Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC BeingL1 | |
| 2 | L2₹39.4 L+₹1.7 L (4.37%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹41.0 L+₹3.2 L (8.56%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹41.5 L+₹3.7 L (9.84%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L4 | Rejected-Finance BEING NOT L1 |
Tender Value
₹42.4 L
EMD Value
₹84,800
Closing Date
28 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
PROVISION OF GUARD POST AND TOILET NEAR DHARNA RIVER AT DEOLALI UNDER GE AF OJHAR
2022_MES_524150_2
8871/E8
Open Tender
Civil Works
Item Rate
240 days
DEOLALI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹84,800
Yes
26 Aug 2022
29 Jun 2022
30 Jul 2022
30 Jun 2022
28 Jul 2022
6 Jul 2022
Amount
Surface dressing n exc 15cm deep and getting out soft/loose soil, complete all as specified
Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in hard and dense soil, complete all as specified and directed.
Excavation over areas in any type of soil, n exc 1.5 m deep and getting out in hard and dense soil
All as per sl.item no-3 but exc 1.50 m deep but n exc 3 m deep
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammedincluding watering
M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete all as specified.
M&L Treating the bottom & sides of excavation at the rate of 5 liters of emulsion per square meter of surface area
M&L Treating the blackfill in contact with foundation at the rate of 7.5 liters of emulsion per square meter of a vertical surface (Area of the substructure in contact with blackfill to be measured)
M&L Treating the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface
M&L Treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area
Brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed
M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as directed.
Reinforcement cement concrete M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.
Reinforcement cement concrete M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.
Reinforcement cement concrete M-25 ( Design mix) as in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.
Reinforcement cement concrete M-25 ( Design mix) as in Chajja complete all as specified and directed
Reinforcement cement concrete M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.
Form work to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( flat ) complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete ( flat ) complete all as specified and directed.
Formework to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping)
Formwork to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide rough finished surfaces of concrete.
Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick.
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.
Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & directed.
Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.
M&L PCC 1:2:4 type B-0 in roof kerbs or mud stops, rounded or chamfered on edges, benching on chajjas , surface finished even and smooth without using extra cement
Spreading & leveling in layers n.exc. 25cm thick, well ramming including watering as required
Hardcore of guage exc63mm,Broken Stones or Boulders deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface
Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified
M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring.
M&L 25 mm thick PCC ,type B-1(20 mm graded aggregate) in flooring cmplete all as specified and directed.
M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement. all as spd and directed
M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.
M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed
Rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.
M&L two coats of distemper oil emulsion over a coat of primer over wall care putty including preparation of new surfaces complete all as specified and directed
Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.
M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed.
Steel Ventilators glazed/gauzed with top hung shutter including hinges steel peg stay complete all as specified and directed by Engineer-in-Charge.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. all as specified.
35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed
M & L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing
S&F solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.
M&LforGalvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.
M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
M&L cutting chases pinning in brick mass and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
S&F 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe .
S&FAngular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.
S&F Bib taps fancy type for 15 mm bore pipe, cast copper alloy fancy type chromium plated of Make - Jaquar , Marc and Johnson complete all as spd and directed.
S & F Vitreous china wash basin(Oval Shape), white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread , all as spd and directed
S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.
S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms)
S&F towel rail Brass CP 600 mm long complete all as specified and directed.
S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including supply and fixing to trap, Incl Supply and fixing of Plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminized hinging devices
S & F health faucet(ABS body) including 0.8mm dia 1.2 mtr long flexible tube and wall hook and MS anodised hanging device Make -Jaquar, Model No-ALD-CHR-593N and equivalent all as directed.
S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets,incl supply and fixing PVC flush pipe 32mm bore of polyethylene of low or high density complete including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.
Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.
S&F 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.
S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed
S&F 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.
S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.
S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)
S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 for waste pipe complete all as specified.
S&F cast iron cowl for 75 mm dia all as directed by Engr-in-charge.
M&L in repair 150x100 mm Salt glazed stoneware gully traps, square or round mouthed, type‘P’
S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 75 mm dia of pipe
20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement ( Note -Cost of WPC shall be included in this item quoted by the Contractor)
APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing /new surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying one coat bitumen grade 85/25 @ 1.20 Kg/Sqm (f) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
M&L 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, urinal partitions , cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed in CM 1:4 including Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, with toughened glass., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
Rolling and consolidating formation surfaces in cutting by using power roller exc 8.0 ton and not exc 12 tonne all as specified
M&L for soling of sub base 200 mm spread thickness with broken boulders or quarried stone, inter stices filled, surfacesformed and rolled and consolidated to required gradient and camber by using 8 to 10 tonne roller all as specified and directed complete
M&L 15cm thick (compacted thickness, two layers 7.5 cm each) WBM with coarse aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required
M&L for sand (dry) as in under layer of paving all as specified
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade
M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded sstone aggregate as in kerb/coping along with the sides/edging of path including necessary formwork complete all as specified
Excavation and trenches n. exc 1.5 m wide and n.exc 1.5m in depth for foundation of manhole, as in any type of soil.
Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius for manhole/septic tank drain etc built in CM (1:4) all as spd and directed
M&L for 15mm thick plaster in cement mortar 1:4 finished even and smooth without using extra cement mixed with water proofing compound. ( Note -Cost of WPC shall be included in this item quoted by the Contractor)
Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc.
M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C2 for 150 mm dia pipe.
M&L 150 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete allas spd
M & L for providing cement concrete 1 : 2 :4 type B1, using 20 mm graded stone aggregate as in bed block and copings, and the like including weathering, slightly rounded or chamfered angles and throating, with necessary form work as required & all as directed.
M & L for providing precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) and similar small articles with plain fair surfaces, and set in cement mortar 1:4.Completed all as specified and directed.
M & L Cement concrete 1 : 3 : 6 type C2 (using 40 mm graded stone aggregate) as foundation filling mass concrete.
M & L Cement concrete 1 : 2 : 4 type B1 (using 20 mm graded stone aggregate) as surface channel and drains.
M & L for plain cement concrete Type B-O, 1:2:4 (using 12.5 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating and use of form work.
M & L for Flush pointing to brick walls in cement mortor 1:3 complete all as specified and directed by engineer in charge
M & L for rendering 10 mm thick in CM 1 : 4 on fair faces of brickwork or concrete surface finishing the surface even and smooth without using extra cement.
M & L for point wiring complete with PVC insulated and unsheathed, copper conductor cable Multistrand FRLS single core 1100 volt grade electric cable of 1.5 sqmm (nominal area) in and including concealed rigid PVC conduit of suitable size as per site requirement including 1.50 sqmm PVC insulated & unsheathed copper cable as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following for One light point or one fan point controlled by one switch SP 230 Volts . Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items :- Make of Wire : Havells/KEI/HPL
All as per Srl item No 102 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd. Make of Wire : Havells/KEI/HPL
All as per Srl item No 102 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board. Make of Wire : Havells/KEI/HPL
All as per Srl item No 102 above but for One light point controlled by two 2-way switch Make of Wire : Havells/KEI/HPL
All as per item No 102 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items :- Make of Wire : Havells/KEI/HPL
S & F Bell electric ding dong AC 230 V single pole complete all as specified and directed. Make : Anchor/Cona/Standard
S & F Modular Bell push 6A,1way, 1module, complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree
S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.Make Anchor Roma/Legrand Aretor/Crabtree
Supply and fixing switch modular 6 Amps 230 Volts one way switch. Make Anchor Roma/Legrand Aretor/Crabtree
Supply and fixing switch modular 6 Amps 230 Volts Two way switch. Make Anchor Roma/Legrand Aretor/Crabtree
S&F Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S & F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Anchor/Cona/Standard
S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make Anchor/Cona/Standard
S & F Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S & F Modular white cover plate with frame 3 module and metal flush box 3 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S & F Modular white cover plate with frame 4 module and metal flush box 4 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S & F Modular white cover plate with frame 6 module and metal flush box 6 module complete all as specified and as directed. Make Anchor Roma/Legrand Aretor/Crabtree
S & F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified. Make-Havells(LHEXBXPNIN1WO20)/Wipro(LL20-221-XXX-65-NE)/HPL(HLPT51820PCGCW)/Philips (BN021CLED20SPSUCDLGR)
S & F LED Mirror light fitting 1 x10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed. Make - Wipro Cat Part No LL20-111-XXX-65-NE or equivalent in Philips/Havells
S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed.Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)
S & F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix
S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 8 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge .Make Indoasian/L&T/HPL
S&F MCB SPN 40 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity all as specified and directed . Make Indoasian/L&T/HPL
S&F MCB SPN 63 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity all as specified. Make Indoasian/L&T/HPL
S&F single pole MCB 6 TO 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘c’ curve, 10 KA breaking capacity all as specified. Make Indoasian/L&T/HPL
M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Wire : HPL/Havells/KEI
Supply & Fixing ceiling fan AC single phase 230/240 V of size 1200 mm sweep including connect with PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 sqmm and including hanging arrangements made out of MS clamps with nuts, bolts and washers all as specified and directed by Engr-in-Charge. Make Anchor/Almonard/Havells
S&F Storage water heater 25 ltrs capacity vertical mounting AC 230 Volts BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, PVC Flexible connections with length 450mm long 15mm dia with brass hexagonal adoptors both side duly ISI marked Suitable for hot/cold water complete including grouting of nuts and bolts, complete all as specified and directed Make Havells/Venus/V Gaurd
Supply & fix ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose all as required or directed.
Material and labour for DWC pipe of 50 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed .
Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 16 Sqmm x 2 Core.
Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.
Supply and fixing 60 watts LED building security light fitting including suitable bracket and nut bolts etc all as specified and directed by engr in charge
S&F in repairs street light fittings 30 watt LED energy saving, environmental friendly long life versatile pressure die cast housing with toughned glass IP 66 protection, impact resistance of IK 07 & 10 KV external SPD roadway luminaire with high power LED with secondary optics and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part No LSTS 30 CDL or equivalent in Philips, Havells, wipro as approved by GE complete all as directed by Engg. in charge.
Supply and lay 50mm bore galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trenches complete all as specified and drected of the following bore:-Note : Excavation & earthwork & PCC work will be measured & paid sperately :-
M & L for PCC surface width not exceesing 60 cm and making good of surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finsihed even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone aggregate over consolidated/rammed earth surface & making pole foundation wherever its necessary all as specified & directed
S&F 25 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron
S&F 25mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified from existing pipeline.
Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia
M&L for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed
Supply and fix MS locking unit, 18 lockers, 22 Guage, spray paint. Size 1 unit L11"xD20"xF11", H60"xW36"xD20"
Supply and fix three seater metal perforated chair with integrated seats and backrest with arm and backrest solid steek v-shaped powder coated of length 68.5 inch and height 30.5 inch
M/s Nilesh Enterprises
M/s. SAGAR MOHAN HENS
Vinod Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .