REPAIR AND MAINT OF LT PANELS LT CABLES OH LINES AND ALLIED WORKS AT BAIRAGARH AND REPAIR AND MAINT OF MT VEHICLES AND TP UNDER GE BHOPAL

Amount

REPAIR AND MAINT OF LT PANELS, LT CABLES, OH LINES AND ALLIED WORKS AT BAIRAGARH

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.0m in depth for pole foundation, cable trench, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note:- Compacted/punned thickness shall be measured & paid.

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

Dismantling cross arms, bracings, supports, clamps and back plates from existing poles (other than dismantled poles) and pole structures complete.

Fixing only Cross arms, bracing, supports, clamps and back plate, obtained from demolition with & including new nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

S&F Cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

M&L Earthing complete with GI strip as earth lead and MS galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32 x 6 mm with GI pipe, nuts, bolts and washers complete upto and including test point made out of 40 x 3mm GI flat, PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame including plastering and white wash, charcoal, common salt 15cm at round the earth plate, watering pipe 20mm med grade/galvanized and 40mm dia GI pipe medium grade for GI strip protection with GI funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009. Notes: (i) The unit rate includes for 40mm diam medium grade protection pipe and earth lead upto 7.50 meter. (ii) Any variation in length of earth lead and protection pipe beyond 7.5 m shall be measured & paid seperately separately. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional height of watering pipe, bends, elbow etc shall be deemed to be included in the unit rate.

S&F Earth continuity conductor or main earthing lead of 32 x 6 mm galvanized iron strip, buried in ground or fixed to wall complete all as specified and directed

M&L for painting of steel pole (swan neck type or straight type) up to 9 mtr height with cross arms, clamp of any length and shape for LT overhead line/street light with two coats of aluminium paint after scratching out old paint, cleaning the existing surface rust free, preparation of the surface including marking pole numbers in a 20 cm dia yellow circle with number writing with black synthetic paint & painting strips in alternate from bottom to top with three strips of black synthetic paint & two strips of white fluorescent paint (up to 1.5 mtr height) throughout the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

M&L for Painting the cross arms, clamps etc of LT PCC poles of 9 Mtrs height after preparation of surface, making the surface smooth with two coat of aluminium paint & providing alternative bend of 30 cm width ( 3 black and 2 white) from bottom of pole to 1.5 Mtr Height with two coat painting with synthetic enameled paint , writing of pole numbers in yellow circle 15 cm with black paint on poles complete all as specified and directed.

Supply, spreading and levelling 40 mm size graded crushed coarse aggregate around transformer plinth/four pole and two pole structures all as specified and directed.

Supply, spreading and levelling 20 mm size graded crushed coarse aggregate around transformer plinth/four pole and two pole structures all as specified and directed.

M&L for Maint and cleaning of surrounding area of sub station near LT panels, transformer etc by cutting seasonal grass, bushes etc, by employing skilled mazdoor including using own T&P as required to do the job and taking all precaution while men on working in sub station being dange zone.

Cutting & trimming tree branches along HT/LT over head lines after arranging shut down and by taking all precautions while working on lines, etc including all T & P required for the purpose and removal of rubbish complete all as specified and directed by Engineer-in-Charge. Note:- Number of trees & their branches cut under this item shall be entered in MB with location as “NOT TO BE ABSTRACTED”.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including filling at road cuttings or making pillars for supporting pipe including necessary form work complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings to poles & the like, etc including weathering, slightly rounded or chamfered angles and throating as directed. including necessary form work complete all as specified and directed.

M&L for tightening and re stringing of existing ACSR over head conductor of any size/type on LT over head line with the help of rope/line wise and tighting the conductor to permissiable sag with and including new aluminium tape/aluminium wire complete all as specified and as directed. NOTE:- Each conductor to be measured seperatly

M&L for tightening and re stringing of existing GI wire of any size/type on HT/LT over head line with the help of rope/line wise and tighting the conductor to permissiable sag, as the gaurd wire in two rows complete all as specified and as directed. (Note : Each conductor to be measured seperatly.)

Dismantling of ACSR conductor of any type and size complete all as specified and directed.

S&F aluminium conductor steel reinforced including straining properly on insulators and binding with aluminium binding wire complete all as specified and directed. (Type of new conductors:- weasel/ rabbit/ Mink) Note : Measurements for the purpose of payments shall be made by measuring horinzontal distance between centers of two adjacent poles and adding 3% extra for sag, joints, jumpers etc.)

S&F in replacement Galvanised steel wire 4 mm dia on pole for continuous earth wire with clamping arrangement as per site requirement, complete all as specified and directed.

S&F in replacemnt cradle guard hexagonal/rectangular, fabricated with galvanized steel wire 3.15mm dia complete all as specified and directed.

S&F Steel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC, numbering of poles in 100mm diameter yellow circle with black paint including 15 cm wide alternate black & yellow bands upto 1.5m height from ground level, type 410-SP-31 (9 meter long) including dismantling after disconnecting existing damaged LT PCC or steel poles, any length long and demolition of cement concrete complete. Note - Excavation, earth work and PCC shall be measured and paid separately.

S&F MCCB, 630 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 500-630 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make : L&T (d - sine) Cat No. CM94106OOT1OG or equivelent in Schinder/ Seimens as approved by GE.

S&F MCCB, 400/320 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 250-320 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make : L&T (d - sine) Cat No. CM98403OOQOOG or equivelent in Schinder/ Seimens as approved by GE.

S&F MCCB, 250 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting, with thermal release range 200-250 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make : L&T (d - sine) Cat No. CM92109OOP1OG or equivelent in Schinder/ Seimens as approved by GE.

S&F MCCB, 200 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting, with thermal release range 160-200 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make : L&T (d - sine) Cat No. CM92109OON10G or equivelent in Schinder/ Seimens as approved by GE.

S&F MCCB, 200 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 160-200 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make : L&T (d - sine) Cat No. CM90638OONO or equivelent in Schinder/ Seimens as approved by GE.

S&F MCCB, 160 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting, with thermal release range 125-160 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make L&T (d - sine) Cat No. CM90638OOMO or equivelent in Schinder/ Seimens as approved by GE.

S&F MCCB, 100 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 100-125 Amp including spreader terminals and phase barriers including taking down old unserviciable burnt MCCB, complete all as specified and directed. Make : L&T (d - sine) Cat No. CM90642OOLO or equivelent in Schinder/ Seimens as approved by GE.

S&F On load changeover switch, Open execution type, 4 Pole, 415 Volt, 200 Amp rating, conf to IS : 13947 (Part 3) including Taking down old unserviciable burnt changeover switch complete all as specified and directed. Make : Havells (Model : Euroload four pole change over, Cat Part No. IHCNFOO200) or equivelent in C&S, L&T as approved by GE.

Dismantling of LT insulator of any type any size complete all as specified and directed

S&F Pin type, porcelain, vitreous, white, brown or green insulator, 100mm height, 65 mm diameter for 1100 volts grade including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, complete all as specified and directed.

S&F Shackle type, porcelain, vitreous, white, brown or green insulators 90mm diameter and 75mm height for working pressure 1100 volts including galvanised mild steel strap 31 x 3mm size, washers, 12mm diameter insulator bolts, washers & nuts complete all as specified and directed.

M&L for fixing MS sliding LOCKING door bolt of size not less then 12 mm dia, 250 mm length bolt, stove enameled black with bright bolt with staple plate on LT panel doors (for locking of doors) with min six nuts, bolts and washers including drilling and fixing on site complete all as specified and directed.

S&F Butt hinges, heavy weight, cold rolled mild steel, 100mm size duly welded to doors of LT panel board, etc complete all as specified and directed.

S&F in repairs LED indication lamps (RGY) (set of three) complete all as specified and as directed.

M&L in repair of LT cable straight through joint/ End joint heat shrinkable type complete with jointing material and accessories suitable for XLPE armoured aluminium conductor LT cable of size 16 Sqmm to 35 Sqmm x 3.5 core complete all as specified and directed.

M&L in repair of LT cable straight through joint/End Joint heat shrinkable type complete with jointing material and accessories suitable for XLPE armoured aluminium conductor LT cable of size 50 Sqmm to 95 Sqmm x 3.5 core complete all as specified and directed.

M&L in repair of LT cable straight through joint/ End Joint heat shrinkable type complete with jointing material and accessories suitable for XLPE armoured aluminium conductor LT cable of size 120 Sqmm to 185 Sqmm x 3.5 core complete all as specified and directed.

M&L in repair of LT cable straight through joint/End Joint heat shrinkable type complete with jointing material and accessories suitable for XLPE armoured aluminium conductor LT cable of size 240 Sqmm to 400 Sqmm x 3.5 core complete all as specified and directed.

S&F in repairs LT line PVC spacers (Strip type) for the following complete all as specified and directed:-

Spacers for two wire

Spacers for three wire

Spacers for four wire

Spacers for five wire

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip armoured, heavy duty cable, 1100 volts grade, laid in trenches, passing through pipes/ducts, on walls with shadel, etc including taking out old unserveciable cable, any type with aluminium conductor of size 10 Sqmm nominal cross section x 2 core complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/ KEI]

All as per item No. 50.00 above but Size 16 Sqmm X 4 core complete all as specified and directed.

All as per item No. 50.00 above but Size 25 Sqmm X 3.5 core complete all as specified and directed.

All as per item No. 50.00 above but Size 35 Sqmm X 3.5 core complete all as specified and directed.

All as per item No. 50.00 above but Size 50 Sqmm X 3.5 core complete all as specified and directed.

All as per item No. 50.00 above but Size 95 Sqmm X 3.5 core complete all as specified and directed.

All as per item No. 50.00 above but Size 120 Sqmm X 3.5 core complete all as specified and directed.

All as per item No. 50.00 above but Size 150 Sqmm X 3.5 core complete all as specified and directed.

S&F 40mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed.

S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed.

S&F 80mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed.

S&F 100mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed.

S&F in repairs aluminium lugs of any type for the following complete all as specified and directed:-

M&L for painting of extisting out door LT cubical panel from outer side with two coats of siemens grey paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, complete all as specified and directed. ( Max size of LT cubical panel 1700 X1500 X 250 mm)

M&L for Dismentling of overhead conductor of any size and type from any type of pole and lowering down safely (to avoid conductor to be damaged during tree cutting of tall branches or for replacement of pole) and refixing and tightening and stringing of existing conductor after cutting of tree on pole with the help of rope/line wise and tighting the conductor to permissiable sag with and including new aluminium tape/aluminium wire complete all as specified and as directed. (each conductor to be measured seperatly, tree cutting to be paid seperately under relevent item).

M&L for taking down LT cable any type and size up to 35 Sqmm x 3.5 core layed/hanging in overhead on pole/bldg/tree and relayed in underground with making complete electric onnections complete all as specified and directed. (Note: Excavation, sand and brick will be paid seperatly)

All as per item No. 58.00 above but cable of size 50 Sqmm x 3.5 core to 95 Sqmm x 3.5 core, complete all as specified and directed.

All as per item No. 58.00 above but cable of size 120 Sqmm x 3.5 core to 180 Sqmm x 3.5 core, complete all as specified and directed.

M&L for servicing/repairing of capacitor panel, any type and size upto 75 KVAR for making them functional, removing and cleaning of dusts, checking control wiring and connections, replacement of any damaged control wire, checking o capacitors, tightening of all electrical connections and hardware, checking of metering devices, relays, etc, replacement of defective unserviceable parts to make the panel fuly functional complete all as specified and all as directed by Engineer-in-charge. NOTE:- Spares required shall be paid separately as supply only

Supply only Heavy duty resin filled power capacitor, 440V, 3 phase, 50 Hz, conforming to IS, IP 20 with over pressure disconnector, dielectric -MPP of 15 KVAR complete all as specified and directed. [Make:-Legrand (Apican)/ Shreem / Neptune as approved by GE]

Supply only Heavy duty resin filled power capacitor, 440V, 3 phase, 50 Hz, conforming to IS, IP 20 with over pressure disconnector, dielectric -MPP of 10 KVAR complete all as specified and directed. [Make:-Legrand (Apican)/ Shreem / Neptune as approved by GE]

Supply only Heavy duty resin filled power capacitor, 440V, 3 phase, 50 Hz, conforming to IS, IP 20 with over pressure disconnector, dielectric -MPP of 5 KVAR complete all as specified and directed. [Make:-Legrand (Apican)/ Shreem / Neptune as approved by GE]

Supply only power factor controller of 8 step controller, complete all as specified and directed. (Make : Legrand Cat part No. 415042 or equivelent in Shreem/ Neptune as approved by GE.)

Supply only MCB 4 Pole, 63 Amp, 415 V, 10 KA "C" curve, IP 20, Conf to IS, complete all as specified and directed. (Make : Legrand / Schinder/ seimens as approved by GE.)

Supply only MCB 4 Pole, 40 Amp, 415 V, 10 KA "C" curve, IP 20, Conf to IS complete all as specified and directed. (Make : Legrand / Schinder/ seimens as approved by GE.)

Supply only MCB SP, 6 to 32 Amp, 240 V, 10 KA "C" curve, IP 20, Conf to IS, complete all as specified and directed. (Make : Legrand / Schinder/ seimens as approved by GE.)

Supply only 4 Pole capacitor duty contactor 40 Amp, 230 V, without intergreated auxiliary contact, complete all as specified and directed. (Make : Legrand / Schinder/ seimens as approved by GE.)

Supply only control coil 230 V suitable for 4 Pole contactor, complete all as specified and directed. (Make : Legrand / Schinder/ seimens as approved by GE.)

Supply only add on auxiliary contact block front mounting, 2 NO + 2 NC for 4 Pole contactor 25 Amp, complete all as specified and directed. (Make : Legrand / Schinder/ seimens as approved by GE.)

Supply , fabricating and fixing of LT panel door made up of CRCA sheet min 3.15 mm thick duly painted with powder coated Siemens Grey paint, factory made, door of size suitable for existing LT panel and fixed , welded on site with panel body with havey duty hinges, with locking arrangement complete all as specified and directed.

Cutting of bituminous road/PCC hard standing/road/floor for laying of GI pipe upto 80mm dia (trench not more than 0.3m x 0.3m) for passing of cable including making good the disturbed surfaces all as per existing complete all as specified and directed. Note:-GI pipe shall be measured & paid separately under relevant items of this schedule.

M&L for Painting of 33 KV MRS Bairagarh Power house Chainlink fencing including barber wire , Angle iron, (65 Mtr length X 65 Mtr width & 1.5 Mtrs height approx) including Main gate, after preparation of surface, making the surface smooth and applying two coat of aluminium paint over a coat of red oxide primer from bottom of fencing upto top including white wash of main gate pillar etc complete all as specified and directed.

REPAIR AND MAINT OF MT VEHICLES AND T&P AT BAIRAGARH

Comprehensive maint with material and servicing, oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement of coolant, brake oil, steering oil, engine oil, cleaning and maint of radiators and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnement, Change of Wheel Greasing, Greasing of all mechanical moving parts,Checking of the Battery Charging system as per manufacturer recommendation of the following Eicher vehicles complete all as specified and directed. Note : Major repairs & Parts and Engine Oil shall be measured under relevant items and paid seperately.

Vehicel BA.No. 03D-154424E

Vehicel BA.No. 09D-181304A

Vehicel BA.No. 09D-181305N

Comprehensive maint with material and servicing, oiling, tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs fuses, repairing of wiring, replacement of coolant, brake oil, steering oil, engine oil, cleaning and maint of radiators and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnement, Change of Wheel Greasing,Greasing of all mechanical moving parts, Checking of the Battery Charging system as per manufacturer recommendation of the following Tata Mobile/Tata Indigo/Maruti Zypsy/Maruti omni vehicles complete all as specified and directed. Note : Major repairs & Parts and Engine Oil shall be measured under relevant items and paid seperately.

Vehicel BA.No. 09C-085832K

Vehicel BA.No. 07C-082122M

Vehicel BA.No. 09B-103879N

Vehicel BA.No. 99B-68184X

Vehicel BA.No. 11B-111599M

Vehicel BA.No. 20B-135287K

New Tata Mobile Vehicel BA.No. NYA- 02 Nos

Comprehensive maint with material and servicing, oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/Air filters, replacement of bulbs fuses, seat cover replacement, mudguard flab,side mirror,tail lamp fitting, accelelator & clutch wire, chain ,clutch plate etc repairing of wiring, Shock Abserber Oil , engine oil, cleaning and maint of maint of battery with electrolyte solution, distilled water, as per manufacturer recommendation of the following Motor Cycles complete all as specified and directed. Note : Major repairs & Parts and Engine Oil shall be measured under relevant items and paid seperately.

Vehicel BA.No. 09A-061336K ( Make : Royal Enfiled )

Vehicel BA.No. 04A-056211L ( Make : Royal Enfiled )

Vehicel BA.No. 11A-062373K (Hero Honda Spl+ )

Vehicel BA.No. 10A-061838E (Hero Honda Spl +)

Vehicel BA.No. 11A-062376W (Hero Honda Spl +)

Vehicel BA.No. 11A-062375W (Hero Honda Spl +)

Taking down the existing defective Self starter from Tata mobile vehicle and replacement of work out spares like Bendex drive, carbon brush, solinoid coil, Armature including rewinding stator, refixing in same position and testing complete all as specified and directed.

Taking down the existing defective Self starter from Eicher Vehicle and replacement of work out spares like Bendex drive, carbon brush , solinoid coil,Armature including rewinding stator, refixing in same position and testing complete all as specified and directed.

Taking down the existing defective Self starter from Maruti Gypsy and replacement of work out spares like Bendex drive, carbon brush , solinoid coil,Armature including rewinding stator, refixing in same position and testing complete all as specified and directed.

Taking down the existing defective Alternator from Tata Mobile Vehicle and replacement of work out spares like Rotor Coil, Field coil, Rectifier, Electronic regulator with Carbon brush with Holder, refixing in same position and testing complete all as specified and directed.

Taking down the existing defective Alternator from Eicher Vehicle and replacement of work out spares like Rotor Coil, Field coil, Rectifier, Electronic regulator with Carbon brush with Holder, refixing in same position and testing complete all as specified and directed.

Dismantling and taking down Eicher vehicle defective clutch system and repair replacement of worn-out spare and refixing, testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Eicher of original manufacture, complete all as specified and directed. :-

Clutch plate

Pressure plate with springs

clutch cylinder

Sleeve cylinder

Release Bearing

Dismantling and taking down Tata mobile vehicle defective clutch system and repair replacement of worn-out spare and refixing, testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Tata Mobile of original manufacture, complete all as specified and directed. :-

Clutch plate

Pressure plate with springs

Release bearing

Clutch Cylinder

Sleeve Cylinder

Dismantling and taking down Maruti Gypsy vehicle defective clutch system and repair replacement of worn-out spare and refixing, testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Maruti Gypsy of original manufacture, complete all as specified and directed. :-

Clutch plate

Pressure plate with springs

Release bearing

Repair and overhauling of Eicher Vehicle defective shafting system and checking of parts such as propeller shaft, centre bearing, centre bearing clamp & rubber, universal cross, yok teeth and testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Eicher of original manufacture, complete all as specified and directed. :-

Centre bearing

Centre bearing rubber

Universal cross

Yeok & teeth

All as per item No 90.00 above but vehicle Tata Mobile

Supply only the following spare parts of Tata Mobile of original manufacture, complete all as specified and directed. :-

Centre bearing

Centre bearing rubber

Centre bearing clamp

Yeok & teeth

Repair and overhauling of Eicher vehicle defective brake system and checking of parts such as wheel cylinder, master cylinder, wheel brake shoe, wheel brake spring system and testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deemed to be included.

Supply only the following spare parts of Eicher of original manufacture, complete all as specified and directed. :-

Wheel cylinder front right

Wheel cylinder front left

Wheel cylinder rear right

Wheel cylinder rear left

Master cylinder

Brake shoe

Brake shoe spring & locking assembly

Repair and overhauling of Tata Mobile defective brake system and checking of parts such as front disc brake, rear wheel cylinder, master cylinder, rear brake shoe, front disc brake pad, front disc brake caliper assembly, complete brake pipe, rear wheel brake shoe spring & locking assembly and testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Tata Mobile of original manufacture, complete all as specified and directed. :-

Front brake disc

Rear wheel cylinder

Master cylinder assembly

Rear brake shoe

Front disc brake pad

Front disc brake caliper assembly

Rear wheel brake shoe spring & locking assembly

Repair and overhauling of Maruti Gypsy defective brake system and checking of parts such as front disc brake, rear wheel cylinder, master cylinder, rear brake shoe, front disc brake pad, front disc brake caliper assembly, complete brake pipe, rear wheel brake shoe spring & locking assembly and testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Maruti Gypsy of original manufacture, complete all as specified and directed. :-

Front brake Drum

Rear wheel cylinder

Master cylinder assembly

Rear brake shoe

Front brake pad

Rear wheel brake shoe spring & locking assembly

Repair and overhauling of Eicher vehicle defective suspension system and checking of parts such as shock absorber, front spring leaf, centre bolt, front spring leaf hanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin and complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Eicher of original manufacture, complete all as specified and directed. :-

Shock absorber Front/Rear

Shock absorber bush

Centre bolt

Hanger

Hanger bolt TVS

Hanger rear

Hanger Jhula

Shackle pins

Lock pin

Repair and overhauling of Tata Mobile defective suspension system and replacement of the following spare parts as directed. (Spare parts will be paid seperately) and refixing the same and testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Tata Mobile of original manufacture, complete all as specified and directed. :-

Shock absorber bush

Shock absorber

Upper link

Lower link

Ball joint

Hanger

Shackle pin

Centre bolt

UJ Cross

Tie rod end

Repair and overhauling of defective Shock absorber(Front & Rear) of motor cycle(Royal Enfield & Hero Honda) and carry out the repair including replacement of Coil Spring Oil Seal, Rubber Boot etc complete all as specified and directed.

Replacement of floor mat and Mud guard rubber mat of Tata mobile (including all material use for fixing), complete all as specified and directed.

All as per item No 105.00 above but Eicher Vehicle, complete all as specified and directed.

Taking out seat cover of vehicle Tata Mobile and replacement the old one by good quality and refixing the new one to their proper place neatly as directed. (including all material use for fixing.), complete all as specified and directed.

All as per item No 107.00 above but for Eicher, complete all as specified and directed.

Removing wheel complete with tyre and tube, taking out tube repair, puncher of tube of vehicles Tata mobile and refixing properly, complete all as specified and directed.

All as per item No 109.00 above but Eicher Vehicle, complete all as specified and directed.

All as per item No 109.00 above but R/E bullet and hero honda, complete all as specified and directed.

Scrapping out old painted surface of Vehicles Eicher and M&L for one coat of enameled paint over two coats of red oxide primer including repair to minor dents of vehicles, repairs to scratches, minor damage repair by welding and concerned polishing of veh complete all as specified and directed..

Scrapping out old painted surface of Vehicles Tata Mobile/Maruti Gypsy/Maruti Omni and M/L for one coat of enameled paint over two coats of red oxide primer including repair to minor dents of vehicles, repairs to scratches, minor damage repair by welding and concerned polishing of veh complete all as specified and directed.

Dismantling and taking down the gear box of Tata mobile, repair and overhauling including replacement of worn spare parts (spare parts will be measured and paid separately) refixing the same in original position and testing complete all as specified and directed. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Tata Mobile of original manufacture, complete all as specified and directed. :-

Gear liver kit

Synchronizer(1 the to 4th gear)

Gear reverse pinion

Gear pinion Ist, 2nd, 3rd & 4th

Counter

All as per item No 115.00 above but Eicher

Supply only the following spare parts of Eicher of original manufacture, complete all as specified and directed.:-

Gear liver kit

Sechronizer(1 the to 4th gear)

Gear reverse pinion

Gear pinion Ist, 2nd, 3rd & 4th

Counter

Taking down the existing defective injector and fuel injection pump (FIP) for the Tata mobile engine and replacement of work out spares like delivery valves, Nozzles, bearings, fly weight, packing kit, and copper washer kit and recalibration of FIP along with Injector and refixing in same position and testing of full load checking of pressure and checking the solinoid coil complete all as specified and directed.

Taking down the existing defective Carburetor pump for the Maruti Gypsy and replacement of new spares pump like and recalibration of pump along with elctric coil and refixing in same position and testing of full load checking of pressure and checking the solinoid coil complete all as specified and directed.

Supply only coolant

Supply only brake oil.

Supply Onlyl distilled water

Supply Only Gear and Differential Oil

Supply Only Engine Oil 20W 40

Supply only the following spares for vehicle Eicher of original manufacture, complete all as specified and directed.:-

Radiator Hose pipe

Fan belt

Timing belt

Back light Assy

Acceleration cable

Clutch cable

Looking glass

Glass handle inner

Glass machine

Door lock

Door hinge

Head light assembly

Indicator and Parking Light Assy

Supply only the following spares for vehicle Tata mobile of original manufacture, complete all as specified and directed.:-

Radiator Hose pipe

Fan belt

Timing belt

Acceleration cable

Looking glass (mirror)

Glass handle inner

Glass machine

Door lock

Door hinge

Head light assembly

Indicator and parking light Assy

M&L for denting damage portion of vehicle including touching, welding, matching with existing painting with the same color of any vehicle complete all as specefied and as directed.

Disconnecting, removing and dismantling radiator assembly from the following vehicels and descaling the radiator throughly with CTC solution/any other chemical solvent agent as approved by the Engineer-in-pcharge, stopping of leakeage at place to copper cores and tubes by brazing scapping the existing Oil paint, dusting and painting the radiator with enamelled paint etc re-installing and commissioning complete all as specified and directed.

Tata Mobile

Eicher

Gypsy

Tata Indigo

Maruti Omni

Disconecting the existing battery of capacity 12V 70/88 AH from the Vehicle, taking it to battery workshop, draining out the complete unserviceable sulphuric acid from the battery, filling up with new sulphuric acid to the required level, charging the battery, testing the battery for correct specific gravity, bringing back to the location, connecting toVehicle for satisfactory function complete all as specified and directed.

M&L for carry out the Wheel alignment of the Tata Mobile to Authrised centre including Change of the tyre like front left to front right and front right to left or front to rear and rear to front vehicle etc complete all as specefied and as directed directed.

M&L for carry out the Wheel alignment of the Eicher to Authrised centre including Change of the tyre like front left to front right and front right to left or front to rear and rear to front vehicle etc complete all as specefied and as directed directed.

Repair and Overhauling of Clutch and transmission system of Motor cycle Royal Enfield and carry out the repair including replacement of Clutch plate, spring circlips, transmission chain etc complete all as specified and directed.

Repair and Overhauling of Clutch and transmission system of Hero Honda Motor cycle and carry out the repair including replacement of Clurtch plate, spring circlips, transmission chain etc complete all as specified and directed.

Supply and fix Battery 12V 5 Ah complete all as specified and directed. Make: Exide/Kirloskar/AMCO or equivalent as approved by GE.

Supply and fix Battery 12V 2.5 Ah complete all as specified and directed. Make: Exide/Kirloskar/AMCO or equivalent as approved by GE.

Supply and fix Battery 12V 70 Ah complete all as specified and directed. Make: Exide/Kirloskar/AMCO or equivalent as approved by GE.

Supply and fix Battery 12V 88 Ah complete all as specified and directed. Make: Exide/Kirloskar/AMCO or equivalent as approved by GE.

Supply and fix Cover Outer of size 2.75X18 - 48P/4PR with inner tube suitable for Spl+ complete all as specified and directed. Make: Apollo tyre /MRF/Ceat or equivalent as approved by GE.

Supply and fix Cover Outer of size 2.75X18 - 42P/4PR with inner tube suitable for Spl+ complete all as specified and directed. Make: Apollo tyre /MRF/Ceat or equivalent as approved by GE.

Dismantling of existing electric motor (1 phase 230 volt, squirrel case, slip ring/induction motor) form foundation and disconnecting from electrically and mechanically. Taking out the motor from starter strip re-winding by using appropriate supper quality copper winding wire of suitable guage including varnishing and insulation paper all complete of capacity 3 HP electric motor and reconnection after rewinding complete all as specified and directed.

Dismantling of existing electric pressure washing pump (1 phase 230 volt, induction motor) form foundation and disconnecting from electrically and mechanically. Taking out the pressure washing pump and servicing /replacement its internal pressure valve by using appropriate new parts of suitable size including packing insulation paper all complete in serviceable condition of capacity 3 HP complete all as specified and directed.

Maintenance and complete Servicing of following size air compressors by lubricating oil, opening of suction/discharge line filters, loading/unloading system, checking of vee belts as required and all of internal parts of Air Compressor, cleaning of all parts, removing any deposited carbon on channels, cleaning of crank case pump, checking and cleaning of connecting rod, crank shaft bearing, replacement of oil seal, loading/unloading plunger and re-assembling of air compressor after repair and replacement of un serviceable parts with new parts, including over hauling of oil pump assy making suction/discharge connection, fixing to existing new/old serviceable Vee belt to bring the compressor ready position for use, testing on load minimum six hours complete all as specified and directed for following sizes of Air compressor :- Note (Any parts/Spares/items required for repairs shall be measured and paid separately in respective items of Schedule ‘A’ as supply only and fixing charges for the same shall be deemed to be included in the quoted rate). (a) Air Compressor make- ELGI at AGE E/M (MT Sec)

Dismantling of old unserviceable DOL starter (1 phase 230 volt 25 amp) and S&F new DOL starter electrically. all as especified and directed. Make:-L&T or equivalent as approved by GE.

Supply and filling of compressor oil servo 150 at various locations all as specified and directed including taking out old unserviceable compressor oil, complete all as specified and directed.

Supply and fix hard rubber air pipe for compressor air filling of size 15 mm dia including air filling valve complete all as specified and directed.

Supply and fix hard rubber water pipe for washing pressure pump of size 15 mm dia including clamp complete all as specified and directed.

Supply and fix Cover Outer of size 7.00X16, 12 PR with inner tube suitable for Tata Mobile Vehicle complete all as specified and directed. (Make: JK Tyre/ Apollo Tyre/ MRF/Ceat)

Supply only LT insulation Tape Roll (ISI Marked) of size 20 mm width and 20 mtr length in different colour Red, Yellow, Black, Blue complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 99165.00

UMESH ENTERPRISES

RAJPATI CONSTRUCTION

PRAGATI ELECTRICALS AND ELECTRONICS

MODI CORPORATION

M/S Shanti Enterprises

M/s VIKAS TRADERS