REPAIR TO PLUMBING, TILING, PLASTER AND OTHER MISC WORKS INCLUDING PERIODICAL SERVICES AT BAINS ENCLAVE UNDER

Amount

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete removal of debris outside MD land.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-in-Charge.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar complete .

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each .

Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 surface.mixed with Pidi proof LW of Dr Fixit @ 200 ml per 50 kg of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note: Pidi proof LW shall will be measured and paid separately).

M& L for rendering in cement mortar (1:4), 15 mm thick finished even and smooth surface.mixed with Pidi proof LW of Dr Fixit @ 200 ml per 50 kg of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note: Pidi proof LW shall will be measured and paid separately). without using extra cement complete all as specified

Supply only pide proof LW of Dr Fixit

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L for Preparation of New surface of wall and applying two coats of distemper oil bound over chalk whiting priming coat complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Preparation of New Plastered Surfaces and applying two Coats of cement base paint on Walls complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Pressed steel door frame of size 105 x 65mm for doorswith one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified,

M&L preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of primer red oxide primer including preperation of surfacescomplete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for Preparation of Old decorated surface and applying one coat of distemper oil bound on surface of Wall complete all as specified and as directed.

M&L for Preparation of Old decorated surface and applying two coat of distemper oil bound on surface of Wall complete all as specified and as directed.

Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface ,applying wallcare putty for smooth finished of the surface and applying one coat of oil bound distemper all as specified and directed.

M&L for Preparation of Old decorated surface and applying one coat of white wash on Walls complete all as specified and as directed.

M&L for Preparation of Old decorated surface and applying one coat of white wash on Ceiling complete all as specified and as directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L for Preparation of Old painted plastered surfaces and applying Two Coats of cement base paint on Walls complete all as specified and as directed.

Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface and applying Two Coats of acrylic exterior grade oil base emulsion paint (anti fungal) over a coat of primer on Walls complete all as specified and as directed.:- (Any Height of Bldg)

M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

M&L for Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

M&L Cement concrete 1:2:4, type B0 (12.50mm graded stone aggregate) for 25mm thick floor as in sub base for floor tiles

M&L Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6

M&L Glazed ceramic coloured tiles (300x200mm) x 5 to 7mm thick on vertical surfaces such as skirting, dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4.

M&L Glazed ceramic coloured tiles 300mm x 450mm x 6 to 7 mm thick on vertical surfaces such as skirting, dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4.

M&L Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) for 75mm thick floor as in sub base for tiles

M&L for chequered cement concrete tiles of 25cm x 25cm x 20mm thick, glossy finished, with grey cement and pigment over and including 20 mm thick screed ben in cm (1:6), set jointed and pointed in neat cement slurry in floors

M&L for Coloured , glossy finish Machine pressed precast concrete interlocking paver block any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35Grade with grey cement and pigment over and including 25-30mm thick stone dust cushoining.

M&L for providing cement concrete type B-0 (1:2:4) ( using 12.5 mm graded stone aggregate) in coping, mud stops rounded or chamfered on edges

M&L for 75mm thick Cement concrete type C2, (1:3:6) (using 40mm graded aggregate) as in Plinth protection finished the concrete surface even and smooth W/O using extra cement complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 of size 100mm

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section

S&F 150mm long aluminium handles, cast type anodized.

S&F mild steel sliding door bolts liding door bolts plate type 300mm bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 250 & n. exc 500 litres capacity

Dismantling water tanks and removing to store exc 250 & n. exc 500 litres capacity

Dismantling water tanks and removing to store exc 500 & n. exc 1000 litres capacity

Dismantling water tanks and removing to store exc 1000 & n. exc 2000 litres capacity

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 litres capacity.

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity.

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 2000 litres capacity.

S&F in repair 20mm dia Ball valves,of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15 to 25mm to 142 - 455 gms) Maker Prayag

S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed

Dismantling of cast iron/pvc pipes jointed in cement mortar 100/110 mm bore all as specified and directed

Dismantling of cast iron/pvc pipes jointed in cement mortar 75 mm bore all as specified and directed

S&F 100mm cast iron soil,waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors/wall.

All as per above item but except pipe

S&F 75mm cast iron soil,waste and vent pipes in any length with or without ears, with cement joints,laid in trenches or in floors/wall.

All as per above item but except pipe

S&F Cast iron bends any radius bore of 100 mm bore with oval access door all as specified and directed

S&F Cast iron bends any radius bore of 75 mm bore with oval access door all as specified and directed

S&F 100mm cast iron branch piece single(equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches all as specified and directed

S&F 75mm cast iron branch piece single(equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches all as specified and directed

S&F 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

M & L cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) all as specified and directed

Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall l all as spcified.

Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall all as spcified.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified.

S&F in repairs PVC (SWR) Branch pieces , double (double Y )equal or unequal of pipe 110mm bore complete all as spcified.

S&F PVC in repairs (SWR) Branch pieces , double (double Y )equal or unequal of pipe 110mm bore complete all as spcified.

Taking up or down steel tubing and connections 15mm bore

S&F of 15mm steel water tubing, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors.

Taking up or down steel tubing and connections 20mm bore

S&F of 20mm steel water tubing, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for cutting chases for concealed piping in brick/stone wall ,cutting girth exc 10cm but not exc 20cm girth,pinning in,making good to facing where required and pionting in cement mortar 1:3 complete all as specified and directed.

S & F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe.Hindware, cera or Parry ware.

S&F in repair Vitreous china squatting Pan 'Orrisa" Pattern size 580 x 440 mm white with integral foot rest , P or S Trap, and lime concrete bedding complete making good disturb ground.Cera or Parry ware.

S&F in repairs Vitreous china wash hand basin including CP waste coupling ,white flat back ,size 580x450mm including brackets ecluding taps ,wate pipe ,chain and plug and porcelain stopper complete all as specified and directed.Cera or Parry ware.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 600mm long etc complete. Make Cera or Parry ware.

S&F in repairs health faucet CP with connecting PVC pipe 1 Meter long with stand. Make plumber or Prayag

S&F in repair water closet seat cover with plastic water closet seat white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminium device complete all as directed. Make Hindware, cera or Parry ware.

S&F in repairs 15mm Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union. Make Plumber or prayag

S&F in repair CP brass wall mixer for mixing hot & cold water screwed down with provision of over lead shower and cock for iron pipe of 15mm bore complete.Make plumber or Prayag

S&F in repairs Stop valve/Angle stop valve, 15 mm bore, cast copper alloy chromium plated fancy type with long shank and cup concealed type..Make plumber or Prayag.

S&F pillar taps, 15mm bore fancy type, cast copper alloy with capston heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make plumber or Prayag

S&F in repairs Brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair. Make plumber or Prayag

S&F in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 100mm size including fixing to steel pipe or union. Make plumber or Prayag

S&F in repair pillar taps cast copper alloy fancy type with capstan heads,CP screwed down high pressure ,with or without lettered "Hot or Cold "with long screw shanks for 15mm bore of iron pipe complete all as specified and directed.Make plumber or Prayag

S&F in repairs fancy type CP two way bib cock of 15 mm bore complete all as specified and directed . Make plumber or Prayag

Easing and adjusting without taking down of shutter of any description n exc 1 sqm each complete all as specified and directed .

All as per item No. above but exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F in repairs Brass chromium plated corner glass shelf with bracket complete all as specified and directed .Make plumber or Prayag as approved by GE

Hacking out old broken glass (any thicknes, size, quality or desctiption) from metal frame including punching or drillilng out old glazing pins/spring clips and providing and fixing new ones

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square/rectangular n.exc 0.50 sqm in each panes.

S&F 4mm figured glass pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples/beeds.

M&L for brick work in modular size with sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M/S Sunshine Construction

M/s Shree Ganesh Traders

Robin Associates