Chidambaram Municipality Providing Mini Power Pump at East Sannathi Street in Chidambaram Municipality.

Drilling of borewells of size 6'' to 8'' dia in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the TWAD Board officers.

Reaming from 140/150mm dia pilot bore to 300mm dia above as directed by the departmental officers up to 60m depth ending below GL.

Supply and delivery of un plasticised for 160mm dia plain PVC pipes with socket ends and centering guides for every 15mtr length of pipes as per is 12818/92 and as amended from time to suit deep bore well up to 80m depth (CS) for delivery at site etc.,

Supply and delivery of un plasticised for 160mm dia plain PVC slot casing pipes with socket ends and centering guides for every 15mtr length of pipes as per is 12818/92 and as amended from time to suit deep bore well up to 80m depth (CS) for delivery at etc.,

Labour for inserting 140mm dia PVC pipe with slots and with out slotting in the `drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size on.

Supply delivery and fixing of DN 160mm Pvc end cap suitable for the above pipes with ISI marking inclusive at all take etc., complete

Earth work excavation and depositing on bank with initial lead of 10m and lift of 2.00m in hard stiff clay, stiff back cotton soil, hard red earth, shales.pedestal for HDPE Tank, SOAK PITpedestal for KIOSK

Supply delivery and filling of River Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand at Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification _ 1 Cum.

Plain Cement concrete 1:4:8 (one cement four sand eight aggregate) using 40mm HBS for foundation including the cost of mixing concrete.Pedestal for HDPE Tank, SOAK PIT, Pedestal for kiosk

Brick work in CM 1.5 (one cement and five sand) using country bricks of size 8 3/4 " x 4 1/4 " x 2 " including curing etc., complete For foundation parapet, pedestal and embedment of HDPE tank, drain sides and soak pit sides pedestal of Kiosk

Centering for sides and soffits to RCC works for columns with proper support including all materials and labour charges etc., completed as per the standard specification.

Supplying and fabricating of Steel by using RTS Rod for RCC works including all materials cost and labour charges and conveyance etc., complete.

RCC 1: 1.5 : 3 mix using 20mm ISS size HBG metal including cost and conveyance of materials and labour charges as per standard specification etc., complete.

Plastering in CM 1:5 (one cement and five sand) 12mm thick over brick work including finishing curing etc.,For foundation parapet, pedestal and embedment of HDPE tank, drain sides and soak pit sides pedestal of Kiosk

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and delivery and fixing HDPE Tank (as per BIS specification with ISI mark) including loading and unloading transportation and fixing etc., (1000 litres capacity)

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supply and delivery of Ms kiosk of size 0.75 x 0.45 x 0.75 for fixing of meter board, switchboard.

Supply delivery and errection of pumpset including EB service connection

Supply and delivery of single phase submersible pump set with motor as per ISI, 20 lpm x 90 m head including panel board consist of following 1. Relay with ISI mark.2 Contact Unit ISI mark.

Supply and delivery of following GI pipes and specials conforming to IS 554/86

32mm GI pipe for service pipe and pump set erection.

20mm GI pipe for encasing cable

32mm GM gate valve for inlet and scour

32mm GI elbow

32mm GI union

32mm GI coupling

M.S. clamp set

32 mm Ball Valve

32mm GI Nipple

Supply and delivery of wiring Materials for EB service connection for Pump set

1.5mm flat copper submersible cable

4 SQ,mm copper wire for service line

GI No.8 wire and No.6 Wire

32 amps fuse carrier

2’ x 1 ‘ Meter board

Aerial board

1HP Starter Panel board

50mm GI Pipe for Service in stay post

Add GST 18%