PERIODICAL SERVICES FOR DMDE AREAS BUILDINGS AND CE RND SECUNDERABAD UNDER AGE B/R - II SECUNDERABAD

Amount

M&L for preparation of old plastered surfaces of ceilings and applying one coat white wash on ceilings complete all as directed.

M&L for preparation of old plastered surfaces of walls/Ceiling and applying one coat oil bound distemper complete all as directed.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions over a coat of primer over one coats of putty 1.5mm thick layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of premium emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 including demolition of existing damaged brick work and removing debris outside MOD land complete all as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished even & smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 3 mm thick wall care putty (of Birla make) over a coat of alkali resistant primer, complete all as directed by Engineer in charge

M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- Apex Ultima of Asian paints or Equivalent

M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

M&L for preparation of old painted steel/iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and one coat of synthetic enamel paint.

M&L for preparation of old painted wooden surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

Taking up or down steel tubing and connections and supply and fixing 15mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 20mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 25mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

S&F in repairs 15 mm dia long nose bib taps, cast copper alloy chromium plated with capstan head , screwed down, screwed for iron pipe complete all as directed. ISI marked

S&F in repairs 15 mm dia Swag neck piller/wall mounted taps, cast copper alloy chromium plated with capstan head , screwed down, screwed for iron/CPVC pipe complete all as directed. ISI marked

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capstan head , screwed down, screwed for iron pipe complete all as directed.ISI marked.

S&F in repairs angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.ISI marked

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed. ISI marked

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia CI Brass waste coupling incl brackets complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. Note :- Demolition of tiles/concrete requested and concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed. ISI marked

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed. ISI marked

S&F in repairs plastic water closet seat, white/colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devise complete all as directed. ISI marked.

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed

S&F in repair electronic urinal of size 425x 410 x 645mm neutral integrated AC/DC with power source complete all as directed

S&F in repairs Urinal sensor, solonet Valve, Battery box along with batteries complete all as directed.

S&F in repairs WHB sensor, solonet Valve, Battery box along with batteries complete all as directed.

S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified.

S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked

S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia incl stainless steel arm, ISI marked incl fixing to steel pipe or union.ISI marked

S&F in repairs stainless steel grating of 100 mm dia CP grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup board shutter, shelves and similar items fixed to timber frame work complete all as specified and directed.

S&F in repairs chromium plated brass soap dish (Double Soap type) with screws complete.ISI marked

S&F in repairs 40mm dia brass polished cup board knobs fixed with nuts and screws all as directed. ISI marked

S&F in repair PVC bathroom cabinet with looking mirror of size 500 mm x 400 mm x 140 mm complete all as directed.

S&F in repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed.

S&F in repair telephone hand shower complete all as directed.

S&F in repairs floor door stopper of S/S body with double legs and 150 mm long fixed with screws to shutters complete all as specified and directed. ISI marked

S&F in repairs floor door stopper of S/S body with double legs and 100 mm long fixed with screws to shutters complete all as specified and directed. ISI marked

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as directed.

S&F in repairs Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete all as directed.Make: Godrej/Link/Sheel

S&F in repairs stainless steel peg set of 06 hooks complete all as directed ISI marked

M&L vitrified tiles of any shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed.

Ditto as item no 50 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of old skirting tiling and removing rubbish off the premises all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair sink made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs stain less steel plate rack made of stainless steel 1mm thick size 900mmx 600mm x150 mm fixed in position complete all as specified.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over a screed bed 20 mm thick in CM 1:6 incl dismantling of old floor tiling and removing rubbish off the premises all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling of old dado/skirting tiling and removing rubbish off the premises all as specified and directed.

M&L 18 mm thick granite work (table rubbedand polished) in steps, jambs, pillars, window cills, cooking platforms, landings and like incl 10 mm thick screed bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges,including demolition of old granite of any thickness complete, all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each and removing away from site complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face & 2mm plain colour PVC sheet on back face with particle board core all as per specification and directed.

S&F 35 mm thick Factory made pressed moulded panelled door shutter of single or multi panel textured masonite moulded door fabricated using well seasoned and chemically treated solid second class hard wood styles, rails and panels made out of tubular core bonded with PF synthetic resin conforming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's color, texture design as approved by GE all as specified and as directed.

S&F 35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F in stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

M&L running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame or second class hard wood beading in suitable size for wooden frames on squares not exceeding 0.5 Sqm in each pane including hacking out existing damaged glass work complete all as directed.

M&L for Preparing Old/newly plastered surfaces and applying Co-polymer emulsion based paint for interior application (Royale Play or equivalent). Including priming over a coat of Two coat of wall putty to make surfaces smooth.

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; handrails; railings; framework of valley gutters and similar work con- forming to Fe.290.Gde-E-165de E-165 incl dismantling iron frame any desription.

S&F in repairs glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated 150mm length brackets on both sides fixed in position complete all as specified and directed.

S&F in repairs carner glass shelf of size 400x200 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on both sides fixed in position complete all as specified and directed.

NOTE FOR CONTRACTOR APPLICABLE TO ALL SCHEDULED ITEMS NO 01 TO ITEM NO 76:- (a) Contractor's supervisor shall collect Bldg No for repairs from AGE B/R II Secundrabad office for daily basis at 9.00 AM and feedback should be provided same working day at 05.00 PM. After completion of work User/Occupant signature should be submitted to JE(Civil) on slip without fail. (b). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (c) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3434316)

MOHAMMED GHOUSE (BID ID -3434841)

SUN LIGHT HOUSE (BID ID -3434240)

omsai thermax engineers (BID ID -3433959)

SRI SAI ENTERPRISES (BID ID -3432027)

sri vishnu enterprises (BID ID -3434577)

Anjana corporation (BID ID -3434210)

hari enterprises (BID ID -3434532)