Installation of semi hymast in ward 17 Shamshan Ghat

Supply & Fixing of 10 mtr Gi Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16 mm thick) having 3mm thickness with single arm bracket (1 Mtr Length) on RCC foundation 1:2:4 including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete (UP PWD Sl No. 2128)

Supply and Fixing of M.S. angle frame suitable for 6 no. 170-200 watt led light 6 way complete in old respect (market rate).

Supply and laying of aluminium conductor PVC Insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On Surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer-Incharge 10sq mm x 4 core PWD SOR 2017-18 S.No. 501- (b)+ Labour Charges.

Providing and fixing 25 mm x 5 mm G.I. Stril in 40 mm dia G.I. Pipe from earth electrode including connection with G.I. nut, bolt, spring washer excavation and re- filling etc. as required.

Supply and fixing of plain of pin type copper cable socket (Lug) S.No. 504.

Supply and burring of sale earthing electrode T – 19 Zn- Zinc coated, length up to 2000 mm outer pipe 48.4 mm x 3.2mm, inner pipe 26.9 mm x 2.6 mm, terminal dia. 12 mm, coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 Kgs. activated soil (BFC) capable of reducing the coil resistivity with good mixture of retaining capacity along with 30 cm squarare C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25x3 G.I. step will be extra). Make : as approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18 S.I. No. 725-B.

Supply and Wiring of submains with two nos. of 2.5 sq. mm. FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge. PWD SOR 2014 S.I. No. 289.

Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete 2 output per phase and suitable for single phase supply D.S.R 15.4.2

S/F of Factory wired integral LED Flood light Luminaires with die cast aluminium housing with toughed glass/up stabilized pc cover and lances built with mandatory driver set suitable for 170 to 200 watt Confirming to IP 66 Protection....... Complete in all respect CAT AAA (UPPWD SI No. 23.26) CAT-AAA