Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3,180
Closing Date
31 Aug 2026, 12:00 pm4d left
Assistant Engineer IV
LDSC Lucknow
Wooden Polishing of 1st floor meeting hall at Dr. Ram Manohar Lohiya Parikalp Bhawan Telibagh Lucknow.(Lot No.54)
2026_UPIDC_1178971_54
02/AEIV/2026-27
Open Tender
Civil Works
Item Rate
30 days
Parikalp bhawan telibagh lko
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹3,180
24 Aug 2026
24 Aug 2026
31 Aug 2026
24 Aug 2026
31 Aug 2026
24 Aug 2026
24 Aug 2026 - 31 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: | |||||
| 1.1 | The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. | - | - | - | - |
| 1.2 | Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. | - | - | - | - |
| 1.3 | On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then
surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this
surface is further allowed to dry for 12 hrs. | - | - | - | - |
| 1.4 | On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | 66.32 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.31 MB
lot-54.pdf
Tender Documents • 1.41 MB
BOQ_2216724.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].