REPAIR TO WALL FLOOR SANITARY FITTINGS ETC IN MES COLONY MUTAGA CAMP AT ATS BELAGAVI

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and metal frame work complete all as specified and directed.

Taking down cement plaster of any thickness from stone/brick/concrete/RCC wall/ceiling surfaces including raking out joint, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling of wall/ floor/dado, hearth or wall tiling or terrazo cement concrete tiling including cement mortar bedding of any thickness (but not backing) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings of any grade of mix not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of cement concrete (un-reinforced) of any description of any grade of mix and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling asbestos cement / steel (Corrugated, semi corrugated, etc) sheets in roof coverings including ridges all as specified and directed.

Dismantling RCC posts or struts (steel , RCC) any section including taking down embedded portion from concrete, brick work, masonary etc. and making good disturbed ground all as specified & directed

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sq. m each, making good disturbed surfce to match existing all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) including making good using plaster and PCC as required all as specified and directed.

Taking down Chowkhats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames) including making good using plaster and PCC as required all as specified and directed.

Dismantling water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs all as specified and directed.

Dismantling water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs all as specified and directed.

M & L cleaning and removing of all scale and dirt etc., cleaning mouth of circulating pipes, using 70gm of bleaching powder per tank from water storage tank of capacity from 500 litres but not exc. 1000 litres each, after taking down by disconnecting of outlet pipe and re-connecting in the same position after cleaning and marked on tank with white synthetic enamel paint as " tank cleaned on ________(date)" using stencil complete all as specified and directed

Providing and laying water proofing treatment over RCC roof surface as per following specification including taking down old treatment complete all as specified and directed. :- (i) preparation of existing roof surface and plastering 15mm thick cement mortar 1:4 finished even & smooth. (ii) applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per Sqm (in two coats) without leaving the pores/voids (iii) applying primer @ 0.30 liter per Sqm in two coats over concrete / plastered surface (iv) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) forced application with the fire torch

S & F Gl frame work of size 605X605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete in all respect as specified and directed.

Providing & laying hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete in all respect as specified and directed.

S & F calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid exposed metal frame complete in all respect as specified and directed.

M & L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary form work and exposed surface of concrete shall be finished even and smooth without using extra cement all as specified and directed.

M & L hardcore with broken stone or boulders gauge not exceeding 63 mm size deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface all as specified and directed

M & L Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in 75mm thick sub base to floor complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantalling of existing paver block laid dry complete in all respect as specified and directed.

Supply only liquid water proofing compound all as specified and directed

M & L Pre-cast cement concrete 1:3:6 type C1 using 20 mm graded stone agrregate as in solid block masonary exc 10cm width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:6 including demolition of existing masonary work complete all as specified & directed

M & L rendering 15 mm thick cement mortar 1:6 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick cement mortar 1:4 over brick work or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 10 mm thick cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in 25mm thick levelling course/sub base under floor all as specified and directed.

M & L Coloured glazed ceramic tiles of size exceeding 0.09 sqm but not exceeding 0.18 sqm in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over and including cement screed bed 15 mm thick cement mortar screed bed in 1:6 complete all as specified and directed.

M & L Vitrified Ceramic tiles, light shade, double charged, 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slury over & including cement screed bed 15 mm thick cement mortar 1:6 complete all as specified and directed.

M & L Vitrified Ceramic tiles, light shade , double charged, 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slury over & including 10mm thick cement mortar backing in 1:4 complete all as specified and directed.

M & L Machine cut cudappah stone slab 20-25mm thick in vertical/horizontal position, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L Rolled mild steel any type/size sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors and door frames; fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165) complete all as specified and directed.

S & F Mild Steel flat as in wind ties for roofing including securing bolts confirming to Fe -290 Gde E-165 all as specified and directed.

S & F Prepainted galvalume aluminium zinc coating GI based trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

S & F 1.00mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , size design as per site complete all as specified and directed.

S & F Galvanised Iron wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste etc complete all as specified & directed

S & F Factory made single extruded WPC (Wood Polymer Composite) frame size 45X85mm, solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed

All as per item no 40 herein before but size of frame 65X125mm

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified & directed

Supply and fixed 16-18mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete in all respect as specified & directed.

S & F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars (fancy design as directed), plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 through hold fast/fastners etc. including necessary PCC in hold fasts complete all as specified and directed.

Supply and fix FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER 30mm thick to chowkats, consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete all as specified & directed

Supply and fix Aluminum frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleats for fixing each other etc. complete all as specified & directed.

S & F Aluminium three track (two for glazed and one for wire mesh) sliding windows shutters, powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick dark black tint plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20798 (b) Main Frame top & sides section : Jindal section No 20678 (c) Sliding shutter section (handle ) : Jindal section No 20707 (d) Sliding shutter section for top & bottom : Jindal section No 20842 (e) Sliding shutter section for interlock : Jindal section No 21091

S & F Aluminium window and ventilator shutters/ louvered section powder coated (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections of not less than 60mm width & 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, peg stays 150mm long (1 no. per window), hinges 100mm long (2/3 nos.) suitable handle (1 no.) complete all as specified & directed.

Supply and fix powder coated aluminium grill (minimum thickness of powder coating 50 micron) aluminium section of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium section of standard section around the opening complete all as as specified and directed.

S & F Providing and fixing factory made uPVC white colour Sliding window Three track, area of each window not exceeded 2 Sqm, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (90mm x 42.5mm), sliding sash (54mm x 32mm). Sliding mesh Sash (54mm x 32mm) Sliding interlock (One vertical length in each shutters) (30mm x 35.50mm), Glazing bead (22mm x 14.5mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (18mm x 10mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: (i) uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made (ii) Glass or wiremesh shall be paid separately

Supply and fix 4.8mm thick dark black tinted sheet glass, ordinary quality, in squares, pane in UPVC/Al window sections complete in all respect as specified and directed.

Material and labour for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint duly filled the voids with enamel based putty including one coat of red oxide primer complete in all respect as specified & directed.

S & F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in all respect as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section, 200 mm long all as specified and directed.

S & F Aluminium handles, cast type, anodised 150 mm long all as specified and directed.

S & F Butt hinges 100 mm size, medium weight, stainless steel all as specified and directed.

S & F Figured glass 4 mm thick, pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane all as specified and directed.

S & F mild steel ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete fixed to MS frame or wooden frame all as specified and directed.

S & F floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring overall length of cover plate140 mm, fixed in floor all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws in wooden or UPVC window/doors etc. complete all as specified

M & L Preparation of new plastered wall surfaces and applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer complete as mentioned in SSR and as directed .

M & L preparation of new un-decorated wall surface and applying two coats of oil bound distemper over a coat of priming paint on 3mm thick layer of wall care putty finished to smooth surfaces all as specified and directed

M & L Complete removal of existing treatment of old decorated wall surface and applying two coats of oil bound distemper over a coat of priming paint on 3mm thick layer of wall care putty finished to smooth surfaces all as specified and directed

M & L for preparation of old decorated wall surface and applying two coats of oil bound distemper complete in all respect as specified and directed

M & L Preparation of new plastered ceiling surfaces and applying two coats of white wash all as specified and directed

M & L Preparation of old plastered ceiling surfaces and applying two coats of white wash all as specified and directed

Supply and fix rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) double layered, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) double layered, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia complete all as specified and directed.

Supply and fix in repair, cast copper alloy CP finish wall mixer (3 in 1) including telephonic hand shower 15mm bore dia, for mixing hot & cold water screwed down for water pipe/fittings complete in all respect as specified & directed.

Supply and fix in repair fancy angle stop valve, 15mm bore dia chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete in all respect as specified & directed. Make: Jaquar (Cat Part No. APR-101053), Cera (Cat Part No. F1013201 or equivalent Cat Part No. in, Hindware, Parryware

S & F in repair PVC tank cover including fittings for fixing of cover to tank and locking arrangement suitable for 500 to 1000 ltr capacity of PVC water tank all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets, PVC flush down pipe with bend short or long etc complete all as specified and directed.

Supply and fix in repair Towel Rail 600mm long cast copper alloy chromium plated fixed with and including Chromium pated brass screws all as specified and directed.

Supply and fix wall mounted Sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 300mmx300mm with chromium plated bracket guard and railing all as speicfied & directed

S & F in repairs Alumimium Hat pegs, solid body, 125mm to 175 mm in length all as specified and directed.

Supply and fix in repairs of Soap dish, any type, fixed to plugs with brass chromimum plated fixed with brass screws complete all as specified and directed.

S & F in repairs Stainless Steel curtain rails 25mm dia decorative type including end brackets and knobs etc. all as specified & directed

PURVIK CONSTRUCTIONS

M/S. ADARSH ENTERPRISES

RAJENDRA KRISHNA SARAF

SAMARTH ASSOCIATES

shree bhavani constructions

M/S ADITYA CONSTRUCTIONS

VISHAL M ENGINEERS

Raghu M Contractor