Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹45.5 L+₹72,207.50 (1.61%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹46.7 L+₹1.9 L (4.24%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 4 | L4₹49.4 L+₹4.6 L (10.3%)Rejected-Finance | L4 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 5 | L5₹49.8 L+₹5.1 L (11.3%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L5 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹50.0 L
EMD Value
₹99,960
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
CERTAIN REPAIR/ MAINT WORKS TO BLDGS OF DGNCC CAMP AND MARRIED/ OTM ACCN IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
2023_MES_606480_1
GE/DE-42/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,960
Yes
31 Aug 2023
28 Jun 2023
4 Aug 2023
28 Jun 2023
2 Aug 2023
19 Jul 2023
Amount
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Taking down cement or cement lime plaster , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium/Ist quality acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1mm thick wall care putty complete all as specified and as directed. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Make Shall be approved by GE. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL TOTAL)
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete.
M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 including demolition of existing flooring or tiles of any type and size complete all as specified and as directed.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path over 50mm thick sand cushioning incl demolition of existing flooring or tiles of any type of any size complete.
M & L for Non-Skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 300 x 200 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L for machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling of existing kota stone floor of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.
Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.
Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.
M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.
Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.
M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.
S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.
S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 55 mm thick ( design and patern as approved by GE) set in CM (1:4) including all mouldings but excluding frame fixed over bdy wall or walk ways or in any position etc complete all as specified and directed.
S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified.
S & F 2 mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc and including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed. complete all as specified
S & F E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F Aluminium alloy powder coated door including frame comprising of section (Door frame single groove 101.6mm x44.45mm x 2.1mm thick, Shutter top 47.62mm x 44.45mm x 1.95mm thick, shutter bottom 114.30mm x 44.45mm x 2.15mm thick, shutter vertical 85mm x 44.45mm x 1.80mm thick, shutter middle 83.5mm x 44.45mm x 2.40mm thick & glazing clip weighing not less than 0.097 kg/Mtr) as approved by GE & as per IS specifications including provision of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring, locking arrangement, rubber gasket and stopper complete all as specified & directed.
Anodized aluminum alloy powder coated standard hollow section with special powder coated coloured of any tint window frame with one glazed shutter (fixed) and two Nos. glazed with 5.5mm thick tinted glass of superior quality and wire gauzed shutter with stainless steel wire cloth 0.36mm nominal dia wire and 1.4mm average width of aperture of sliding type, made out of Jindal sectionaluminium section as per series A (15mm) three tracks, including aluminum alloy powder coated grill and snap type beading, aluminium powder coated handle and barrel tower bolt with glazing clips and jointing cleats, rubber gasket complete ame/chowkhat with following specifications including anodized aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gasket and other accessories etc., complete all as specified and directed
S & F in repairs prelaminated particle board 18/19 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws to timber framework all as specified and directed.
S & F in repair vitreous china wash basins , flat back size 550x400 mm white excluding taps,waste coupling and pipe but including brackets all as specified and directed.
S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.
Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.
S & F for flush shutters 40 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.
S & F in repairs Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed.
S & F 100mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
S & F 100mm size stainless steel butt hinges complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.
S & F 150mm size aluminum adodised handles complete all as specified and as directed.
S & F mild steel pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed.
S & F for 150mm long mild steel barrel tower bolts of extruded section complete all as specified and as directed.
S & F in repairs 250 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete all as specified and directed.
Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.
S & F in repairs 75mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.
S & F in repairs 75mm dia Cast iro Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S & F in repairs 75mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
S & F in repairs 75mm dia cast iron cowls complete all as specified and as directed. (Note: The work shall be executed upto a height of 4 storey Bldgs, Upto 15 Mtrs, Necessary scaffolding, hanger and seafty instruments shall be deemed to include in the quted ratess)
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of Oil bound distemper complete all as specified and directed.
M & L for Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M & L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M & L for glazed ceramic coloured designer pattern tiles 8-10mm thick in vertical surfaces area of each tile exceeding 0.36Sqm but not exceeding 0.74Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4 including dismantling of existing floor wall tiles, stone slab of any description complete all as specified and as directed.
M & L for coloured wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.36 Sqm of 8-10mm thick on vertical surfaces of wall over 10mm thick rendering and as per sample approved by GE including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed. Make Jaquar/Cera/Hindware
S & F for Wall mounted multiple function Shower Panel including all acessories and fittings, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No. 511686 (size 1650mm x 150mm x 550mm)/Jaquar Cat Part No. JPL-SSF-ST88148B(size 1600mm x 200mm) or JPL-WHT-TMCURVENEO (size1500mm x 230mm) or eqivanlent in Cera/Somany
S & F Full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting taking down existing wash hand basin of any type and size, fixed in repairs, complete all as specified and as directed.
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F 20mm outer dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fittings ISI marked on walls/ceiling or laying in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repairs Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S & F in repairs Angle valve of CP brass high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs 2 in 1 cast copper alloy Chromium plated Angle valve 15mm bore complete.
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)
S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.
S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed.
S & F in repairs Sinks with drainage board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx 160mm all as specified and directed.
S & F in repairs Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)
M & L 16-18 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
M&L Wooden flooring of size 1215mm x 168mm x 8mm thick rectangular tiles fixed in floor/dado over existing floor with foam sheet of best quality including jointing/end covering strip including all other fixing materials, including taking down existing wooden flooring of any type complete all as specified and as directed.
S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete including demolition of cement concrete (unreinforced) in ground floor and paving near 15 cm thick (below or above ground level) all as specified and as directed.
sunil traders
Vipul Construction
SREE BABA TRADERS
S GOURAV PRAKASH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .