GE/C-53/2019-20

Amount

M & L for repair of sunken floor treatment as per following steps and directed by Engr-in-charge : - (a) Demolition/dismentling of sanitary fixtures and fittngs and taking out and removing sunken floor fillinga way from bldg complete all as directed by Engr-in-charge (b) M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 mixed with WPC in mortar complete all as directed by Engr-in-charge (c) M&L for applying one coat of hot blown bitumen 85/25 grade @ of 1.20 Kg per Sqm on the plaster surfaces including verticla surfaces and laying APP polymeric water proofing membrane minimum 3mm thick and weighing not less that 3.5 kg per sqm of make ‘Superthemolay’ by STP Ltd or Hyper Plas Polyester manufactured by M/s IWL or Bengal supermat manufactured by M/s Bengal bitumen or SBS water proofing menbrane manufactured by M/s Modern bitumen Pvt Ltd or Torch tar Brand APP membrane of torchtar membranes & Bitumen products pvt Ltd over compatible bitumen primer @ 0.4 kg/sqm by torching application with a propane or butane gas torch with an overlap of 100mm at the sides and 150mm at the ends all as per manufactures instruction (d) Plain cement concrete type D2, 1:4:8 mix (using 40 mm graded brick aggregate) asin filling of sunken floors complete all as directed by Engr-in-charge (e) S&F 45cm long 25mm dia medium grade GI pipe as in spouts including making holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed by Engr-in-charge. Note-01 : - Rates quoted are inclusive of taking down the existing sanitary fittings carefully i.e flushing cistren,flush pipe connection pipe, traps , CI pipes etc and fixing after completion of sunken floor treatment and fixture fittings required shall be paid under supply only. except floor trap required at site ponding test shall be carried out for 24 hrs for any leakage/seepage. Note -02 . CI pipes, WC and EWC,Seat cover etc shall be measured and paid sepratly with relevent items, fixing charge shall be consider under this item only. Area of each sunken floor / slab is appx 2 to 2.5 sqm Note: 03 : Contractor shall have to render a guarantee for 10 year for the effectiveness of treatments & a FDR @ 10% of respective item shall be rendered for 10 year.

Supply only vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests with "P/S" traps compelete all as specified and directed by Engineer-in-Charge.

Supply only Vitreous China wash down water closet pan (pedestal pattern), white with sheet cover with "P/S" traps compelete all as specified and directedcomplete all as specified and directed by Engr-in-Charge.

Supply only 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors compelete all as specified and directed by Engineer-in-Charge.

Supply only 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors compelete all as specified and directed by Engineer-in-Charge.

S&F in repair 110mm diaPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls compelete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls compelete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc incl 2 Nos CI brackets complete all as specified.

Supply only fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S&F 110mm dia PVC (SWR) bends any radius compelete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bends any radius compelete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal compelete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal compelete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal compelete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal compelete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) couplers compelete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) couplers compelete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) reducers compelete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) vent cowl compelete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) vent cowl compelete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 compelete all as specified and directed by Engineer-in-Charge.

All as per item No 24 but expect brick

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. compelete all as specified and directed by Engineer-in-Charge.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair compelete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in CM1:6 on fair faces of brick work finished even and smooth without using extra cement complete all as specified.

S & F in repair 15 mm chromium plated fancy type wash basin mixer for mixing hot and cold water scrrwed down for iron pipe or brass ferrule compelete all as specified and directed by Engineer-in-Charge. ( Make : Jaquar/Marc/Kohler).

S&F in repair health facuet with 1metre long flexible pipe along with nessesary fixing arrengment complete all as specified & directed by Engineer-in-Charge.

S&F in repair looking mirror 600x450mm bevelled edge 5.5mm thick high quality 4mm glass,dual hanging option of Prayag Cat No 553 and fixed to wooden plug with CP brass screws and cup washers complete all as specified and directed by Engr in Charge.

S&F PVC coated aluminium drapery curtain rod 20mm dia coloured with pair of suitable brackets and fennals as approved by GE including taking down old pelmet boxes with curtain rods, complete all as specified and directed. Make vista cat part no-BG-006 florena-III or equivalent.

M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer compelete all as specified and directed by Engineer-in-Charge. .

M&L preparation of new/old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer compelete all as specified and directed by Engineer-in-Charge. .

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles compelete all as specified and directed by Engineer-in-Charge.

M & L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 10mm thick backing coat in CM 1:4 etc complete all as specified .

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

Material and labour for coloured glazed ceramic tiles of size as directed and 7 mm thick in vertical surface set and jointed in neat cement slurry and pointing in coloured cement laid/fixed over 10 mm thick cement mortar (1:4) back coat complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan (including provision of lime concrete bedding) of size 580x440mm white with intergral footrest including providing 100mm bore CI 'P' or 'S' trap complete all as specified (excluding flushing cistern and flush).complete all as specified and directed.

Supply only PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc incl 2 Nos CI brackets complete all as specified.

M & L in repairs PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.

S & F in repairs for fancy type wash hand basin vitreous china white glazed flat back, size 550 x 400 mm, including brackets and cutting for and pinning in ends of brackets including provision of bottle trap and coupling etc complete all as specified and directed.

S&F PVC waste pipe in repair of standard pattern, 32mm bore socketed end 600mm long for wash basin complete all as specified.

S&F 32 mm waste fittings in repair of brass chromium plated for wash hand basin with long screwed shank and flynut flange complete all as specified.

S&F solid PVC door frame of size 50 x 47 mm made out of 5mm thick plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face and 2 mm plain color PVC sheet on back face as per specification and drawing complete all as specified.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane including hacking out old panes compelete all as specified and directed by Engineer-in-Charge.

S & F rotational moulded polyethylene water storage tanks tripple layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 ltrs capacity.including float valve of PTMT 20mm size complete including dismantling old water tanks all as specified.

M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc including taking down old one complete all as specified .

M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc including taking down old one complete all as specified.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) compelete all as specified and directed by Engineer-in-Charge.

S&Fin repair 15 mm dia Bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrupe and fixed complete all as specified

S & F in repair of ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S & F in repair galvanised mild steel wire cloth, nominal dia of wire 040mm & average width of aperture 1.40mm, and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F 35 mm thick 2nd class hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) including one shop coat of pink primer complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides / feather edges) of veenered particle board medium density wood particle board with commercial face veeners complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each compelete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame n exc 1.5 sqm each compelete all as specified and directed by Engineer-in-Charge.

S& F steel window including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60mm,double revated with side hung shutters both glazed and gauged incl box type hinges,steel handles and peg stay,tower bolts complete with glaze/gauge bars devotailed or welded incl one shop coat of red oxide primer (Wire gauge and glass panes shall be measured seperately) incl M & L for providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge

S & F 150 mm long allumium anodised barrel tower bolts of extruded section compelete all as specified and directed by Engineer-in-Charge.

S & F 150mm Extruded aluminium alloy handles, fabricated type,anodised handles compelete all as specified and directed by Engineer-in-Charge.

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix Aluminium alloy, anodised,sliding door bolt 300 mm with hasp,staple (bolt type) and fixingclips of sheet, cast or extrudedsections and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F in repairs towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

S & F in repair 125mm dia MS chromium plated grating with holes fixed in cement mortar (1:3) complete all as specified.

S & F Butt hinges, medium weight, cold rolled mild steel,100mm size complete all as specified .

Material and labour for 10-12 mm thick perforated ceiling board of approved make as approved by GE, fixed with and including galvanized iron powder coated inverted ‘tees’ or ‘L’ sections (concealed GI frame work) suspended from ceiling with provision of galvanized iron wire 4mm dia and self tapping screws including butterfly clips, hold down clips for fixing the board to frame, including demolition of old ceiling board complete all as per manufacturer’s instructions a) Size of Main Tee- 38x38x1.5mm b) Size of Cross Tee- 29x24.7x0.8mm c) Size of wall angle- 25x25x1.5mm d) Size of grid-600mm x600mm

Material and labour for 4 mm thick E-board ceiling of approved make as approved by GE, fixed with and including galvanized iron powder coated inverted ‘tees’ or ‘L’ sections (concealed GI frame work) suspended from ceiling with provision of galvanized iron wire 4mm dia and self tapping screws including butterfly clips, hold down clips for fixing the board to frame, including demolition of old ceiling board complete all as per manufacturer’s instructions a) Size of Main Tee- 38x38x1.5mm b) Size of Cross Tee- 29x24.7x0.8mm c) Size of wall angle- 25x25x1.5mm d) Size of grid-600mm x600mm Make : Lafarge, Armstrong, Ramco Industries Ltd.

M&L for roof treatment as per the description below :- a) preparation of horizontal/vertical surfaces of brick/concrete /existing roof treatment roof surfaces also removing the , cleaning and washing down and make the surfaces free from dust and other conteminate Supply and fix APP polymeric water proofing membrane minimum 3mm thick and weighing not less that 3.5 kg per sqm of make ‘Superthemolay’ by STP Ltd or Hyper Plas Polyester manufactured by M/s IWL or Bengal supermat manufactured by M/s Bengal bitumen or SBS water proofing menbrane manufactured by M/s Modern bitumen Pvt Ltd or Torch tar Brand APP membrane of torchtar membranes & Bitumen products pvt Ltd over compatible bitumen primer @ 0.4 kg/sqm by torching application with a propane or butane gas torch with an overlap of 100mm at the sides and 150mm at the ends all as per manufactures instruction incl preparation of surface and applying a consistent coat of bituminous aluminum paint over APP surface complete all as specified and directed including taking down existing water proofing treatment and disconnecting water storage tank including connections for carrying water proofing treatment & placing the water tanks & making connections after carrying out water proofing treatment complete all specified and directed by Engineer-in-Charge Note : (The water proofing treatment shall be got carried out by manufacturer or their authorized applicators only) Note: 1. Contractor shall have to be render a guarantee for 10 year the effectiveness of treatments & a FDR @ 10% of respective item shall be rendered for 10 year.

Dismantling loose concrete cover of RCC columns,beams,slabs chajjas and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry including derusting of steel reinforcement to providing fabric mild steel wire mesh 75X75X3 mm dia as reinforcement to concrete surfaces, applying adhesive admixture over steel mesh and providing minimium 40 mm thick (average thickness) guiniting mix using 1 part of ordinary portland cement 53 grade and 2 part of ghaggar sand mixed with the pressure of 2 to 2.5 kg per sqm by guinting machine including necessary plaster in CM 1:4, 10mm thick to match existing surface and surfaces finised even and fair.all as specificed

S&F in repair 15mm angle cock standard of PTMT any colour high pressure screwed for iron pipe and fixed . (Minimum weight 15mm-90gms) complete all as specified.

S & F in repair CP angle valve fency type 15 mm bore fixed to steel tubing complete all as specified and directed.

M&L 75 mm PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc compelete all as specified and directed by Engineer-in-Charge.

M & L Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M35 grade complete all as specified

M & L sand filling under floors or in foundations including watering and consolidation compelete all as specified and directed by Engineer-in-Charge. .

M&L 17 - 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough all as specified and directed.

M&L for 19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including exposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails complete all as specified and directed.

M&L for 19 mm thickPrelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including exposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails complete all as specified and directed.

S&F of small fittings such as brackets of any type latch and hinge block, shaped door window stops and the like in second class hard wood article not exc 200 cucm each complete all as specified and directed.

Supply only 50 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

M&L 40 mm thick cement concrete flooring 1:2:4 type B-1 using 20mm graded stone aggregate finshing even and smooth without using extra cemet complete all as specified.

M&L 75mm thick cement concrete 1:3:6 type B1 using 20mm graded stone aggregate as in plinth. Complete all as specified.

Supply only intergal water proofing compound compelete all as specified and directed by Engineer-in-Charge.

S & F steel work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) including taking down exiting unservisable/rusted truss/post/pruline compelete all as specified and directed by Engineer-in-Charge.

S&F in repair Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws compelete includijng taking down all as specified and directed by Engineer-in-Charge.

Note :- Total amount of Sch of credit is Rs 134775.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

SHREE RAM BUILD TECH

imran construction company

a.k constructions