charge

Supply and fixing in replacement rigid non-metallic PVC conduit 20 MM DIA exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as coupler, lock, nuts, saddles, pipe hooks etc. complete all as specified and directed by Engr-in-charge

Supply and fixing in replacement rigid non-metallic PVC conduit 25 MM DIA exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as coupler, lock, nuts, saddles, pipe hooks etc. complete all as specified and directed by Engr-in-charge

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.

S&F in replacement of enviroment friendly indoor decorative 10 Watt LED mirror light polycarbonate Batten with opal diffuser including all accessaries all as specified and directed by Engr-in-charge.

S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement of slim LED Panel light round, compact, aluminium die cast edge lit panel, Recess mounted round fixture with opal diffuser and separate electronic driver round shape 6 watt, 3000K, in warm white/cool day light (as per site requirement) colour and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of slim LED Panel light round, compact, aluminium die cast edge lit panel, Recess mounted round fixture with opal diffuser and separate electronic driver round shape 12 watt, 3000K, in warm white colour/cool day light (as per site requirement) and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of slim LED Panel light round, compact, aluminium die cast edge lit panel, Recess mounted round fixture with opal diffuser and separate electronic driver round shape 15 watt, 3000K, in warm white colour/cool day light (as per site requirement and all as specified and directed by Engr-in-charge.

Supply and fix in replacement of LED luminaire slip panel light in warm white/cool day light (as per site requirement) 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of LED square batten 5 W 500 lumen (Mirror Light) with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete all as specified and directed by Engr-in-charge.

S&F in repair 9 Watt LED Bulb, in white colour with maximum Lumen output (LM) 650 K, all as specified and directed by Engr-in-charge.

Supply and fix in replacement of 12 Watt LED Bulb, in warm white colour (Normal/thread type) with maximum Lumen output (LM) 650 K, all as specified and directedby Engr-in-charge.

Supply and fix in replacement of 0.5 Watt LED Bulb, in Red/Green colour (thread type) with maximum Lumen output (LM) 650 K, all as specified and directed by Engr-in-charge.

Materials and Labour in repair for multistranded copper cable of size 2.5 sqmm x 3 core PVC insulated unsheathed FRLS cable, complete all as specified and as directed by Engr-in-charge.

Materials and Labour in repair for multistranded copper cable of size 1.5 sqmm x 3 core PVC insulated unsheathed FRLS cable, complete all as specified and as directed by Engr-in-charge.

S&F in replacement for white cover plate with frame, 1/2 module all as specified and directed by Engr-in-charge.

S&F in replacement for white cover plate with frame, 3 module all as specified and directed by Engr-in-charge.

S&F in replacement for white cover plate with frame, 6 module all as specified and directed by Engr-in-charge.

S&F in replacement for white cover plate with frame, 8 module all as specified and directed by Engr-in-charge.

S&F in replacement for white cover plate with frame, 12 module all as specified and directed by Engr-in-charge.

S&F in replacement for white cover plate with frame, 16 module all as specified and directed.

Supply and fix in repair surface mount PVC modular boxes suitable for fixing of modular switch and sockets, ISI marked 2 Module complete with suitable size of screws and PVC rawl plugs complete all as specified and directed by Engr-in-charge.

All as per item No. 72 above but of 3 Module

All as per item No. 72 above but of 6 Module

All as per item No. 72 above but of 8 Module

All as per item No. 72 above but of 12 Module

All as per item No. 72 above but of 16 Module

Supply and fixing in repair Decorative wall light, gold finish fixture with white glass diffuser suitable for 7.5 W LED filament kamp E27 base complete with 01 No. 7.5 W LED filament lamp warm white.

A K JAIN AND SONS (BID ID -3385386)

M/S Builders Indias (BID ID -3387323)

SWASTIK TRADERS (BID ID -3387423)

Ish Engineers and Contractors (BID ID -3382867)

M/S Chib Engineers (BID ID -3387459)

PAWAN KUMAR GOVT. CONTRACTORS (BID ID -3387570)