REPAIRS/REPLACEMENT OF PLUMBING/SASNITARY FITTINGS AND CERTAIN B/R WORKS IN MD ACCN ZONE-V UNDER AGE B/R-IV OF GE(S) MEERUT CANTT

Amount

Rectifying the leakage of bib taps, stop cocks, angle valve, pillar taps, shower rose/ health focit/ jet spray including replacement of rubber / PVC washers complete all as specified and directed.

Rectifying the leakage of wall mixers/wash hand basin mixer/sink mixer or any type of mixer including replacement of rubber / PVC washers complete all as specified and directed.

Supply and fix in repair for cast copper alloy legs S type for CP brass mixer (S alphabat shape) suitable as in MAP Accn or wall mixer / sink mixer etc screwed down high pressuere with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix in repair brass spindlle of No 2/3/4 or Die of No 2 or 3/4" for CP pillar tap/ bib taps/ angle cock as in Md Accn complete all as specified and directed.

Supply and fix in repair brass chromium plated extension nipple of size 25 to 50mm for CP bib taps/ angle cock etc complete all as directed by Engr-in- Charge.

Supply and fix in repair CP brass chromium plated Jet spray with suitable flexible pipe to EWC for 15mmm bore with fittings, complete all as specified and directed.

Supply and fix in repair CP brass chromium plated health faucet 1.20 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply and fix in repair toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

Supply and fix in repair CP Soap dish, approximate size 100x70x1mm thick, complete all as specified and directed.

Supply and fix in repair chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed.

Supply and fix in repair 15mm bore dia angle cock/stop valve chromium plated including flange, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair 15mm bore two way bib/ angle cock short body chromium plated cast copper alloy, with crutch or butterfly handle, including flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix in repair 15mm bore pillar tap, long shank, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with of without lettered 'Hot' or ' Cold' with long screwed shanks and fly nuts, complete all as specified and directed.

Supply and fix in repair 15mm concealed stop valve , chromium plated, cast copper alloy, high pressure with handle, screwed end for iron pipe or for union and fixed, complete all as specified & directed.

Supply and fix in repair shower arm brass chromium plated for fixing with 15mm bore pipe 195mm long with bend of 45 degree with flange, complete all as specified and directed.

Supply and fix in repair for CP brass waste fittings, for glazed ware basins, sinks etc with long screw shanks and flynuts, flanges and bedded in red lead cement and other end fixed for 40mm bore pipe, complete all as specified and directed.

Supply and fix in repair wall mixer 15mm bore, chromium plated, fancy type cast copper alloy screwed down high pressure with of without lettered 'Hot' or ' Cold' with long screwed shanks and fly nuts, complete all as specified and directed.

Supply and fix in repair 15mm bore dia single lever sink mixer with swinging spout (Wall mounted model). Chromium plate fancy type cast copper alloy screwed down, complete all as specified and directed.

Supply and fix in repair wash hand basin central hole mixer without pop up waste system, cast copper alloy chromium plated, 15mm bore, fancy type, complete all as specified and directed.

Supply and fix in repair plastic water closet seat cover black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. For EWC/Anglo Indian WC, complete all as specified and directed.

Supply & fix in repair PVC waste pipe 32/40mm bore heavy duty WHB/Sink etc, complete all as specified and directed.

Material & labour for fixing in repair standard kit of PVC internal fitting for low level flushing cistern fixed, complete all as specified & directed.

Supply & fix in repair for 20mm bore PTMT float valve with expoy caoted aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified and directed.

Supply and fix in repair PVC Lid/ cover for water tank of capacity 500 or 1000 ltr, complete all as specified and directed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed , complete all as specified and directed.

Supply and fix 20mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down GI steel tubing and connections complete all as specified and directed.

All as per item No 26 above but 15mm dia of pipe.

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing etc, and making good cutting not exceeding 10 cm girthin brick wall complete all as specified and directed.

Supply and fixing as in repair vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white, with integral footrests & 'P' or 'S' trap including making good the disturbed surfaces and to match with existing complete all as specified and directed.

Supply and fixing as in repair vitreous china wash down water closet pan (pedestal pattern), white fixed with 'P' or 'S' trap including making good the disturbed surfaces to match with existing surface complete all as specified and directed.

Supply and fixing as in repair vitreous china wash down water closet pan (semi-pedestal pattern), white fixed with 'P' or 'S' trap including making good the disturbed surfaces to match with existing surface complete all as specified and directed.

Supply and fixing in repairs PVC valve less duel type syphonic action type flushing cistern low level white with PVC in let ball valve float and handle 10 ltr capacity and connection to pipe including 32mm dia PVC long bend for squat pattern set in PCC 1:2:4 type B1 concrete and making good to floor complete all as specified and directed.

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repairs corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated brass bracket guard and railing complete all as specified and directed.

Supply and fix in repair vitreous china wash basin, white/ivory, flat back, size 550 x 400 mm including fixing acessories like galvanised brackets & rag bolts, 32mm CP waste coupling complete complete all as specified and directed.

Supply and fix in repair CP towel rail brass 20mm dia, 600mm long with bracket CP finish complete all as specified and directed.

Supply and fix in repair, kitchen sink with drainage board made of stainless steel 1.00mm thick with plugs, washer and wastes; including bedding in cement mortar 1:2 and providing cantilever brackets and waste pipe, overall size 940mm x 460mm & bowl size 405mm x 354mm x 178mm, complete al as specified and directed.

Supply and fix as in repair kitchen plate rack of size 900mm x 600mm x 250mm made of stainless steel not less than 0.63 mm thick (SS grade 304) with fixing acessories, complete all as specified.

Supply and fix 1000 Ltrs rotational moulded polyethylene (PVC) water storage tank cylindrical vertical with closed top incl dismantling old unserviceable water tanks & removing complete all as specified and directed.

Supply and fix 500 Ltrs rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top incl dismantling old unserviceable water tanks & removing complete all as specified.

Supply and fix in repair 20mm bore gun-metal valve (quarter turn type) with MS lever handle, suitable for GI tubes, ISI marked, screwed both ends for iron pipe, complete all as specified and directed.

Supply and fix in repair 15mm bore gun-metal valve (quarter turn type) with MS lever handle, suitable for GI tubes, ISI marked, screwed both ends for iron pipe, complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises for minor repairs to floor in patches complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm , in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in CM (1:4) complete all as specified and directed.

All as per item No 45 above but area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm.

All as per item Nos 45.00 above but in-skirting dados etc including rendering in CM (1:4), 10mm thick all as specified and directed.

Material and labour for coloured glazed ceramic tiles, in vertical surfaces 350 x 250 x 7/ 450x350x7mm thick such as dado, skirting set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles incl rendering, 10 mm thick in cm 1:4, on wall surfaces finished even and rough without using extra cement to receive tile complete all as specified and directed.

Taking down cement /terrazo plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material & labour for rendering 15mm thick in CM (1:6) on brick work or concrete surface of wall and finished surface even and smooth complete all as specified and directed.

Materials & labour applying 1mm thick wall putty and two coats of oil bound distemper (OBD) over one coat of primer on walls complete all as specified & directed.

Materials & labour for removal of exisiting treatment and preparation of plastered surface of wall etc and applying 1mm thick wall putty and two coat of oil bound distemper (OBD) complete all as specified & directed.

Taking down chowkhats or frame not exc. 1.5 Sqm each with shutters without taking off shutters from the frame completeall as specified and directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement as shown drawing on page No 156 of SSR 2010 (Part-II).

Supply & fix stainless steel butt hinges 100mm in size fixed with screws or with welding to existing MS frames, ISI marked, complete all as specified.

Materials & labour to wooden/ steel/ FRP doors hinges or welding, drilling out old or screws as required and make it serviceable conditions, complete all as specified & directed.

Supply & fix barrel tower bolts 200mm long of aluminium, anodized extruded section and fixed dia of bolt not less than 12mm, ISI marked, complete all as specified & as directed by Engr-in-Charge.

Supply & fix bow handle aluminium anodized of size 200mm, ISI marked, complete all as specified.

Supply and fix in repair aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing sliding bolts of extruded sections or cast-aluminium alloy ISI marked complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from metal /wooden frames fixed with pin, beading or oil putty.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix figured glass, 3mm thick, pin headed type and glazing with oil putty in squares not exc. 0.5 sqm in each pane, complete all as specified and directed.

Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

jitendra AND Co

AR Enterprises

SHAKTI CONSTRUCTION CO

H.B. Traders

BASANT ENTERPRISES

B.K.construction

M/S AGARWAL CONSTRUCTION CO.