Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD PIN 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | ₹3.0 L Quoted ₹3.2 L | L1 | Accepted-AOC AOC |
| 2 | L2₹5.5 L+₹2.3 L (69.8%)Rejected-Finance | ₹5.5 L+₹2.3 L (69.8%) | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹6.4 L+₹3.2 L (98.5%)Rejected-Finance | ₹6.4 L+₹3.2 L (98.5%) | L3 | Rejected-Finance Other than lowest bidder |
| 4 | L4₹6.5 L+₹3.3 L (100.5%)Rejected-Finance | ₹6.5 L+₹3.3 L (100.5%) | L4 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | national engineering L1 | BLUE HILL ELECTRICAL AND ELECTRONICS L3 | laxmi enterprises L4 | M/S ARUN ASSOCIATES L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Servicing of diesel engine generator set 125 KVA of make Crompton Greaves & Kirloskar coupled with alternator Engine by carrying out inspection/checking of cylinder head assembly, piston system, piping system,cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket, tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achieve the requisite satisfactory performance at Sec-52. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only. | 2 | Job | 6,500 ₹13,000 | 13,800 ₹27,600 | 1,000 ₹2,000 Lowest | 10,000 ₹20,000 |
| 2.00 | Servicing of diesel engine generator set 200 KVA of make Greaves Cotton and Cummins coupled with alternator Engine by carrying out inspection/checking of cylinder head assembly, piston system, piping system,cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket, tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achieve the requisite satisfactory performance at Sec-62. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only. | 1 | Job | 10,500 ₹10,500 | 14,990 ₹14,990 | 1,000 ₹1,000 Lowest | 12,500 ₹12,500 |
| 3.00 | Servicing of diesel engine generator set 62.5 KVA of make Kirloskar Engine by carrying out inspection/ checking of cylinder head assembly, piston system, piping system, cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, fan belts, dynamo belts, water pump belts, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket,tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achive the requisite satisfactory performance at Sec-23. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only. | 1 | Job | 5,000 ₹5,000 | 12,400 ₹12,400 | 1,000 ₹1,000 Lowest | 8,000 ₹8,000 |
| 4.00 | Servicing of diesel engine generator set 20 KVA of make Kirloskar Engine by carrying out inspection/ checking of cylinder head assembly, piston system, piping system, cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, fan belts, dynamo belts, water pump belts, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket,tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achive the requisite satisfactory performance at Sec-23. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only. | 1 | Job | 3,500 ₹3,500 | 9,000 ₹9,000 | 1,000 ₹1,000 Lowest | 3,500 ₹3,500 |
| 5.00 | Servicing of diesel engine generator set 500 KVA of make Greaves Cotton limited and alternator make Stamford by carrying out inspection/ checking of piping system and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, fan belts, dynamo belts, water pump belts, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket, tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achive the requisite satisfactory performance at Sec-62. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only. | 1 | Job | 25,000 ₹25,000 | 18,600 ₹18,600 | 1,000 ₹1,000 Lowest | 15,000 ₹15,000 |
| 6.00 | M&L for complete overhauling of engine by isolating the engines ,Desmantalling and taking down unservicable parts and repair and rplacement unservicable parts DG Set 200 KVA, of make Cummins Make Srl No 25780170 including dis -assembling of operating mechanism / parts, well cleaning, replacing unserviceable parts / assessories, oiling / greasing of moving parts, calibration and resetting of governer and cleaning and callibration of injector nozzle, radiator assembly with cleaning agent, removing of all deposited materials including oiling / greasing of exhaust fan & bearing machining of parts if reqd etc. The work including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode including operational on AMF panel testing commissioning and complete all as directed.
Note:- (i) Spare parts will be measured and paid seperately under respective items Sch A Item no 07
(ii) All T&P reqd for for overhauling or any work will be contractor,s resposbilty
(iii) The work shall be carried out by the authosied agency of OEM
(iv) This includes any electrical component, wiring required for operational on AMF panel | 1 | Each Job | 3,000 ₹3,000 Lowest | 28,000 ₹28,000 | 12,000 ₹12,000 | 25,000 ₹25,000 |
| 7.00Supply only the following spare part of make & size, suitable for DG Set 200 KVA, SL No. 25780170, complete as discribed in item No 06 above complete in all respect & as directed . :- | |||||||
| 7.01 | CYLINDER LINER | 6 | Each | 500 ₹3,000 Lowest | 4,200 ₹25,200 | 2,100 ₹12,600 | 1,500 ₹9,000 |
| 7.02 | BRASS SLEEVE | 12 | Each | 50 ₹600 Lowest | 1,400 ₹16,800 | 100 ₹1,200 | 600 ₹7,200 |
| 7.03 | OIL SEAL (FLYWHEEL SIDE) | 1 | Each | 100 ₹100 Lowest | 900 ₹900 | 1,200 ₹1,200 | 400 ₹400 |
Tender Value
₹6.7 L
EMD Value
₹13,400
Closing Date
14 Nov 2025, 6:00 pmClosed
AGE (I) CG
Sector-62 Noida
REPAIR/MAINT OF DG SETS AND SERVO STABLIZER UPTO 30 KVA AND OTHER LT EQUIPMENT AT SEC-23, SEC, 24, SEC-52, SEC-62 UNDER AGE (I) CG NOIDA
2025_MES_736578_1
AGE I CGN 34 25 26
Open Tender
Electrical and Maintenance Works
Item Rate
AGE (I) Coast Guard Noida
E b (i)
8 documents required · 8 mandatory
₹500
AGE I CG
₹13,400
14 Mar 2026
25 Oct 2025
21 Nov 2025
25 Oct 2025
14 Nov 2025
7 Nov 2025
Amount
Servicing of diesel engine generator set 125 KVA of make Crompton Greaves & Kirloskar coupled with alternator Engine by carrying out inspection/checking of cylinder head assembly, piston system, piping system,cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket, tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achieve the requisite satisfactory performance at Sec-52. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only.
Servicing of diesel engine generator set 200 KVA of make Greaves Cotton and Cummins coupled with alternator Engine by carrying out inspection/checking of cylinder head assembly, piston system, piping system,cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket, tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achieve the requisite satisfactory performance at Sec-62. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only.
Servicing of diesel engine generator set 62.5 KVA of make Kirloskar Engine by carrying out inspection/ checking of cylinder head assembly, piston system, piping system, cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, fan belts, dynamo belts, water pump belts, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket,tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achive the requisite satisfactory performance at Sec-23. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only.
Servicing of diesel engine generator set 20 KVA of make Kirloskar Engine by carrying out inspection/ checking of cylinder head assembly, piston system, piping system, cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, fan belts, dynamo belts, water pump belts, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket,tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achive the requisite satisfactory performance at Sec-23. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only.
Servicing of diesel engine generator set 500 KVA of make Greaves Cotton limited and alternator make Stamford by carrying out inspection/ checking of piping system and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, fan belts, dynamo belts, water pump belts, bypass filter, CR element, CR plates, 'O' rings etc and tappet calibration including replacing tapet cover gasket, tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achive the requisite satisfactory performance at Sec-62. complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only.
M&L for complete overhauling of engine by isolating the engines ,Desmantalling and taking down unservicable parts and repair and rplacement unservicable parts DG Set 200 KVA, of make Cummins Make Srl No 25780170 including dis -assembling of operating mechanism / parts, well cleaning, replacing unserviceable parts / assessories, oiling / greasing of moving parts, calibration and resetting of governer and cleaning and callibration of injector nozzle, radiator assembly with cleaning agent, removing of all deposited materials including oiling / greasing of exhaust fan & bearing machining of parts if reqd etc. The work including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode including operational on AMF panel testing commissioning and complete all as directed. Note:- (i) Spare parts will be measured and paid seperately under respective items Sch A Item no 07 (ii) All T&P reqd for for overhauling or any work will be contractor,s resposbilty (iii) The work shall be carried out by the authosied agency of OEM (iv) This includes any electrical component, wiring required for operational on AMF panel
Supply only the following spare part of make & size, suitable for DG Set 200 KVA, SL No. 25780170, complete as discribed in item No 06 above complete in all respect & as directed . :-
CYLINDER LINER
BRASS SLEEVE
OIL SEAL (FLYWHEEL SIDE)
OILSEAL
BRASS SLEEVE CYL HEAD
CYLINDER HEAD SEALING
FUEL INJ. PUMP DRIVE
INJECTOR NOZZEL TD/TBD
OILBATH AIR FILTER 100 ID
WATER PUMP ASSLY
CABLE HARNESS
Taking down unserviceable battery charger and supply and fix new automatic electronic battery charger, 16 Amps, 12/24 Volts including making electric connections and to be housed in AMF panel, complete all as specified and directed. Make:- Maha mai / Span /Vinitech/NHP
Supply and fix 12 Volts, 150 AH, maintenance free battery and connecting to DG set and testing after removing the old unserviceable items complete all as directed. Make:- Amaron/Exide express/AMCO
Supply and fix 12 Volts, 180 AH, maintenance free battery and connecting to DG set and testing after removing the old unserviceable items complete all as directed. Make:- Amaron/Exide express/AMCO
Taking down the unserviceable charging dynamo from DG set of capacity 20 KVA to 125 KVA of any make/model/type and thoroughly checking for carrying out repairs and cleaning with necessary cleaning agent and overhauling, lubricating of the same and replacement of parts such as bearings,bushes, field coil and other minor spares for making the charging dynamo serviceable, reconnecting and fixing back in original position and testing complete all as specified and directed.
Taking down the unserviceable turbo charger assembly after disconnecting the mechanical connections from DG set of capacity 20 KVA to 125 KVA of any make / type, opening and thoroughly checking for carrying out repairs of the turbo charger assembly and replacing the turbo charger repair kit and minor spares as required including calibrating, servicing for making the turbo charger functional and assembling and fixing back the turbo charger assembly to its original position and testing.
Taking down the unserviceable water pump of DG set 200 KVA capacity, servicing and overhauling the water pump including replacing certain spares such as bearing, bushes, gaskets, nuts, bolts and washers etc for making the water pump functional, assembling and fixing back in its original position and testing complete all as specified and directed.
Supply only engine oil of grade 20W 40 for DG sets of any capacity complete all as specified and directed. Make:- Servo super/Castrol/Volvoline.
Drain out the fuel from the fuel tank of DG set 20 KVA to 125 KVA capacity and keeping it in separate container, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank and cleaning the fuel tank both internally and externally by removing all the accumulated dust/sediments, carry out leakage testing of the tank and welding/brazing, and refixing the tank in its original position,replacing the drain plug and PVC pipe protected with flexible pipe,refilling back the drained out fuel into the diesel tank and providing locking arrangement with 01 No Godrej pad lock, complete all as specified and directed
All as per item No.13 above, but of capacity 200 KVA to 500 KVA DG set.
Supply and fix automatic voltage regulator (AVR),415 volts including all spares suitable for existing 20 KVA to 125 KVA DG set and connecting up all electrical connections and testing including removing old unserviceable items, complete all as specified and directed. Make :-Silicon/Stamford/Kirloskar
Supply and fix solenoid switch suitable for existing 200 KVA to 500 KVA DG set, connecting up all electrical/mechanical connections and testing including removing old unserviceable items, complete all as specified and directed. Make:Kirloskar/Cummins
Supply and fix ing repair power contactor MN 45, 45 Amps,415 Volts,50 Hz, complete all as specified and directed.
Supply and fix in repair DC Contactor MNO 40,complete all as specified and directed.
Supply only Digital type electronic auto mains failure controller (AMF)with inbuilt programmer and necessary control wiring, complete all as specified and directed.
Supply and fix ing repair digital type Frequency meter, complete all as specified and directed.
Supply and fix in repair digital type volt meter, complete all as specified and directed.
Supply and fix in repair digital Ampere meter with CTs, complete all as specified and directed.
Supply and fix self starter 24 volts, DC complete with all accessories suitable for existing 200 KVA DG set and including necessary wiring, connections and testing and removing the unserviceable self starter, complete as as specified and directed.
Taking out existing underground defective cable of any type and size from the trenches and from any other locations (including taking out of cable covers, pipes etc) complete all as directed.
Repairs to exhaust piping including cleaning and replacing asbestos rope 6/12 mm or as required at site
Supplying and filiing of coollent and all as specified and directed by Engineer-In-Charge. Make- Castrol/HP/Ind mobil/ TATA
Supplying and filling of distilled water and all as specified and directed by Engineer-In-Charge.
M&L for scraping the peeled oil Paint on DG set of following capacity including alternator, engine and fuel tank, preparing the surfaces, cleaning the dust, dirt and applying the two coat of synthetic enamel paint of approved shade all as directed by Engineer-In-charge.
62.5 KVA, Make-Kirloskar
125 KVA, Make- Crompton Greeves & Kirloskar
200 KVA, Make-Greeves & Cummins
S&F battery lead with brass terminals for 20 to 200 KVA DG set complete, all as specified and directed.
S&F in repair push button start/stop with NONC, all as specified and as directed
S&F in repair starting key switch in three positions, all as specified and as directed
Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 70 sqmm,3.5 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed. Note for item No 38 to 39 :- (i) Excavation & Earth work,sand cushioning, cable cover and protection pipe shall be measured and paid separately. (ii) Make for item No 38 to 39:- Havells/polycab/KEI/Finolex/Fort Gloster/Asian cables (RPG)
All as per item No.38 above but of size 50 sqmm, 3.5 core
Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for paymeny purpose.
Supplying and laying old size bricks common burnt clay building bricks Sub class B Designation 75 complete all as specified and directed.
Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.
Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed.
Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.
Disconnecting electrical connections of Servo voltage stabilizer, capacity 30 KVA, taking all the assembly of voltage stabilizer and removing / repairing the unserviceable parts, reassembling it after repair testing and commissioning the voltage stabilizer of following capacities:- Note:- (i) Spares required for replacement of unserviceable parts shall be measured and paid separately under item of this BOQ of scheldule as supply only and cost shall be deemed to be included in unit rate for this item. (ii) Cost of transportation, loading, unloading from site to workshop & back including its installation, testing & commissioning complete is included in the quoted item rate.
Supply only PCB control card for automatic voltage correction suitable for voltage stabilizer capacity 30 KVA. Complete all as specified and directed.
Supply only carbon bushes for voltage stabilizer of capacity 30 KVA. Complete all as specified and directed.
Supply only servo motor/synchronous motor for voltage stabilizer of capacity 30 KVA. Complete all as specified and directed.
Supply only Cast Iron dimmer gear set for automatic voltage correction for servo voltage stabilizer of capacity 30 KVA. Complete all as specified and directed.
Supply only Servo Dimmer Booster coil for automatic voltage correction suitable for servo stabilizer of capacity 30 KVA. Complete all as specified and directed.
Supply only super enamelled copper conductor winding wire of same guage including necessary insulating materials for servo voltage stabilizer of capacities 30 KVA
Taking down old unserviceable control wiring and replacement of control wiring using suitable gauge copper conductor as per existing winding for stabilizer of capacity 30 KVA complete all as specified and directed.
Supply and fixing in replacement Changover switches with 1 P 2W with centre Off upto 16 Amps complete all as directed . Make :- L & T or equivalent as approved.
Supply and fixing in replacement Digital Temp indicator Square type suitable for Servo Voltage stabilizer complete all as directed
M & L for Preparation of old painted iron surfaces of the Voltage Stabilizer 30 KVA (out side body) up , by scraping old paint surface, cleaning and applying two coats of automotive paint by spray painting including denting and filling with putty complete all as directed by EIC and specified.
M & L for Dismantling of LT cable of Different Sizes,cutting of unservicable lugs ,glands etc and making insulation by insualtion tapes of different color and providing the new lugs and doublle compression type cable Glands etc complete all as specified and directed. Note:- Cable glands and lugs will be measured and paid seperately
Supply only Double compression type brass cable glands of following size cable : Make : Dowell's or equivalent
400 Sqmm 3.5 core
300 Sqmm 3.5 core
120 Sqmm 3.5 core
95 Sqmm 3.5 core
35 Sqmm 3.5 core
25 Sqmm 4 Core
Supply only Aluminium LugsLong barrel type of following size cable : Make : Dowell's or equivalent
400 Sqmm 3.5 core
300 Sqmm 3.5 core
120 Sqmm 3.5 core
95 Sqmm 3.5 core
35 Sqmm 3.5 core
25 Sqmm 4 Core
Labour for cleaning the vegetation / surplus soil around the earth pits upto 1.00 mtr all around the pit , cleaning the chamber of the earth pit, replacing the rusted earthing leads / funnel with mesh etc checking the results of the earthing using earth tester, re-activating the earth pit using suitable measures as required to bring the results within the limits of 1 ohm all as directed by engineer-in charge. NOTE :1) All materials required for re-activation of earthing will be measured and paid separately under respective item of respective item of schedule. 2) The resistance of earth pits to be carried out once in three months. 3) Contractor has to provide details of Earthing cleanng job with users Signature
M/S ARUN ASSOCIATES (BID ID -3474412)
BLUE HILL ELECTRICAL AND ELECTRONICS (BID ID -3474382)
laxmi enterprises (BID ID -3471643)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
tenderdocument.pdf
Tender Documents • 1.05 MB
BOQ_824747.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .