Provision of raising the platform to High level at Chandur, Sindi & Tulajapur Station of Nagpur Division under UMB 2024-25 under PH-53.

Railway Station of Nagpur Division under UMB 2024-25 under PH-53.

Item- 01 Provision of boundary wall at Tuljapur 200m.

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and for all lift, as directed by

Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.0 REINFORCEMENT CEMENT CONCRETE

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

5.1S CAST IN SITU

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

Reinforced cement concrete work in walls (any

thickness), including attached pilasters,

buttresses, plinth and string courses, fillets,

5.2 columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five

level, excluding cost of centering, shuttering,

finishing and reinforcement :

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 120 392.15 47058

for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, Sqm 120 736.4 88368

bressummers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Sqm 80 961.3 76904

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Kg 6500 107.85 701025

Fe-500D or more.

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 6000 107.85 647100

Fe-500D or more.

6.0 MASONRY WORK

6.1S General

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

10.0 STEEL WORK

10.1S General

10.1 Structural steel work in single section, fixed Kg 4000 117.35 469400

with or without connecting plate, including

12 cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

13.44S EXTERIOR FINISHING

Finishing with Deluxe Multi surface paint

13.48 system for interiors and exteriors using Primer

as per manufacturers specifications :

13.48.1 Two or more coats applied on walls @ 1.25 Sqm 1000 193.7 193700

14 ltr/10 sqm over and including one coat of

Special primer applied @ 0.75 ltr /10 sqm