Improvements to Existing Murlon Area at PPT Area in Aerospace Division HAL BC

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Improvements to Existing Murlon Area at PPT Area in Aerospace Division, HAL [BC]. CONTRACT NO. HAL/FMD/C-131/25-26

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part - I [Civil Works]

1 Demolition of reinforced cement concrete work of any description and in any position manually / by mechanical means using pneumatic tools, breaking to pieces of any thickness or volume, including necessary making holes into the walls, if necessary stockpiling and stacking servicable and unservicable materials seperately at designated locations and disposal of demolished / rubbish / unserviceable / dismantled or waste material (Except saleable materials) by mechanical transport outside HAL upto a total lead of 10 kms for all lifts, including cutting reinforcement bars of any description below or above ground level with all required safety measures, etc., all complete as directed by the Engineer-in-Charge. 5.00 Cu m 3180.62 Rupees Three Thousand One Hundred Eighty and Sixty Two Paise Only 15903.10

2 Demolition of existing brick/block masonry work, built in cement mortar manually / by mechanical means of any description at any height and position with requried scaffolding, etc., including stacking of serviceable material and disposal of demolished / unserviceable material (Except saleable materials) outside HAL for a lead upto 10.00 kms for all lifts, etc., all complete as directed by the Engineer-in-Charge. 2.00 Cu m 2465.28 Rupees Two Thousand Four Hundred Sixty Five and Twenty Eight Paise Only 4930.56

3 Demolishing stone rubble masonry built in cement mortar, manually / by mechanical means of any description and at any height including disposal of demolished material, unserviceable material (Except saleable materials) outside HAL upto a lead of 10 km for all lifts and stacking servicable and unservicable materials separately, etc., all complete as directed by the Engineer-in-Charge. 38.00 Cu m 2853.90 Rupees Two Thousand Eight Hundred Fifty Three and Ninety Paise Only 108448.20

4 Demolition of cement concrete of any description & any position / height, breaking to pieces of any thickness or volume including stock piling at designated location and disposal of demolished material (Except saleable materials) outside HAL upto a lead upto 10 km for all lifts and stacking servicable and unservicable materials separately, etc., all complete as directed by the Engineer-in-Charge. 10.00 Cu m 2376.33 Rupees Two Thousand Three Hundred Seventy Six and Thirty Three Paise Only 23763.30

5 Earth work excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soils (exceeding 30cm in depth 1.50m in width as well as 10Sq m on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift, etc., all complete as directed by the Engineer-in-Charge. 60.00 Cu m 172.99 Rupees One Hundred Seventy Two and Ninety Nine Paise Only 10379.40

6 Earth work excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by the Engineer-in-Charge. 40.00 Cu m 253.68 Rupees Two Hundred Fifty Three and Sixty Eight Paise Only 10147.20

7 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation, etc., in layers not exceeding 20cms in depth consolidating each deposited layer by ramming and watering lead upto 50 and for all lift, etc., all complete as directed by the Engineer-in-Charge. 25.00 Cu m 191.02 Rupees One Hundred Ninety One and Two Paise Only 4775.50

8 Supplying & Filling M sand of approved quality & brand to sides of foundation, etc., in layers not exceeding 20cms in depth consolidating each deposited layer by ramming and watering and for all lifts, etc., all complete as directed by the Engineer-in-Charge. 8.00 Cu m 2069.76 Rupees Two Thousand Sixty Nine and Seventy Six Paise Only 16558.08

9 Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading outside HAL or to approved municipal dumping ground or contractors own yard or as approved by Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved, etc., all complete as directed by the Engineer-in-Charge. 60.00 Cu m 257.24 Rupees Two Hundred Fifty Seven and Twenty Four Paise Only 15434.40

10 Supplying, mixing and placing cement concrete (1:4:8) using 40mm graded granite aggregate thickness as required including consolidation, curing, formwork, etc., as per the drawing complete for foundation beds, etc., all complete as directed by the Engineer-in-Charge. 8.00 Cu m 6638.81 Rupees Six Thousand Six Hundred Thirty Eight and Eighty One Paise Only 53110.48

11 Providing and laying in position ready mixed or site batched design mix cement concrete M30 grade with minimum cement content of 350 kg/Cu m for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement, etc., all complete as directed by the Engineer-in-Charge. Note: (i) Reinforcement shall be paid separately. 16.00 Cu m 9410.22 Rupees Nine Thousand Four Hundred Ten and Twenty Two Paise Only 150563.52

12 Supplying and Spreading of 300mm thick soling with broken stone boulders or quarried stone, inter stices filled with M-sand of approved brand and quality, surface formed and rolled and consolidated the soling spread to required level, gradient and alignment, etc., all complete as directed by the Engineer-in-Charge. 4.00 Cu m 1550.96 Rupees One Thousand Five Hundred Fifty and Ninety Six Paise Only 6203.84

13 Providing, Laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub base / base course on well prepared surface and compacting with vibratory hand roller / compactor to achieve the desired density, etc., all complete as directed by the Engineer-in-Charge. 6.00 Cu m 2840.21 Rupees Two Thousand Eight Hundred Forty and Twenty One Paise Only 17041.26

14 Steel reinforcement with Hot Rolled deformed bars for R.C.C work including straightening, cutting, bending, placing in position and binding all complete both above and below plinth level upto required height, etc., all complete as directed by the Engineer-in-Charge. 2500.00 Kgs 105.11 Rupees One Hundred Five and Eleven Paise Only 262775.00

15 Supplying,fabricating and fixing in position MS Builtup columns / trusses / Purlins / Bracings / gantry girders / Catwalk & ladders, etc., in suitable profile indicated in drawing or Stanchions using MS Structurals / tubular such as ISSHS / ISRHS / ISMB / ISA / ISMC / NB / MS Plates / MS Flats, MS foundation bolts, nuts, washers, etc., as per drawing for trusses, purlins, bracings at any height including required scaffolding for base plates, stiffners, bolts, including necessary cutting, welding, alignment of bolts, painting with one coat approved zinc chromate yellow primer after preparation of surface, etc., all complete as directed by the Engineer-in-Charge. 8500.00 Kgs 130.30 Rupees One Hundred Thirty and Thirty Paise Only 1107550.00

16 Centering and Shuttering including strutting, propping etc and removal of form, etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below.

a) For Roof Slab 40.00 Sq m 903.68 Rupees Nine Hundred Three and Sixty Eight Paise Only 36147.20

b) Lintel Beams, Plinth Beams, etc., 25.00 Sq m 717.68 Rupees Seven Hundred Seventeen and Sixty Eight Paise Only 17942.00

17 Providing and laying factory made Precast concrete solid blocks of 200mm thickness of grade M10 made of Normal / C&D waste from approved manufacturer in superstructure above plinth level up to floor V level built in Cement Mortar (1:6) (1 cement : 6 coarse sand), etc., all complete as directed by the Engineer-in-Charge. 40.00 Cu m 9594.36 Rupees Nine Thousand Five Hundred Ninety Four and Thirty Six Paise Only 383774.40

18 Cement mortar (1:6) plastering 15mm thick for brick/concrete surfaces, finished even and smooth with trowel for old & new internal surfaces of walls, with lime rendering, etc., including scaffolding, curing, etc., at all heights, etc., all complete as directed by the Engineer-in-Charge. 150.00 Sq m 385.30 Rupees Three Hundred Eighty Five and Thirty Paise Only 57795.00

19 Cement mortar (1:4) plastering 12mm thick for cement / concrete surface in ceiling, finished even and smooth with lime rendering with necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. 200.00 Sq m 414.73 Rupees Four Hundred Fourteen and Seventy Three Paise Only 82946.00

20 Providing & Fixing G.I Chain link fabric fencing of required width in mesh size [50 x 50]mm, made of GI wire of dia 4mm including strengthening with 2mm dia wire or nuts, bolts & washers, etc as required, etc., all complete as directed by the Engineer-in-Charge. 450.00 Sq m 991.92 Rupees Nine Hundred Ninety One and Ninety Two Paise Only 446364.00

21 Painting with two or more coats of synthetic enamel paint of approved manufacture and colour to give a even shade over steel surfaces including preparation of surface with all required scaffolding, etc., all complete as directed by the Engineer-in-Charge. 250.00 Sq m 220.50 Rupees Two Hundred Twenty and Fifty Paise Only 55125.00

22 Providing and laying Glazed Vitrified Matt / Antiskid tiles in Floor in different sizes approximately [600 x 600]mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kgs/Sq m including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by the Engineer-in-Charge. 160.00 Sq m 1427.61 Rupees One Thousand Four Hundred Twenty Seven and Sixty One Paise Only 228417.60

23 Providing and fixing Ist quality ceramic glazed Wall Tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by the Engineer-in-Charge. 200.00 Sq m 1235.71 Rupees One Thousand Two Hundred Thirty Five and Seventy One Paise Only 247142.00

24 Painting the interior surfaces of walls and ceiling at any height with two coats of Acrylic Emulsion paint of approved shade and manufacture having VOC compliance of less than 50gm/Litre including preparation of previously painted surface by scraping down hardened patches, rubbing down, sand papering, removing greasy spot, stoping holes and crevies to obtain blemish less and dry surface etc., including required scaffolding, etc., all complete as directed by the Engineer-in-Charge. 280.00 Sq m 163.68 Rupees One Hundred Sixty Three and Sixty Eight Paise Only 45830.40

25 Painting over the exterior surfaces of walls, chajjas with two coats of premium Acrylic smooth exterior paint with silicon additives of approved brand, colour, shade, tint, pattern having VOC compliance of less than 50gm/Litre including preparation of surface, applying a coat of alkali resistant primer curing at all heights including necessary scaffolding, formwork, etc., all complete as directed by the Engineer-in-Charge. 350.00 Sq m 189.75 Rupees One Hundred Eighty Nine and Seventy Five Paise Only 66412.50

26 Providing and fixing premium quality white Vitreous china Orissa pattern W.C. pan of Approximate size [580 x 440]mm with integral type foot rests water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, white P.V.C dual flusing prefarably cistern 3 Ltr and 6 Ltr including flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 6595.35 Rupees Six Thousand Five Hundred Ninety Five and Thirty Five Paise Only 26381.40

27 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand / make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket, etc., including making connection with the existing P/S trap, etc., all complete as directed by the Engineer-in-Charge. 6.00 Each 17749.86 Rupees Seventeen Thousand Seven Hundred Forty Nine and Eighty Six Paise Only 106499.16

28 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approximate size [610 x 390 x 370]mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification, etc., all complete as directed by the Engineer-in-Charge. 12.00 Each 7776.34 Rupees Seven Thousand Seven Hundred Seventy Six and Thirty Four Paise Only 93316.08

29 Providing, fixing, testing and commissioning trap ( floor trap ) of approved make with 100mm inlet and 75mm outlet of self cleansing design / S.S floor trap with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge. 16.00 Each 576.36 Rupees Five Hundred Seventy Six and Thirty Six Paise Only 9221.76

30 Providing and fixing Granite Stone of approved shade - [75 x 50]cm deep and 1.80cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) and finished smooth, etc., all complete as directed by the Engineer-in-Charge. 10.00 Sq m 3948.84 Rupees Three Thousand Nine Hundred Forty Eight and Eighty Four Paise Only 39488.40

31 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints, etc., all complete as directed by the Engineer-in-Charge.

a) 15 mm dia 40.00 R m 279.51 Rupees Two Hundred Seventy Nine and Fifty One Paise Only 11180.40

b) 20 mm dia 60.00 R m 326.48 Rupees Three Hundred Twenty Six and Forty Eight Paise Only 19588.80

c) 25 mm dia 60.00 R m 391.34 Rupees Three Hundred Ninety One and Thirty Four Paise Only 23480.40

32 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms, etc., all complete as directed by the Engineer-in-Charge. 10.00 Each 164.07 Rupees One Hundred Sixty Four and Seven Paise Only 1640.70

33 Providing and fixing PTMT towel rod integrated with hanging hook complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. a) For 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms, etc., all complete as directed by the Engineer-in-Charge. 10.00 Each 690.93 Rupees Six Hundred Ninety and Ninety Three Paise Only 6909.30

34 Providing and fixing on wall face unplasticised Rigid Single Socketed PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by the Engineer-in-Charge.

a) 75 mm dia 40.00 R m 242.47 Rupees Two Hundred Forty Two and Forty Seven Paise Only 9698.80

b) 110 mm dia 40.00 R m 367.81 Rupees Three Hundred Sixty Seven and Eighty One Paise Only 14712.40

35 Providing and fixing rectangular high density polyethylene water storage loft tank with cover (500 Ltr Tanks - 6 Nos), conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-Charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately, etc., all complete as directed by the Engineer-in-Charge. 3000.00 Per Litre 10.72 Rupees Ten and Seventy Two Paise Only 32160.00

36 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36kgs to 80kgs and door width from 701mm to 1000mm), with double speed adjustment with necessary accessories and screws, etc., all complete as directed by the Engineer-in-Charge. 12.00 Each 958.15 Rupees Nine Hundred Fifty Eight and Fifteen Paise Only 11497.80

37 Taking out / removing the existing roof treatment / mud phaska including damaged tarfelt, loose plaster, etc., from roof surface of any description at any height within 50m lead and including required scaffolding and preparing the surface by cleaning with brushes and solvent, taking out all dirt, dust, fungus, organic matter including disposal, etc., all complete as directed by the Engineer-in-Charge. 60.00 Cu m 1148.29 Rupees One Thousand One Hundred Forty Eight and Twenty Nine Paise Only 68897.40

38 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sq m by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg / litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints, etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane, etc., all complete as directed by the Engineer-in-Charge. Note : (i) A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 80.00 Sq m 523.79 Rupees Five Hundred Twenty Three and Seventy Nine Paise Only 41903.20

39 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door frames / chowkat of size [50 x 100]mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (Wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750Kgs/Cu m, screw withdrawal strength of 2200N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A ategory with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with M S hold fasts / lugs / SS dash fasteners of required dia and length, etc., all complete as directed by the Engineer-in-Charge. [Note: For WPC solid door / window frames minus 5mm tolerance in dimensons i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made]. 60.00 R m 923.61 Rupees Nine Hundred Twenty Three and Sixty One Paise Only 55416.60

40 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid 35mm thick decorative type flush shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (Wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650Kgs/Cu m and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S Screws, etc., all complete as directed by the Engineer-in-Charge. 26.00 Sq m 5294.73 Rupees Five Thousand Two Hundred Ninety Four and Seventy Three Paise Only 137662.98

41 Taking down existing tiles of Approximate thickness of tiles 10mm to 25mm laid in CM screed of any description and thickness from the existing surfaces of Dado's & Flooring including removal, etc., and stacking material within 50 m lead, etc., all complete as directed by the Engineer-in-Charge. [However, disposal of debris outside at authorised landfill beyond 50m lead will be paid seperately] 95.00 Sq m 71.53 Rupees Seventy One and Fifty Three Paise Only 6795.35

42 Taking down carefully existing sanitary fittings fitted in a toilet block such as Urinals, Wash basin, IWC, EWC flush tank, marble screen wall, plumbing & sanitary lines, etc., and handing over the serviceable materials to Stores / Maintenace Department incl. removal of debris, etc., all complete as directed by the Engineer-in-Charge. (However, disposal of debris outside at authorised landfill will be paid separately). 3.00 Each 130.69 Rupees One Hundred Thirty and Sixty Nine Paise Only 392.07

43 Providing and fixing false ceiling with 15mm thick Tegular edged light weight calcium sliciate false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size [595 x 595]mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per Sq m including both sides)comprising of main-T runners of size [24 x 38]mm of length 3000mm, cross - T of size [24 x 32]mm of length 1200mm and secondary intermediate cross-T of size [24 x 32]mm of length 600mm to formgrid module of size [600 x 600]mm suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sq m) i.e. [12 x 50]mm long dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size [76 x 25 x 25 x 1.60]mm fixed with grid and Z cleat of size [25 x 37 x 25 x 1.60]mm thick with precut hole on both 25mm flange to pierce into [12 x 50]mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing, etc., all complete as directed by the Engineer-in-Charge. 40.00 Sq m 2150.89 Rupees Two Thousand One Hundred Fifty and Eighty Nine Paise Only 86035.60

44 Supplying and fixing PVC-SWR (4 Kg/Sq cm) of approved make incl. all fittings like bends/ door bends, tees, supports, jointing with PVC solutions, etc., all complete as directed by the Engineer-in-Charge.

a) 110 mm dia 180.00 R m 1268.26 Rupees One Thousand Two Hundred Sixty Eight and Twenty Six Paise Only 228286.80

b) 75 mm dia 120.00 R m 679.03 Rupees Six Hundred Seventy Nine and Three Paise Only 81483.60

c) 63 mm dia 60.00 R m 582.55 Rupees Five Hundred Eighty Two and Fifty Five Paise Only 34953.00

45 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete, etc., all complete as directed by the Engineer-in-Charge. (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 5.00 Cu m 9860.37 Rupees Nine Thousand Eight Hundred Sixty and Thirty Seven Paise Only 49301.85

46 Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.60mm thick, 100mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, etc., all complete as directed by the Engineer-in-Charge. 50.00 Sq m 3003.59 Rupees Three Thousand Three and Fifty Nine Paise Only 150179.50

47 Providing and fixing, testing and commissioning 8mm dia C.P. / S.S. Jet (health faucet) with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved with necessary fittings, etc., all complete as directed by the Engineer-in-Charge. 10.00 Each 340.27 Rupees Three Hundred Forty and Twenty Seven Paise Only 3402.70

48 Providing and fixing C.P. brass bib cock of 15mm nominal bore dia and approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 493.92 Rupees Four Hundred Ninety Three and Ninety Two Paise Only 1975.68

49 Providing and fixing White Vitreous China Wash basin of size [630 x 450]mm or nearest available size of approved make with 15mm C.P. brass pillar cock quarter turn type with in-built aerator of approved model & make, C.I. brackets, 32mm C.P. brass waste fitting, 32mm dia semi-rigid PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls, connecting to floor trap and with all necessary fittings and accessories etc. wherever require, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 2271.01 Rupees Two Thousand Two Hundred Seventy One and One Paise Only 9084.04

50 Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85 gms fixed to the health faucet, etc., all complete as directed by the Engineer-in-Charge. 10.00 Each 152.92 Rupees One Hundred Fifty Two and Ninety Two Paise Only 1529.20

51 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge. 55.00 R m 556.43 Rupees Five Hundred Fifty Six and Forty Three Paise Only 30603.65

52 Providing and fixing to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter including of all fittings and fixtures, shutter is of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., conforming to IS: 14856, etc., all complete as directed by the Engineer-in-Charge. 20.00 Sq m 3626.15 Rupees Three Thousand Six Hundred Twenty Six and Fifteen Paise Only 72523.00

53 Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead or handing over to maintenance office, etc., all complete as directed by the Engineer-in-Charge. 500.00 Kgs 3.75 Rupees Three and Seventy Five Paise Only 1875.00

54 Supplying and laying 1.75-2mm thick flexible PVC laminated coloured / design tiles or sheet for flooring of approved make & shade including preparating the surface, cleaning as required and laying with rubber based adhesive as recommended by the PVC tile manufacturer, laying, aligning, cutting in required size and pattern, trimming of tiles, etc., all complete as directed by the Engineer-in-Charge. 40.00 Sq m 1000.00 Rupees One Thousand Only 40000.00

55 Providing and fixing factory made 3 track uPVC glazed / wire mesh windows comprising 2 track glass sliding shutter and one tract for SS mesh made out of of lead free uPVC multi-chambered frame, sash and mullion / coupler (where ever required) extruded profiles having minimum wall thickness of 2mm with frame (98mm & above and upto 112mm) x (40mm & above and upto 44m) both glazed and fly screen sash (30mm above and upto 43mm ) x (55mm above) with zinc alloy (zamak) powder coated handle on every glazed panel white colour and design duly reinforced with galvanized mild steel section made of required shape & size as following CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws, etc., Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water, etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, etc., all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. The rate is including fixing of 5mm clear toughened Glass and SS mesh in the shutters as directed by EIC. 30.00 Sq m 7000.00 Rupees Seven Thousand Only 210000.00

56 Supplying and fixing in position factory insulated sandwich panel for roofing min. 80mm thick core for roofing and cladding with facings made up of pre-painted galvalume, not less than 0.50mm thick (TCT) on top and 0.50mm thick on the bottom with min.280 Mpa yield strength. All exposed surfaces are protected with masking. The core material shall be made up of rigid polyurethane foam (PUF) conforming to IS 12436 and of density around 40 ± 2 kg/m³ fixed with self tapping screws incuding necessary supplementary fittings like Endcaps, butyl tape, joint fillers, joint laps,flashings making provision for accessories, necessary cutouts / openings, supports for joinery like windows, ventilators, louvers as required etc., all complete as per manufacturer's specification and as directed by the Engineer-in-Charge. Note: (i) The quoted rate shall be inclusive of overlaps and wastages. (iii) A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 05 years from the date of completion of contract / project as a whole. 100.00 Sq m 2280.00 Rupees Two Thousand Two Hundred Eighty Only 228000.00

57 Supply & Installation of Fire Hydrant System - The work involves Realignment of External Fire Hydrant System including minor repairs. The scope of the work comprises of the following:- 1. Dismantling of the existing 100mm dia pipes of Approx. qty of 130m. 2. Re-Erection of 100mm dia pipes of Approx. qty of 130m. 3. Supply of 4mm thick wrapping coating of Approx. qty of 11 Sq m. 4. Installation of 4mm thick wrapping coating of Approx. qty of 30m. 5. Supplying & fixing of 100 NB Elbow of Approx. qty of 25 Nos. 6. Supply & fixing of 80 NB Elbow of Approx. qty of 5 Nos. 7. Supply and fixing of MS angle [50 X 50 X 6]mm of Approx. qty 270Kgs. 8. Painting- Lot-1 9. Providing of concrete pedestals - 3 feet above ground and 2 feet under ground- 1' X 1' sectional area Approx. Qty of 35 Nos. 10. G.I "U" Clamps for 100 mm dia pipe Approx.Qty.35 Nos, etc., all complete and making it operational and as per directions of EIC. Note:- The total work to be done in one lot including all miscellaneous items required for re-alignment of the Fire Hydrant Line. The usable materials should be handed over to the HAL. 1.00 Lumpsum 369544.00 Rupees Three Lakh Sixty Nine Thousand Five Hundred Forty Four Only 369544.00

Sub-Total of Part - I [Civil Works] (Excluding GST) Rupees Fifty Seven Lakh Ninety One Thousand One Hundred and Fifty Six Paise Only 5791100.56

Part - II [Electrical Works]

1 Supply and fixing on existing wall/ceiling, testing & commissioning of surface mounting Batten type 20W LED light (four feet) Luminaries with minimum lumens output of 2000 lumens, comprising of Extruded aluminium housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, Other standard accessories including necessary inter-connections, complete in all respects and as directed by engineer-in-chage. The LED batten light shall be of Bajaj BCLAB 20W WH LED P /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 8.00 Each 819.49 Rupees Eight Hundred Nineteen and Forty Nine Paise Only 6555.92

2 Supplying, installation, Testing & commissioning of 36W LED Panel light 2x2 ft., Recessed/surface as per site requirement of Powder coated die cast /Extruded aluminum (Thickness > 1.20mm) body material and construction as per IS:10322 with driver as per the requirement with Driver efficiency>85%, Operating voltage AC 140-270 Volt, freq 50/60 Hz, operating temp range-15 deg to 40 deg centigrade, internal surge protection of 2.5kV with Short circuit & Open circuit protection, THD <10%, P.F.≥0.95, IP20, CRI>80, UGR(unified Glare Rating) < 19, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM(Standard deviation color Matching)<3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufactures word mark/name Engraved/ Embossing/ Screen printing on housing. Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with minimum 5 year OEM warranty. System lumen Efficacy ≥120<135 lm/watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management : heat sink of aluminum housing such that LED junction temperature shall not rise above 90° C) 14.00 Each 2510.17 Rupees Two Thousand Five Hundred Ten and Seventeen Paise Only 35142.38

3 Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 5.00 Each 5081.36 Rupees Five Thousand Eighty One and Thirty Six Paise Only 25406.80

4 Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 4 way (4 + 12), Double door Horizontal MCB DB 2.00 Each 3709.32 Rupees Three Thousand Seven Hundred Nine and Thirty Two Paise Only 7418.64

b) 6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity. 15.00 Each 241.53 Rupees Two Hundred Forty One and Fifty Three Paise Only 3622.95

c) 40-63 amps. ratings, FP MCB, "C" curve, 10 KA breaking capacity. 2.00 Each 1764.41 Rupees One Thousand Seven Hundred Sixty Four and Forty One Paise Only 3528.82

5 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 3 x 2.5 sq. mm (For lighting ckt from DB to Switch box) 150.00 Mtrs 263.56 Rupees Two Hundred Sixty Three and Fifty Six Paise Only 39534.00

b) 3 x 4 sq. mm(For 16A power points & 6A powerpoints) 100.00 Mtrs 316.10 Rupees Three Hundred Sixteen and Ten Paise Only 31610.00

6 Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3.5CX 25 Sqmm size XLPE insulated Aluminium (Al) conductor(stranded) 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)U.G cables and as per technical specification including stacking at site, proper storage complete etc., as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.) 250.00 Mtrs 229.66 Rupees Two Hundred Twenty Nine and Sixty Six Paise Only 57415.00

7 Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 25 sq. mm size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required 4.00 Each 314.41 Rupees Three Hundred Fourteen and Forty One Paise Only 1257.64

8 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, ceiling rose, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 8.00 Pts 1444.07 Rupees One Thousand Four Hundred Forty Four and Seven Paise Only 11552.56

b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 7.00 Pts 2697.46 Rupees Two Thousand Six Hundred Ninety Seven and Forty Six Paise Only 18882.22

c) Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 7.00 Pts 1444.07 Rupees One Thousand Four Hundred Forty Four and Seven Paise Only 10108.49

9 Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 3 pin 2X6A modular socket outlet and 2X6 A modular switch, connections etc., as required. 6.00 Each 923.73 Rupees Nine Hundred Twenty Three and Seventy Three Paise Only 5542.38

10 Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 3.00 Each 558.47 Rupees Five Hundred Fifty Eight and Forty Seven Paise Only 1675.41

11 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil & refilling the same soil and disposal of surplus excavated soil as directed, with in a lead of 50m. 25.00 Cu.Mtrs 527.00 Rupees Five Hundred Twenty Seven Only 13175.00

a) Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 1.00 Set 6489.83 Rupees Six Thousand Four Hundred Eighty Nine and Eighty Three Paise Only 6489.83

b) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 50.00 Mtrs 42.37 Rupees Forty Two and Thirty Seven Paise Only 2118.50

Sub-Total of Part - II [Electrical Works] (Excluding GST) Rupees Two Lakh Eighty One Thousand Thirty Six and Fifty Four Paise Only 281036.54

Sub-Total of Part - I + II [Civil + Electrical Works] (Excluding GST) Rupees Sixty Lakh Seventy Two Thousand One Hundred Thirty Seven and Ten Paise Only 6072137.10

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 6072137.10 BELOW % 6072137.10

Add 18% GST Rupees Ten Lakh Ninety Two Thousand Nine Hundred Eighty Four and Sixty Seven Paise Only 1092984.68

Grand Total (Including GST) Rupees Seventy One Lakh Sixty Five Thousand One Hundred Twenty One and Seventy Seven Paise Only 7165121.78

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-131/25-26

Name of Work: Improvements to Existing Murlon Area at PPT Area in Aerospace Division, HAL [BC].

Estimated Amount in Rs.: 7170000

Tender Notice Date : 03.03.2026

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 2 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2025-26 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2024- 2025 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 2151000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 2868000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II