Repairing of Roof Leakage, Painting of Bathroom Wall, Corridor, Staircase and Repair Replacement of Water Tank at UG Hostel Bhakatpara, FAAMCH Barpeta

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 65 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal dia Pipes

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour. 18.54.4 15 mm nominal bore, 90 mm long, weighing not less than 93 gms

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Suppply, Installation, Testting and Commissioning of 1200 mm sweeep, BEE 5 star rated ceiling fan with Brush Less Direct Currrent (BLDC) Motor, class of insultation :B ,, 3 nnos blades, 30 cm long down road ,2 nos. canopies ,shackle kit , safety rope , copper winding, Power factor not less than 0.9, Service Value (CMM/W ) minimum 6.85 , Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 3742019) , THD less than 10%, remote or electronic regulator unit for spend control and all remaining accessories including safety pin, nut bolts, washers , temperature rise =75 degree C (max) , insulation resistance more than 2 mega ohm , suitable for 230 V , 50 HZ, Single phase AC supply , earthening etc. complete as required .

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 5 A to 32 A rating , 240 /415 V,10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)

6 Module (200mm X75mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A Switch.

15/16 A Switch.

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet.

wiring for circuit / Submain wiring alongwith earth wire with the following sizesof FRLS PVS insulated copper conductor , single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mmm + 1 X 1.5 sq. mm earth wire.

2 X 2.5 sq. mmm + 1 X 2.5 sq. mm earth wire.

2 X 4 sq. mmm + 1 X 4 sq. mm earth wire.

Earthingwith G.I. earth pipe 4.5 metre long, 40 mm dia including acceesssories , and providing masonry enclosure with cover plate havinng locking arrangement and watering pipe etc. with chharcoal/ coke and salt as required.

Supplying and lying 6 SWG G. I. wire at 0.50 metre below ground level for conductor earth electrode, including connnectionn / terminatiion with GI thimblle etc. as equired.

Supplying fitting and fixing of LED aluminium excruded smart bright batten tube light fitting (4ft) as required and as directed by the department.

Supplying fitting & fixing of LED bulb 9W non dimmable in the existing batten / angle holder as required and as directed by the departments (philips or eqvt. Make)

Supplying , installation, testing and commisiion of LED 50 W flood light of LED / MH/ HPSV luminiaries complete with all accessories such as balllast, capacitor , ignitor and driver as requuired complete with necessary suppport / foundation with 2.5 sq. mm PVC insulated S.C . copper conductor as required and as directed by the department, (Havelles/PHILIPS/WIPRO/ BAJAJ/CROMPTON/ HP/ SOLAR/JAQUAR make)

PRSANTA DAS