REPAIR / REPLACEMENT OF ELECTRIC FITTINGS AND FIXTURES, DBS, WIRING, SUB MAIN , EARTHING ETC AND REPAIR/ OVERHAULING OF CEILING FANS, EXHAUST FANS , WALL FANS, AIR CIRCULATIONS, AND GEYSERS AND ALLIED WORKS AT BLOCK A , BLOCK B , MD ACCN AND COMPLAIN

Amount

Taking down carefully copper/aluminium point wiring of any type, batten or conduit, (Light, Fan, Socket or power) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge.

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings. (Rate for cutting chasis of walls all are included in the quated rate)

(a) One light point or one fan point or bell point controlled by one switch or bell push

(b) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch

(c) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 2 (d) here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in Existing PVC concealed Conduit Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

(a) One light point or one fan point or bell point controlled by one switch or bell push

(b) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch

(c) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 2 (d) here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in open conduit/casing caping of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

(a) One light point or one fan point or bell point controlled by one switch or bell push

(b) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch

(c) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 2 (d) here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing for the following. [Note: - Modular switch boards shall be measured and paid separately rate for cutting chasis of walls all are included in the quated rate)

(a) One light point or one fan point or bell point controlled by one switch or bell push

(b) One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch

(c) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 2 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

S & F Modular Switch 1 way 6 A, 1 module

S & F Modular Switch 1 way 16 A, 1 module

S & F Modular Socket 6 A, 2/3 pin combined 2 module

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module

S & F Modular Fan step regulator, 120 watt, 2 module

S & F Modular Bell push 6A, 1 module

S & F Modular Blank plate, 1 module

S & F Modular type White cover plate with frame 1 module

S & F Modular type White cover plate with frame 2 module

S & F Modular type White cover plate with frame 3 module

S & F Modular type White cover plate with frame 4 module

S & F Modular type White cover plate with frame 6 module

S & F Modular type White cover plate with frame 8 module

S & F Modular type Metal Flush box 1/2 module

S & F Modular type Metal Flush box 3 module

S & F Modular type Metal Flush box 4 module

S & F Modular type Metal Flush box 8 module

S & F Modular type Metal Flush box 6 module

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed .

Supply & fixing of bell push, flush type 05/06 Amps, 240 volts complete all as specified & directed .

Supply and fixing bell, AC, 230 volts, single pole, ding dong type size compete all as specified & directed.

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply and fixing ceiling fan regulator, electronic, type, rotary 0 to 04 steps, hum free, AC , 230 volts , 100 watts duty ISI Marked with and including modular white surround complete all as specified & directed .

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 100 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed. Make PHILIPS SMART BRIGHT XTRA S4 CAT NO. BN100C LED20S-6500 PSUL120 GR S4 / HAVELLS MODEL LUMLINE SMART CAT NO. LUMLINE SMART 20W LED 865PCWH / HPL CAT NO. HPLBT20WPCIMSCW

S&F Light emitting Diode (LED) tube light fitting surface type, indoor decorative aluminium extruded T5 LED battens , Integrated type, box type AC 220-240V, 50 hz, with acrylic diffuser 10 watt, 2' long, and making connections with and including 23/.0076 copper conductor flexible cord of required length from ceiling rose to connector complete all as specified and directed.Make Crompton TRIM LINE NEU Cat Part No CCS-103-10-65-SL-DP-NWH/ Havells Model LUMILINEPLUS CAT NO LUMULINE+ BS10WLED865SPCSS /Philips MODEL SMART BRIGHT CAT NO.BN 021 LED12S- 6500 PSU GR / CROMPTON MODEL TRIMLINE NEU CAT NO. CCS-103-10-65-SL-DP-NWH

S & F Recess mounted economical LED panel light 2`X2` 36 watt with high quality diffuser for uniform light with 100lm/w housing of pressed aluminium sheeet with complete all as specified and directed. HPL CAT NO. LEDPN36-E(CW) 1X4/ Crompton MODEL Polaris III CAT NO. LCTLSNE-36-FO-CDL/ PHILIPS CIRRUS SURFACE CAT NO.SM365C LED32-6500 PSU OD WH/HAVELLS MODEL PLANO SURFACE ,PLANOSUR 2X2 PLS 36WLED857S

S & F Surface mounted economical LED panel light 2`X2` 30watt with high quality diffuser for uniform light with 100lm/w housing of pressed aluminium sheeet with complete all as specified and directed.Make Crompton MODEL Polaris III CAT NO. LCTLSNE-30-FO-CDL/ PHILIPS CAT NO.SM365C LED32-6500 PSU OD GR / HPL CAT NO. LEDPNCRC30CW-S

S&F LED Bulk Head Fitting 10 Watt housing made up corrosion resistant unbreakable PC with high quality diffuser for glare free Aesthetically designed gaskit IP65 protection 100 lm/watt complete all as directed. Make CROMPTON MODEL STUD Cat No. LBHP-10-CDL/ PHILIPS MODEL ENDURA LED BULK HEAD CAT NO.WT202W LED6S CW PSU S2 PC/HAVELLS MODEL RUGBY GENX 10 CAT NO RUGBYGENXFTS10WLED865SSYMBOPC

S&F decorative wall bracket light Fitting 10 Watt as per sample directed by Engr-In-Charge complete all as directed

Supply and fix in repair Top Bollard LED light light fittings 40 Watt complete all as specified and directed.Make/Crompton MODEL MAPLE LPTO-40-CDL/HAVELLS MODEL NEBULA LED POST TOP CAT NO. NEBULAPT40WLED857PSYMTOPC/HPLLEDBPS9W

Supply and fix in repair LED Cone round post top lantern clear/ milky diffuser spun cover, die cast pole mounting, IP 65, module ,light fittings 40 Watt including fixing in concrete post suitable size GI pipe complete all as specified and directed. Make;-HPL CAT NO HPLLEDPCLR40W/Crompton CAT NO LPTO-40-CDL / HAVELLS NEBULA LED POSTTOP CAT NO. NEBULAPT40WLED857PSYMTOPC

Material and labour for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping of poles / pipes / strip alignment etc using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement, as directed by the Engineer-in-Charge. (for foundation of post top and bollard).

S&F PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from junction box to light fittings including with suitable size copper lugs as in repair complete all as specified and as directed by the Engr-in-Charge.

M & L for sub main wiring with 1.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 2.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

M & L for sub main wiring with 10 Sqmm nominal cross sectional area, 4 single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 10.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.

Supplying and fixing 10 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular complete all as specified and directed.

Supplying and fixing 6 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, two twin core cable flat or circular complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply & fixing MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed.Make;- Havells/C&S /Legrand

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed

Supply & fixing MCB, TPN, 415 volts of 100 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply & fixing MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply & fixing MCB DB Box 12 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply & fixing Sheet Metal Enclosures TPN, 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

Supply & fixing Sheet Metal Enclosures vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.

S&F MCCB 4Pole .415 V. fixed type,63/100 Amps with breaking capacity 16 KA complete al as specified and directed

Supply & fixing Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections complete all as specified & directed including taking out old u/s any capacity.

Supply and fix in repair metal clad socket 20 Amp 2P+E,230 volt AC complete all as specified and directed

Supply and fix in repair metal clad plug 20 Amp 2P+E,230 volt AC complete all as specified and directed

Supply in repairing casing caping 25 mm complete all as specified

Supply in repairing casing caping 15 mm complete all as specified

Supply in repairing flexible conduit 25 mm complete all as specified

Supply in repairing flexible conduit 32 mm complete all as specified

S&F in repair Hylum sheet 3 mm thick of 9"x5" size for fix suitable PT switches/sockets/regulator complete all as specified and directed.

S&F in repair Hylum sheet 3 mm thick 9"x7" size for fix suitable PT switches/sockets/regulator complete all as specified and directed.

M & L for LED Bulb 12 watt 240 volt

S&F Exhaust fan PVC body 250 mm sweep complete all as specified and directed

Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I.

Supplying, fixing including connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 30 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed

Taking down carefully storage type water heater( geysers) of 25 and /or 50 litres capacity for servicing after disconnecting existing water supply and electric connection by unscrewing/ cutting of holding bolts/ nuts from walls and de-assembling it for repair including taking out inner assembly and scraping scale deposits on the surface of assembly and water pipe, cleaning and washing and re-assembling after repairs and fixing the same in its original position by using new mild steel expsnsion fastners /bolts, nuts and washers of required size , making good disturbed surfaces to match with existing and making necessary water supply and electric connection and testing complete all as specified and directed. Note:- Parts renewed shall be measured and paid separately under appropriate items

Renewal of Bronze non return valve (ISI marked) suitable for 15mm nominal bore of pipe, heavy duty complete all as specified.

Renewal of copper sheathed and nickel plated heating element 1.5 KW (ISI marked) triangular/ Cup shaped push/ threaded type suitable for horizontal or vertical type water storage type water heater( Geysers) all as specified and directed.

Renewal of copper sheathed and nickel plated heating element 2 KW (ISI marked) triangular/ Cup shaped push/ threaded type suitable for horizontal or vertical type water storage type water heater( Geysers) all as specified and directed.

Renewal of CP Brass inlet and outlet assembly complete with rubber gasket, nuts, bolts and washers including copper sheathed and nickel plated heating element 2 KW (ISI marked) triangilar/ Cup shaped push/ threaded type suitable for horizontal or vertical type water storage type water heater( Geysers) all as specified and directed.. for 25/ 50 litre capacity storage type water heater complete all as specified and directed.

Renewal of thermostat, minimum 300 mm long, suitable for any make & type of geyser 25 / 50 litres capacity horizontal or vertical type all as specified and directed.

Renewal of Bellow thermostat suitable for any make & type of geyser 25 litres capacity horizontal or vertical type all as specified and directed.

Renewal of Bellow thermostat suitable for any make & type of geyser 50 litres capacity horizontal or vertical type all as specified and directed.

Renewal of neon Indicator Bulb ( Red and green) all as specified and directed.

Supply and fixing of rubber/PVC gasket to ensure water tightness of 25 Ltr geyser suitable as per sample complete

Supply and fixing glass wool (spl quality) at thermal insulation after removing the old glass wool in between the inner container and outer casing complete all as directed by Engineer-in-Charge.

Renewal of spring loaded air release safety valve 15mm dia made of Brass Nickle/ Chromium plated all as specified and directed.

Renewal of stainless steel inner cell of 25 litres capacity geyser and making connections by brazing including all asseccories all as sepcified and directed.

Renewal of stainless steel inner cell of 50 litres capacity geyser and making connections by brazing including all asseccories all as sepcified and directed.

S&F Mild steel clamp of flat iron of size (25X6mm ) made to shape 100mm long welded with outer casing of geyser to walls with bolts and nuts complete all as directed by Engineer-in-Charge.

Renewal of steel assembly heavy duty powder coated to match with the colour of existing geysers suitable for 25 litres capacity all as sepcified and directed.

Renewal of steel assembly heavy duty powder coated to match with the colour of existing geysers suitable for 50 litres capacity all as sepcified and directed.

Renewal of PVC connection SS heavy duty suitable for Hot/ Cold water connections in geysers braided 450mm long with flare brass nuts on both ends complete all as specfied.

S & F Chromium plated brass angular stop cock concealed with wall flange fixed to 15 mm bore of iron pipe as in repair etc complete all as specified and as directed.

S&F plug Top 3 pin 15/16 Amp AC 230 Volts complete all as specified and directed

S&F LED indicator PCB for Geyser of capacity 25litrs AC 230 Volts complete all as specified and directed

Renewal of hex nipple 15mm bore heavy duty complete all as specfied.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. ®

Taking down of existing unserviceable wall fans and S&F wall mounting fan 400 mm sweep in replacement including making connections with suitable size of copper wire and making good surfaces complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Taking down existing unserviceable ceiling fan of 1200mm sweep from fan box/ hooks by disconnecting electrical connections from ceiling rose, de-assembling the fan , cutting the winding and removing the coils and rewinding the fan with suitable size of super enameled copper winding wire, insulation, varnishing, greasing and assemling the fan, cleaning and testing the fan for its rpm and others and refixing the fan in its position and making connections with existing wire with terminals of ceiling rose complete all as specified.

Taking down existing unserviceable ceiling fan of 1400mm sweep from fan box/ hooks by disconnecting electrical connections from ceiling rose, de-assembling the fan , cutting the winding and removing the coils and rewinding the fan with suitable size of super enameled copper winding wire, insulation, varnishing, greasing and assemling the fan, cleaning and testing the fan for its rpm and others and refixing the fan in its position and making connections with existing wire with terminals of ceiling rose complete all as specified.

Taking down existing serviceable ceiling fan of any sweep from fan box/ hooks by disconnecting electrical connections from ceiling rose, de-assembling the fan , removing and cleaning of dust properly , oiling and greasing bearings/ bushes including renewal of washers, split pin, screws, checknuts, pin etc. and re-assembling and refixing in position , connecting and testing complete all as specified.

Taking down existing unserviceable exhaust fan of 450mm/380mm sweep from fan box/ hooks by disconnecting electrical connections from ceiling rose, de-assembling the fan , cutting the winding and removing the coils and rewinding the fan with suitable size of super enameled copper winding wire, insulation, varnishing, greasing and assemling the fan, cleaning and testing the fan for its rpm and others and refixing the fan in its position and making connections with existing wire with terminals of ceiling rose complete all as specified.

Taking down existing unserviceable exhaust fan of 300mm sweep from fan box/ hooks by disconnecting electrical connections from ceiling rose, de-assembling the fan , cutting the winding and removing the coils and rewinding the fan with suitable size of super enameled copper winding wire, insulation, varnishing, greasing and assemling the fan, cleaning and testing the fan for its rpm and others and refixing the fan in its position and making connections with existing wire with terminals of ceiling rose complete all as specified.

Taking down existing serviceable Exhaust fan of any sweep from fan box/ hooks by disconnecting electrical connections from ceiling rose, de-assembling the fan , removing and cleaning of dust properly , oiling and greasing bearings/ bushes including renewal of washers, split pin, screws, checknuts, pin etc. and re-assembling and refixing in position , connecting and testing complete all as specified.

Taking down of existing unserviceable exhaust fan plastic body 250mm and S&F exhaust fan plastic body 250mm sweep in replacement including making connections with suitable size of copper wire and making good surfaces complete all as specified.

Renewal of cylinder capacitor 2.5 MFD with earthing terminal for ceiling fan / cabin fan motor including soldered leads for connections ISI-1709 , MPP ( metallised polypropylene , SH( self healing) , of the following capacities complete all as specified .

Renewal of cylinder capacitor 4 MFD with earthing terminal for Exhaust fan motor including soldered leads for connections ISI-1709 , MPP ( metallised polypropylene , SH( self healing) , complete all as specified .

Supply & Fix ceiling fan down rod of MS pipe 15mm bore of length as per site measurement including cutting/threading making tide for fixing providing check nuts wachers etc complete.

S & F blade white colour 1200 mm sweep with and including nut bolts for fixing suitable for Usha, Polar, Orient complete all as specified and directed.

S & F blade white colour 1400 mm sweep with and including nut bolts for fixing suitable for Usha, Polar, Orient complete all as specified and directed. .

S & F PVC insulated 23/0.0076 flexible cord twin core with stranded copper conductor as specified and directed Make Finolex

Renewal of ball bearing of any size for celing fans/ wall bracket fan, cabin fans , table fan etc(bearing number 6201,6202,6203 as required). all as specified and directed.

Taking out unserviceable bush from ceiling fan and making arrangement for ball bearing by lathing at workshop complete all as specified and directed.

Renewal of Gunmetal bush bearing of suitable for exhaust fan etc. of any size complete all as specified and directed.

Renewal of mild steel hanging clamps suitable for any sweep of fans including necessary nuts, bolt and washers and split pin complete all as specified and directed.

S & F GI tubing, medium grade of size 15 mm bore fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc including taking down existing GI tubing including making good of existing surface coplete all as specified.

Renewal of upper and lower plastic canopy of any sweep of ceiling fans complete all as specified and directed.

Renewal Poly carbonate Body plug top 3 pin, 6 Amps, ,230 Volts complete all as specified.

AEGIS INTERNATIONAL

VIRAT CONSTRUCTIONS