CERTAIN REPAIRS TO EXTERNAL AND INTERNAL WALL FINISHES AND MISC BR WORKS AT HQ WAC COMPLEX SNCOs MESS SMC OTM ACCN AND SPORTS COMPLEX AND CERTAIN AREA OF AGE BR I UNDER GE AF SUBROTO PARK

Amount

M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (white/ tinted) on walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces complete complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on wall including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces complete all as specified and as directed by Engr-in-Charge.

Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 5mm thick cement mortar (1:3) as in ceiling, soffit of staircase, chhajjas facia etc including cement slurry etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for Oil bound distemper two coats over a coat of primer including preparation of newly plstered surfaces of walls or unplastered surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for three coats of white wash on ceiling ceiling, soffit of staircase, chhajjas facia etc newly plastered surfaces including preparation of newly plastered surfaces or unplastered surfaces complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces/concrete surface of any description over 10 Cm width or girth not otherwise described complete all as specified and directed by Engr-in-Charge.

M&L for staining and varnishing wood and wood based surfaces of any description over 10 cm in width or girth and applying thin varnishing including preperation of old treated surfaces complete all as specified and directed complete all as directed by Engr-in-Charge.

M&L for preparation of old surfaces of walls including corrices (plastered or unplastered surfaces) by scraping down smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, and applying one coats of cement base paint on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old surfaces of walls including corrices (plastered or unplastered surfaces) by scraping down smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, including cornices and applying one coats of exterior weather proof paint on old decorated surfaces all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane/edges using necessary filling compound of putty to obtain smooth/regular/even finish surface with using of sand paper etc and prepare surface , applying two coats of exterior weather proof (coat) paint on plastered/conrete surfaces of walls over a coat of cement base paint primer complete all as specified and as directed by the Engineer-in-Charge.

S&F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 15 mm complete including taking down or up 15 mm steel water tubing and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 20 mm complete including taking down or up 20mm steel water tubing and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair CP stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair CP angle or plain stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair two way angle stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated waste coupling 32mm bore WHB complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and as directed by Engr-in-Charge.

S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair CP Towel rail 450mm long 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engr-in-Charge.

S&F in repair CP soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-Charge.

S&F in repair Corner glass shelf assembly consisting of 5.5 mm thick sheets glass shelf with chromium plated bracket guard and railing complete all as specified and as directed by Engr-in-Charge.

S&F in repair Vitreous china coloured wash down water closet pan two pieces (Couple closet) with 'P' or 'S' trap, Soft close PVC seat cover and twin flushing cistern complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar / Hindware / Parryware

S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. Make : Jaquar / Hindware / Parryware

S&F in repairs Vitreous China urinal half stall type, white complete all as specified and as directed by Engr-in-Charge.

S&F in repairs counter top oval shape ivory coloured wash hand basin of size 56 x 41cm complete all as specified and as directed by Engineer-in-Charge. Make : CNS-WHT-903 of Jaquar or Equivalent of Hindware / Parryware

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge. Make- Commander / Cera / Parryware

S&F in repair Wash down water closet (Pedestal pattern), complete , incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. Make : Jaquar / Hindware / Parryware

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-Charge.

S&F in repairs CP bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed by Engr-in-Charge.

S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron brackets incl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by Engineer-in-Charge. Make : Hindware / Parryware / Jaquar

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No ALD-565 of Jaquar or equivalent in Hindware / Parryware

S&F in repairs mild steel chromium plated grating (round) 125/150mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.

M&L for removing plants/sherbs grown on wall/junctions with roots duly rendering berbicide chemical and making good of the existing brick/concrete surfaces of area n.exc 0.50 Sqm complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for Non-Skid Coloured Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed by the Engineer-in-Charge .

M&L for Screed bed or bedding layer 15 mm thick in CM (1:6) for laying floor finishes/ paths etc., complete all as specified and directed . (Ref item No-14 & 16) complete all as specified and as directed by Engr-in-Charge.

M&L for Glazed Coloured Ceramic tiles in vertical surface 300x200x7mm (or) 350X450X6 to 7 mm thick set and joint in neat cement slury and pointed in white or colour cement to match the colour of the tiles, complete all as specified and as directed by the Engineer-in-Charge .

M&L for Rendering or bedding layer for tiles as in vertical surfaces 15 mm thick in CM (1:4) for laying floor finishes (Ref item No.16) Complete all as specified and as directed by Engr-in-Charge.

M&L for coloured chequered cement concrete tiles 25cm x25cm x22mm thick, set, jointed & pointed in neat cement slurry over complete all as specified and as directed by the Engineer-in-Charge

S&F factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, & joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each, incl removing complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each, incl removing complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebatesincluding joining cleates for fixing etc. complete all as specified and as directed by Engr-in-Charge.

S & F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessar joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aliminium snap beading screws etc. coplete all as specified and as directed by Engr-in-Charge.

Supply and fixing 4.8 mm thick ordianary quality sheet glass exe 0.5 sqm in each pane of glazing with oil putty /beading etc all as specified and directed by Engineer-in-Charge.

M&L prelaminated particle board 12mm thick interior grade prelaminated both side with decorative choice lamination and other side balancing white lamination with screws to timber frame work complete all as specified and directed by Engineer-in-Charge

S&F in Door closer hydraylically regulated Alluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed.(Ref item no.20) complete all as specified and directed by Engineer-in-Charge

S&F in repairs Door clouser hydraylically regulated Alluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed by Engr-in-Charge.

S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face pannels, commercial type on both sides complete all as specifoed and as directed by Engr-in-Charge.

M&L for preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.

S&F Butt hinges of size 100mm length, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type C-21 complete all as specified and as directed by Engr-in-Charge.

S&F Alluminium, anodized, barrel tower bolts extruded section complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed by the Engineer-in-Charge.

S&F Mortice lock as in repairs , fency type, 4 leavers, verticle type, brass body, size 100 mm, all as directed by Engr-in-Charge.

S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square n exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and as directed by the Engineer-in-Charge.

S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and as directed by the Engineer-in-Charge.

S&F 4mm thick figured glass, pin head type & glazing with oil putty/ wooden beading in squares exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and as directed by the Engineer-in-Charge.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Cleaning of water tank of capacity exc 500 ltrs and n. exc 1000 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including disconnecting and refixing complete all as specified and as directed by the Engineer-in-Charge.

Cleaning of water tank of capacity exc 250 ltrs and n. exc 500 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including disconnecting and refixing complete all as specified and as directed by the Engineer-in-Charge.

Dismantling water tanks capacity exc 500 ltrs and n. exc. 1000 ltrs & removing to store complete all as specified and as directed by the Engineer-in-Charge.

Dismantling water tanks capacity exc 250 ltrs and n. exc. 500 ltrs & removing to store complete all as specified and as directed by the Engineer-in-Charge.

S&F 1000 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I. and as directed by the Engineer-in-Charge.

S&F 500 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I. and as directed by the Engineer-in-Charge.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs for PVC cover for suitable for existing rotational moulded polyethylene water storage tanks capacity exc. 250 ltrs and n.exc. 500 ltrs (cylindrical vertical with closed top) complete all as directed by Engr-in- Charge.

S&F in repairs for PVC cover for suitable for existing rotational moulded polyethylene water storage tanks capacity exc. 500 ltrs and n.exc. 1000 ltrs (cylindrical vertical with closed top) complete all as directed by Engr-in- Charge.

S&F in repairs Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and as directed by Engr-in-Charge.

Demolition of concrete of any description and in any position not otherwise specifically provided for completed all as specified and directed by Engr -in-Charge.

M & L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete as directed by Engr-in-Charge.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapple etc wooden/ fillets (15mmx15mm) complete all as specified and directed by Engr-in-charge

S&F in repairs 125mm size aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 150mm size aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 100mm size of butt hinges, medium weight cold rolled mild steel etc complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 125mm size extruded aluminium alloy handles fabricated type complete all as specified and as directed by Engr-in-Charge.

S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directedby Engr-in-Charge

M & L in repairs prelaminated particle board 12mm thick interior grade prelaminated both side with decorative choice lamination and other side balancing white lamination with screws to timber frame work complete all as specified and directedby Engr-in-Charge

M & L in repairs for 35 mm thick Type B0 (1:2:4) (12.50 mm graded aggregate) set in CM (1:4) Providing precast cement concrete louvres and jallies, including all mouldings and reapiring/ finishing/ colouring of disturbed surfaces , complete all as specified and directedby Engr-in-Charge

M&L for Machine coloured pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 80 mm thickness M-40 Grade complete all as specified and directedby Engr-in-Charge

M&L for 75 mm thick Cement concrete type D-2,(1:4:8) (40mm graded aggregate) as in sub floors, sub bases , floors and pavings/ paver blocks etc complete all as specified and directedby Engr-in-Charge

M&L for Fine aggregate (Sand) for cushioning as in interlocking paver blocks laying complete all as specified and directed by Engr-In-Charge.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/board fixed in aluminium door or partition, any thickness, including cover fillets & framed work if necessary complete all as specified and directed by Engr-in-Charge

S & F in repairs 'E' board(Design: LACK & hILL) MAKE: 605x605x4 mm thick, white pre laminated set embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-sectionexposed flanges which shall be power coated white. The frame work shall be comprise of main runner made from 0.33 mm thickgalvanised steel sheet and of size 24 mm X32mmX300 mm board spaced at 120 mm maximum centre to centre, hangers of GI wire4 mm dia to be fixed by approved rawal plug level and fasterners and screws etc.,The last hanger at the end of each main runner shall not be greater than 450 mm from adjecent wall , flushing fitting of 1200 mm longer cross tee(with double stitching) to be interlocked between main runners at 600 mm centre to centre from 1200X600 mm modules cross tee longer than 600 mm to be supported independently . 600mm long cross tee centrally between the 1200 mm cross tee(with double stitching) to be interlocked between main runners at 600 mm centre to centre from 1200X600 mm modules cross Tee longer thyan 600 mm to be supported independently . The perimeter wall angle shall be 0.45 mm thick GS sheet of size 19 mm X 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed by Engr-in-charge

Ashish Sehgal and Co.

M/S MG GROUP

M/S PRADEEP ENTERPRISES