Terrace Covering with MS Structure and GI sheet roofing of HWCC

Amount

Earthing

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

DISTRIBUTION BOARDS Distribution Boards and accessories Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a)Single Pole

b) Triple pole and neutral

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.

a) For 6 way, Double door TPN MCBDB

LT Cables

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Cable Trays

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 75 mm width & 50 mm height complete with necessary coupler plates & hardware in approved manner.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates,rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

POINT WIRING, SUB MAINS & ACCESSORIES Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

LIGHTING FIXTURES & ACCESSORIES

Supply ,Installation,Testing & Commisioning of weather-proof type 4 feet Capsule LED lighting fixture 36 to 40 Watt suitable for wall/ ceiling mounted application with following features -Surface/Ceiling/ Hanging mounted with all necessary accessories required. -Polycarbonate housing with high transmittance UV stablised diffuser. -CRI>80, THD<10% -Uniform Glare,non yellowing -In built electronic LED driver -Operatable voltage -140-270 V, 50 Hz, PF>0.9 -Antiglare diffuser -System efficacy greter than or equal to 110 lm/watt. -Average life L70B50: 50000 hours. -Inbuilt surge protection of 2.5 kV. -Colour Temperature - 5700K. -Operating temperature = (-10 °C to +45 °C) -ROHS compliant.

AUTOMATIC SMOKE DETECTION & FIRE ALARM SYSTEM

Supplying, installing, testing & commissioning of UL listed analogue addressable false ceiling/ flush on roof slab mounted Multi-Sensor Photoelectric Smoke Detector 0.5-1-2-3-4%/Ft & heat smoke at 570 C fixed element, 24V DC 300μA quiescent & 6.5 mA operated, status LEDs, Rotary switch/DIP switch addressing including with mounting base, wiring back box, all cabling, glands & terminations, complete. Refer Technical Specifications

Supplying, installing, testing & commissioning of Analogue Addressable UL listed Manual Pull Station/ Break Glass Unit, loop powered, 22V DC operating current, 600μA quiescent current with facility to programme the device from 01-159 with the help of dip/ rotary switches, complete with IP 24 housing with gland, Status LED for polling / fire condition etc.as required,Rotary switch/DIP switch hardware addressing installed in recess/ wall/ column including all cabling & terminations & glands Refer Technical Specifications

Supplying, installing, testing & commissioning of UL listed loop powered bidirectional Fault Isolator Module, 24 V DC, 400 μA quiescent & 17 mA in fire conditions, installation on addressable loop after every 15-20 detectors/ devices for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement complete with wiring back box with cable glands, base etc. Refer Technical Specifications

Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Monitor Module 20.5 V DC, 700 mA operated & 600 μA quiescent, rotary/ dip switch address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box. Refer Technical Specifications

Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Control Module 20.5 V DC min , 700 mA operated & 600 μA quiescent, rotary/ dip switch hardware address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box. Refer Technical Specifications

Supplying, Installing, testing & commissioning of addressable, UL listed, Output Relay Module for AHU/ damper/ switchgear operation, loop powered, class A wired, low quiescent current,Rotary/ DIP decimal address setting switch, 24V DC (15-32V), suitable for surface / recess installation, housing & wiring box, In/Out cable glands for switching on/ off electrical equipments including wiring up to fan starter. Refer Technical Specifications

Supply, Installation, Testing, Configuring in Software, Commissioning of power supply unit from 230 V UPS to 24 V DC, 6A power supply for notification for Analogue Addressable System. Refer Technical Specifications

Supplying & installing of 2 pair Loop Data Cable 300/500V, stranded annealed tinned copper, 7/0.53mm, 1.5 Sqmm, PVC insulation type C of IS 5831, Mylar backed aluminum screened with 25% overlap & 100% screen Inner extruded ST-2 sheath, single armoured, PVC St-2 extruded outer sheath with FRLS, to BS 5308. Refer Technical Specifications

Supplying, Configuring in Software of 2 core, 1.5 Sqmm Control Cable, 0.433 kV, 1.1kV for Modules to Devices. Refer Technical Specifications

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 15 mm height complete with necessary hardware in approved manner.

Supplying and fixing of 25 mm dia. of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Linear Temperature Detection System

Supplying, installing, testing & commissioning of 2 zone analog linear heat sensor cable 68 deg. Refer Technical Specifications

Supplying, installing, testing & commissioning of Analogue Linear Heat Sensor Cable Modulator for analog linear heat sensor 68 deg with zone length not exceeding 200 meter with EOL. Refer Technical Specifications

Fire Fighter Telephone System

Supply, installation, testing & commissioning of UL Listed Fire Fighter's Telephone Jack for two way communication between Remote Fire Fighter & Command Center. Refer Technical Specifications

Supplying, installing, testing & commissioning of Telephone Cable. Refer Technical Specifications

FIRE EXTINGUISHER

Supplying & installing of D.C.P type Fire extinguisher 6 kg capacity (21B), 35 bar Test / 15 Bar working, 6 M throw, 20 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 4308, MS sheet deep drawn steel cylinder, sqeeze grip brass control valve, AL syphon tube, Non metallic discharge nozzle, 450 mm long PVC braided hose, pressure gauge, hose holder, conforming to IS 15683 / IS 2190:2010, portable at appointed location on wall/ column mounted brackets, clamps & other accessories. Refer Technical Specifications

Supplying & erecting of CO2 type extinguisher, 4.5 kg capacity (21B), 250 Bar Test / 60 Bar storage, 2M min throw, 8 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 15222, Seamless steel tube cylinder to IS 7285, sqeeze grip brass control valve to IS 3224, AL internal discharge tube, Poly Ethylene discharge nozzle, 450 mm long PVC braided hose, safety release, seal temper indicator, pressure gauge, hose holder & conforming to IS 15683 /IS 2190:2010. portable at appointed location on wall/ column mounted brackets, clamps & other accessories. Refer Technical Specifications

Cable Trays for Electrical Services

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 15 mm height complete with necessary hardware in approved manner.

Supply ,Installation,Testing & Commisioning of Hot deeped Galvanised cover suitable for perforated type Cable tray manufactured from 18 swg (1.2mm thick) GI sheet of 300 mm width & 15 mm height complete with necessary hardware in approved manner.

AUTOMATIC SPRINKLER SYSTEM Supplying & erecting C class, (Heavy Duty), ERW, IS 1239, Galvanized Iron pipes of following sizes, ISI mark of specified diameter with screwed sockets, Joints & necessary G.I. fittings such as sockets, check nuts, elbows, bends, tees, reducers, enlarger, plugs, etc. including electric resistance welding (ERW), fixing with clamps & all connected works such as excavation, drilling holes in wall, slabs, backfilling & making good the damages. Refer Technical Specifications

Supplying & erecting C class, (Heavy Duty), ERW, IS 1239, Galvanized Iron pipes, threaded fittings of following sizes, ISI mark of specified diameter with screwed sockets, Joints & necessary G.I. fittings such as sockets, check nuts, elbows, bends, tees, reducers, enlarger, plugs, etc. including electric resistance welding (ERW), fixing with clamps & all connected works such as excavation, drilling holes in wall, slabs, backfilling & making good the damages. Refer Technical Specifications

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN16 class of 150 mm dia with stem extension arrangement., with CI260/SGI IS 1865-400/15 Body & seat, EPDM/ Nitrile Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155, including provison & welding of matching flange to BS10Table E, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2. Refer Technical Specifications

100 mm Dia

65 mm Dia

Supplying, installing, testing & commisssioning of insertion type vane Flow Switch UL listed pipe insertion type suitable for 30 bar pressure for velocity up to 6 M/Sec, trigger flow of 15 LPM with IP 55 switch box having 2 SPDT contacts rated at 1.5 A, 24 V DC. complete with all accessories Refer Technical Specifications

Supply, Erection, Testing, Commissioning of 15mm (1/2") dia NBCM Body chrome finished quartzoid bulb UL listed Pendant Sprinkler having 57 deg celcius fixed temperature rating with deflector disc complete with rosette plate. Refer Technical Specifications

Supplying, installing, testing and commissioning of drain and test arrangement with 50 mm dia GM drain valve screwed ISI class-I between sprinkler header & drainage line with existing 50 mm dia GI pipe including cutting, threading, welding etc, with union test valve and sight glass connection, complete as required.