Supply installation of ground mounted MS fabricated cubical type 30 HP motor control panel for High Lift of Padmapukuria W/S scheme under Eastern Mechanical Division, P.H.E, Dte. Dist. 24 Pgs. (N).

Amount

Supply , delivery & storage of ground mounted MS Fabricated by 2mm CRCA thick(SWG-14) 40”x20”x10” Steel enclosure hinged type front door powder coated Motor control center having complete internal wiring by using required size FRPVC insulated copper Flexible wire consisting of following component

Incomer:-

100 Amps 4 poll Copper Busbar -1set

100 Amps FN 100 HRC type Main Switch -2 nos

Analog Volt meter ( 0-500) (Make- AE) -1 no.

Analog Ammeter ( 0-100) (Make- AE) -2 nos

C.T (100/5)-6 nos

SP MCB (10 Amps) -2 nos

Indicator (R/Y/B ) -3 nos.

Outgoing:-

Contactor 3TF 46 (Make- Siemens)-6 nos

Motor production relay (20-40 amp) a overload, phase Failure (Make- Minilac) - 2 nos

OV/UV single phase production rela ALVD 2 (make- Minilac)-2 nos

Start delta Timer (Make- GIC)-2 nos

ON OFF Indicator -4 nos

Push switch with Element (R/G) -4 nos

internal wiring -1 item

Disconnection of all electric connection for downing the old panel, sluice valve none return valve

Supply 10SQ mm copper wire for motor to panel Power connection for pump No 1& 2

installation with testing and commissioning of the Panel with necessary foundation along with necessary accessories in the suitable posion and drawing cable with MS saddle , making all electrical connection including socketing crimping to completethe work as per direction

Supply and delivery 125 mm dia sluice valve (PN-1.0) (Non Rising Type)

(IS-14846)(Make- IVI) as per relevant

Supply and delivery 125 mm dia Non return valve

(PN-1.0) (IS-14846)(Make- IVI) as per relevant

Dismantling joint 14” long Flexible type (MS) (with rubber compressing ring)

5x8 3inch long Nut bolt washer & Rubber packing

Fitting fixing the sluice valve and NRV and dismantling Joint (item no 5,6,7,8)

Supply , delivery & fitting fixing of LEDs as external light source and electronic driver (model –BRPc409, Make- Philips) with suitable dia and length GI pipe arm bracket fixing on wall of p/h with the help of MS clamps properly grouting including making power connection with supply & drawing suitable cu wire and continuous earthing from nearest junction board all complete

Supply and fitting fixing Tube light led (only T/L)

Add: GST @ 18%

Add: LW Cess @ 1%

MAA KALI ENTERPRISE

M/S SANKHABELA