MLA CD 2025 26 Construction of Kalaiyarangam(Drama Stage) 4th Ward in Sithayankottai Town Panchayat

Earthwork excavation for foundation in all soils and sub soils except hard rock requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth and depositing the surplusr earth within the compound in places shown by the departmental officers with initial lead of 10m & initial lift of 2m,clearing and levelling the site etc., complete as per standard specification SS20B(TNBP No.17,23,24).

Supplying and filling in foudation and basement with Well Gravel in layers of not more than 15cm thick including well rammed watered and consolidated including cost and conveyance of Gravel to work site from approved sources and including labour charges for all lead, Gravel lift, filling, laying, levelling, watering and compacting including all other incidental charges etc., complete complying with standard specifications(TNBP No.24&25).

Plain Cement Concrete 1:4:8 mix Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated, including cost and conveyance of materials to work site and including all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specificationsetc.(TNBP No.28).

Supplying and erecting steel centering including necessary supports suitable for coloum footing,Plinth beam,Square (or) Rectangular Coloum,Slab, Beam and Lintel surfaces for RCC works using M.S.Sheets,angles,silver oak joists, steel adjustable span with adjustable Telescopic Props with suitable support intervals.Cost including Hired material and all Labour Charges etc. complete complying with standard specifcation-For Plinth Beam

For Slab, Beam & Lintel - Lintel

For Coloum and Sunshade

Reinforced Cement concrete 1:1 1/2:3 using machine crushed 20mm gauge ISS HBGS jelly excluding centering strutting and Reinforcement but including cost and conveyance of materials to work site and including all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specificationsetc.( TNBP No:30) - a)Foundation and Basement

b)For Ground Floor

Supplying, fabricating and placing in position of M.S (or) RTS for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and Labour charges in all floors etc.complete complying with standard specifications TNBP No:30

Brick Work in CM 1:5 mix using Second Class Bricks of Size 9 " x 4 3/8" x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications – TNBP No:31- a)Foundation and Basement

b)For Ground Floor

Special Ceiling Plastering with CM 1:3 (One part of cement & three part of Fine aggregates)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying,finishing and curing, etc., complete as per standard specifications – TNBP No:30,56&57

Plastering with CM 1:5 mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying,finishing and curing, etc., complete as per standard specifications – TNBP No:56&57

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the propotion of brick jelly to lime being 32:121/2 by volume and laid over in a single layer and consolidated to the required design and finished thickness , beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wetted by sprinkling lime jaggery water as per standard specification,etc.complete as directed by the departmental officers.TNBP No:44-I

Finishing with top of roof with one course of machine pressed tiles of size 23cmx23cmx2cm of approved quality laid in cement mortar 1:3 -12mm thick mixed with WPC conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc.complete complying with standard specification as directed by the departmental officers.TNBP No:44-I

Finishing the top of flooring with Ceramic Tiles of size 305x305x6 mm Laid over cement mortar 1:3 bed of 20 mm thick with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification . TNBP No:66-A

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification. (New Iron Surface).TNBP No:66&66-A

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator)(SD.No.24)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter lockingWall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD No.38)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point (SD 40)

Supply and fixing of 4'40 W LED fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. of approved quality including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification (SD 88)

Supply and fixing of 1200 mm (48') AC Ceiling Fan complete with stepped electronic 300 W Regulator with 1 m down rod on existing Clamp of approved quality including cost and conveyance of all materials and labour charges and other incidental charges etc., complete as per standard specification (SD 106)

Supply and run of 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains .(PWD standard data No.SD. 64).

Supply and run of 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (PWD standard data No.SD.69).

Supply and fixing of 8 ways single phase DB No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 6 (PWD SOR -25-26- M1926 / P248)

CHINNAMUTHU (BID ID -1505582)