Roof Sheet laying at the old building near the new site office premises, Additional Spillway Project, Hirakud

Dismantling and removing 2.5 cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge.

Cement concrete (1:2:4) to M 15 using 12 mm grade hard granite chips including lowering, laying concrete, watering and curing to required time etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work etc.

Brick masonry in cement mortar (1:6) using Fly Ash bricks 25cmx12cmx8cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using in superstructure including hoisting, placing in position, scaffolding splays, cutting circular moulding and curbelling, champering and similar such type of work, watering, curing to required time etc. including cost, conveyance and taxes of all materials and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.

16 mm thick cement plaster (1:6) in finished smooth to inside/outside rough surface of walls after racking out the joints including watering, curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge.

White washing one coat with shell lime over the interior surface of walls and ceiling including cost, conveyance ,taxes of all materials, cost of labour with T & P required for the work complete etc. as per direction of Engineer-in-charge.

Priming one coat with any approved primer on Iron work after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Painting two coats any approved shade of paint on new iron work after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge.

Iron work wrought and put up in trusses and record racks ( labour only )

Fixing G.C.I or A.C. sheet in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc including cost of fittings complete.but excluding cost of G.C.I or A.C. sheet.

Supply of Materials of MS square pipe 75mm x 75mm x 4mm