72/EEC/BSNL/CD/BGL/2023-2024

Amount

Cleaning of particle board panels of dust, dirt stains, bird dropping by dry mopping, dusting and cleaning of laminated face with detergent diluted in water to remove water stains, grease layer, dirt marks with wet cotton mops and dry cottan mop etc. without any damage to colour, gloss of lamination due to chmicals complete as directed

Removing old /torn out jute fabric fixed on acostic wall panels with application of cutter, screw driver as required including disposal of unserviceable material for lead of 50m (Fabric panel area of @40sqm)

Removing photo frames, mementos of BSNL exibited in conference hall (hanging on walls & placed in showcase etc.) including removing all screws from acostic panel including stacking the material in a box and carriage to a lead up to 50m.

Dismantling M.S. grills in windows by removing screws and refixing after attending repairs & painting of shutters etc. complete as directed.

grill of size up to 1.00sqm area

Repairs to wooden window shutters by tightening of loose hinges/joinery with new screws and wood pins and L-bracket wherever required, replacing damaged hinges (to be paid separately) slicing/grinding of edges to remove excess paint or overlapping wood, repairs for tower bolt locking, spray cleaning with WD-40 solution of tower bolt and repairs for smmoth operation complete

Shutter of size up to 1.00sqm area

Repairs to false ceiling of metal sheet strips in conferencr hall by removong loose brackets supporting hanging arrangement on walls providing new SS screws and GI wire for hanging in position alignment of sheets in proper level as directed by Engineer-in-charge.

Cutting of banyan/peepal tree growth around pipes/chambers up to sixth floor level and root extractions with following operations (scaffolding and dismantling of pipes shall be paid for separately wherever required as per direction of Engineer-in-charge) a) Cutting branches/stems with hand saw/axe etc. including drilling 10mm dia. holes of 100mm deep in as many branches as possible at site and grouting Systemic Herbicide containing Glyphosate 41% (Glycocin of Maharashtra biofertilizer or roundup of Bayer) with 10ml injection syringe, with all safety precaution such as hand gloves, plastic container for handling the chemical, soap for washing hands immediately after grout opertation under proper supervision b) Uprooting the left over stem/roots embeded in masoary wall/slab adjecent to drainage pipes, after fifteen days with chiesel and pluging gap with cement mortar, disposal of vegetation, debris within 50m lead.

Providing and fixing Acoustic purpose polyster fabric (MMT Acostix fabric or equivalent) in approved colour and shade, high density acoustic foam laminated on back with NRC Value 0.20, fire rating class-c ( fabric weight shall be 500gm to 750gm/sqm) complete as directed by Engineer-in-charge

Removing wooden beading fixed on acostic wall panels cleaning wax filling removing wood screws and stacking properly without damaging as directed.

50mmx 12mm beading

Fixing available wooden beading (supplied free of cost) on wall panels with MS screws (new) after fixing of acostic fabric in vertical alignment complete as directed by Engineer-in-charge.

50mmx 12mm beading

Providing and fixing 2.00mm thick Vinyl Flooring complying EN 14041, CE certified of approved manufacturer (Talitha series of Responsive ind. Meteor wonderfloor or equivalent) in tile pattern or sheet pattern with hair-thin joint on hard & levelled base pasting with synthetic rubber adhesive (SR-505 of fevicol or equivalent) pressing with light wooden roller, cleaning base floor with dry & wet mopping before fixing, lift up to 30m complete as directed by E-I-C.

Dismantling antistatic/PVC flooring of approx. area 190.00 sqm including disposal of disamntled materilas to the BBMP dumping yard including Washing and cleaning the entire floor with mild soap solutions scrapping layer/spots of adhesive film on hard floor surface cleaning complete as per direction of the Engineer in Charge

Providing and fixing vertical blinds of approved shade, quality brand and manufacture including necessary fixtures such as Rails, Carrier, tracks and wheels, Tilt shaft, Traversing chord, Bead tilting chain, Louvre spacer links, gears, Sprocket wheels, end caps, Bracket attachments and accessories etc, compete as directed.

Dismantling conference tables by unscrewing brackets fixed to floor and shifting of table for PVC floor laying as and when required and refixing in position after laying PVC floor complete as directed

Round conference table having lamination area of 1400.00 sq.Feet

Conference table (linear) having lamination area 145.00 sq.feet

Cutting chase in existing terrazo tile floor for laying of raceways/conduit etc. with mechanically operated cutter machine/grinder, removing losse tile and mortar base with chiesel cleaning and disposal of debris for lead of 50m

a) Upto 150mm wide and depth 50mm

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)

Second class teak wood-30 mm thick shutters

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Supplying and fixing in position 25mm PU foam sheet packing in pair alround PVC cable for pouring of chemical solutions in a gap of 50mm uniform width including cleaning of cable, pipe outlets with jute/mop etc, opening heavy weight manhole covers and closing after above operation complete as directed.

Filling PVC pipe/cable entry hole to prevent rodents with cementitious material having gaseous expansion property in plastic state to compensate shrinkage property (Conbextra GP2 of FOSROC or equivalent) mixed with 20mm nominal size stone aggregate 25% by volume to build up total plug thickness of 100mm including preparation of grout mix as per manufacturers specification, cleaning debris, curing of grout etc. complete as directed by engineer-in charge.

Pipe inlet of 50 to 100mm dia. and 100mm length

Polishing wooden beading with Polyurethane based clear polish (ASIAN PAINTS WoodTech PU Interior or equivalent) in high gloss finish including rubbing old polish on beadings plain/moulded with sand paper of fine and coarse grade, mopping dust, applying two PU sealer coats of same manufacturer, filling holes, joints and cracks with putty and applying special grade PU fillers to fill all the small and big holes/grooves etc then applying one coat of PU sealer coat using air compressor & spray gun to give uniform and glossy finish allowing further drying for 12 hrs. Finally applying a coat of PU polish (ASIAN PAINTS WoodTech PU Interior or equivalent) with compressor pressure spray gun complete as directed.

50mmx 12mm beading

40x25mm beading

18x5mm beading

Lectren table polish on exposed faces about 5.00 sqm area polishing edge moulding @ 10.00m with

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

One coat.

Dismantling aluminium partitions, doors, windows, fixed glazing board etc including disposal of unserviceable material and staking the same carefully with in the premises at all levels etc. complete as per the directions of the Engineer-in-charge.

Dismantling ceramic tile flooring laid in cement mortar including stacking material within 50 metres lead.

Ceramic Tiles up to 8mm thick

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling unserviceable CI pipe & fittings such as traps, bends, Y-junctions etc and CI pipe pieces up to 50cm length exposed for repairs /replacement in sunken portions below W/C, Bath, W/B etc. including cutting of service drain pipe with cutter/saw without disturbing drainage outlets etc. cleaning the site and disposal of material within 50m lead and 25m lift complete as directed.

Providing and filling light weight cinder in sunken portions etc. complete as per directions of E-I-C (Nominal size 20mm)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing on wall face Health Faucet of ABS Body including 1.20 Meter Long PVC flexible pipe & Wall Hook (ESSCO or equivalent)

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area up to 0.75 sqm.)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

20 mm nominal dia Pipes

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe -32 mm dia

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length

Providing and fixing C.P. brass 2-Way bib cock with Wall Flange for European commode of approved quality and brand (ESSCO/parryware or equivalent)

Providing and fixing one piece white vitreous china European type water closet of HINDWARE Make (Model-AlpineS-220) of size-650x350x 660mm with integral white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre, including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete.

Providing and fixing Stainless steel grating of approved quality

Rectangular type with openable circular lid 125 mm nominal size square 100 mm diameter of the inner hinged round grating

Making connection of CPVC distribution branch with G.I. main of following sizes by providing and fixing tee, threading the pipe including cutting and fixing with CPVC solvent cement etc. complete :

25 to 40 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type-B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

a) 100 mm dia pipe

b) 75 to 80 mm dia pipe

Providing and fixing rigid SWR UPVC fittings for PVC pipes of approved quality as directed by Engineer-in-charge.

PVC reducer collar 90-110mm

PVC plain bend 110mm

PVC Reducer TEE without door-110mmx75mm

PVC Coupler-75MM

Providing and fixing PVC-SWR multi floor trap of self cleansing design with PVC grating over top inlet complete, including cost of cutting and making good the floors :

100 mm inlet and 75mm outlet with 100mm height

Providing and fixing toilet paper holder : a) C.P. brass

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) :

For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing glass shelf 600mm long edges polished, decorative CP brass support bracket and guard rail (JAQUAR-continental series) complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing 170 mm dia. CP brass towel ring (ESSCO model-AEC-1121N Make) complete fixed with brass screws, rawl plugs etc., complete.

Deep cleaning of toilets by removing grease, dirt and limescale stains on ceramic tiles in daddo, floor, WC pans, wash basin, taps, etc with special cleaning chemicals and trained professionals including use of rubing, grinding tools and microfibre mops etc. washing & dry mopping of toilet complete as directed.

Single user toilets up to area of 6.00sqm

Providing and fixing sliding window handle cum lock (concealed type) of approved make colour with necessary screws complete as directed.

Credit to the agency for material recovered by dismantling under relevant items of this agreement

GI/MS/CI Pipes