Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹9.8 L+₹33,041 (3.50%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
24 Nov 2020, 6:00 pmClosed
GE (AF) E/M CHAKERI KANPUR
GE (AF) E/M CHAKERI KANPUR 208008
REPAIR AND COMPREHENSIVE MAINTENANCE OF EOT HOT CRANE IN TECHNICAL AREA UNDER GE AF EM CHAKERI AT AIR FORCE STN CHAKERI KANPUR
2020_MES_387445_2
8424/E8
Open Tender
Civil Works
Item Rate
334 days
GE (AF) E/M CHAKERI KANPUR
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) E/M CHAKERI
₹20,000
9 Dec 2020
3 Nov 2020
30 Nov 2020
3 Nov 2020
24 Nov 2020
10 Nov 2020
Amount
M&L for Quarterly serviceing,cleaning ,overhauling, greasing,oiling cleaning of EOT cranes to maintain smooth operation of the crane complete including replacement of defective parts repair replacement of defective parts complete all as specified and directed for the following capacity :- Crane 0.5 Ton Cap - 07 Nos Note :- (i) Spares shall be measured and paid separately (ii) First quarterly service shall be started from commencement date as mentioned in work order. (iii) The quarterly inspection report to be signed by rep of user as per format in PS and as specified by Engineer-in-Charge. Note: (a) Period for one quarter will be 3 months (total quarter 3). (b) Period of last quarter will be 2 months (total quarter 1).
Crane 1.0 Ton Cap - 11 Nos
Crane 2.0/2.5 Ton Cap - 13 Nos
Crane 3.0 Ton Cap - 01 Nos
Crane 5.0 Ton Cap - 05 Nos
Crane 10.0 Ton Cap - 01 No
M&L for quaterly service,routine maintenance, greasing, oiling, cleaning and repair/replacement of HOT Cranes/Hoist including replacement of defective worn out spare parts, components complete all as specified and directed for the following capacity :- Capacity 0.5 TON - 04 Nos Note :- Spare parts shall be measured and paid separately.
Capacity 2.0 TON - 03 Nos
Capacity 3.0 TON - 02 Nos
Capacity 5 TON -03 Nos
Labour only for taking down gear assembly connected induction motor, servicing, greasing of motors etc complete and dismantling gear box assembly taking out gear and other worn out parts, replacement of worn out parts replacement of gear oil overhauling, oil seal replacement including lathe work as required at site re-assembly, re-fixing the same and testing complete all as specified and directed for the following capacity :- Capacity 0.5/1.0 TON Note :- (i) Spares shall be measured and paid separately. (ii) Cost of trasportation to workshop shall be included in quoted rate.
Capacity 2.0 TON
Capacity 3.0 TON
Capacity 5.0 TON
Capacity 10.0 TON
M&L for disconnecting the electric motor from the cranes transporting to workshop, taking out burnt winding and rewinding the motor with same gauge of super enamelled copper wire of suitable size varnishing, overhauling and complete reassembling to crane connecting and testing and commisionning for capacity upto 1 HP motor complete all as specified and directed.
All as per item No 4 above but for 3 HP –ditto-.
All as per item No 4 above but for 7.5 HP –ditto-.
All as per item No 4 above but for 10 HP –ditto-.
M&L for testing of EOT/HOT cranes with full load and 25% over load all as specified in IS No 301 of 1977 and 3177 of 1977 and writing the date of test and Due on the crane with white enamel paint complete all as specified and directed for the following capacity :- Capacity 0.5 TON Note :- (i) Load will be provided by the Department) Except EP shop the Contractor will be responsible for provision of test load materials in EP shop. (ii) Record of load test to be maintained as per format enclosed with PS and as directed by Engineer-in-Charge.
Capacity 1.0 TON
Capacity 2.0/2.5 TON
Capacity 3.0 TON
Capacity 5.0 TON
Capacity 10.0 TON
M&L for repair of pin type porcelain vitreous white insulator 100mm height 65mm dia suitable for 1100 Volt grade including taking down old broken insulator complete all as specified and directed.
SPARES PARTS Supply only of Spares/Components after approval complete all as specified and directed for the following capacity of Cranes/Hoists :- Crane Capacity 0.5 TON/1 TON Magnetic Coil Make L&T.
Over load relay 0.6 to 1 Amps Make- L&T/Siemens.
TP Contactor 25 Amps,ML 1.5, 110 Volts, Coil 415 Voltage Make – L&T/Seimens
Brake Pads.
Main Cable copper conductor 1.5 Sqmm, 4 Core, 1100 volts grade PVC sheathed Make: Grandlays/national/Havells
Push Button with auxiliary contacts Make – L&T
Limit Switch with two contacts in oil tight die cast aluminium housing Make – Siemens.
Variable frequency drive 3 HP, 415 V for LT motion of crane
MCB 3 Pole 63 Amps 10 KA
Supply only of Spares/Components after approval complete all as specified and directed for the following capacity of Cranes/Hoists :- Crane Capacity 2 TON Carbon Brushes.
Over Load Relay 5 to 10 Amps Make – L&T/Siemens .
Brake Lining.
Steel Wire Rope.
Magnetic Coil.
Clutch Plate and Pin.
Thrust Bearing.
Gear Wheel.
Limit Switch with two contacts in oil tight die cast aluminium housing Make – Siemens.
Roller Bearing.
Clutch Plate.
Push Button with auxiliary contacts.
Push Button Make- L&T
Oil Seal
Cable trolley
Supply only of Spares/Components after approval complete all as specified and directed for the following capacity of Cranes/Hoists :- Crane Capacity 3 TON Oil Seal.
Gasket.
Steel Wire Rope 10 mm dia.
Pedant Push Button .
Carbon Brushes.
Over Load Relay 13 to 21 Amps Make – L&T.
Clutch Plate.
Wheel Bearing Make SKF/NBC.
Trolley Wheel.
Brake Pad.
Pedant Push Button with auxiliary contacts Make – L&T.
Limit Switch with two contacts in oil tight die cast aluminium housing Make – Siemens.
Magnetic Coil.
Supply only of Spares/Components after approval complete all as specified and directed for the following capacity of Cranes/Hoists :- Crane Capacity 5 TON Oil Seal.
Gasket.
Brake Pad.
Brake for LT/CT Coil.
Pendant Push Button .
Clutch plate.
Over Load Relay 13 to 21 Amps Make – L&T/Siemens.
Brake lining.
Limit Switch with two contacts in oil tight die cast aluminium housing Make – Siemens.
Key Switch Make – Siemens.
Gear Box Bearing.
Gear Wheel.
Magnetic Coil
Supply only of Spares/Components after approval complete all as specified and directed for the following capacity of Cranes/Hoists :- Crane Capacity 10 TON Oil Seal
Gasket
Steel Wire Rope.
Pedant Push Button Make – Siemens/L&T.
Pedant Push Button with auxiliary contacts Make – Siemens/L&T.
No Volt Coil 1100 volts Make L&T suitable for contactor ML-4. Make- L&T or equivalent.
Carbon Brushes.
Over Load Relay 42 Amps Make – L&T.
Contactor 110 volts, ML-4, 415 volt 50 Hz Make – L&T/Siemens
Common Spares. Supply only LT Cable, PVC insulated ,PVC sheathed multistranded copper conductor of size 2.5 Sq mm, 4 Core 1100 V complete all as specified and directed.
Supply only LT Cable, PVC insulated ,PVC sheathed multistranded copper conductor of size 2.5 Sq mm, 3 Core 1100 V complete all as specified and directed.
Supply only TP Contactor 415 volt, AC3 40 AMPS 50 Hz 110v coil voltage ML-3 complete all as specified and directed.. Make – L&T/Siemens.
Supply only TP Contactor AC3, 32 Amps, 415v 50Hz 110 Volts coil voltage ML-2 complete all as specified and directed. Make – L&T/Siemens.
Supply only No Volt Coil 110 Volts AC suitable for 40 Amps Contactor complete all as specified and directed. Make-L&T /Siemens.
Supply only Transformer 440/110 Volts complete all as specified and directed..
M & L in repair of MCCB 4 Pole 63 Amps breaking capacity 16 KA including 415v 50Hz fixing/connecting arrangement complete all as specified and directed. Make-L&T/HAVELLS/HPL.
M & L in repair of MCCB 3 Pole capacity 100 Amps, 415v 50Hz breaking capacity 25 KA complete all as specified and directed. Make-L&T/HAVELLS/HPL.
Supply only HRC fuse 32 Amps complete all as specified and directed. Make: L&T/Siemens
Supply only HRC fuse 16 Amps complete all as specified and directed. Make: L&T/Siemens
Supply only HRC fuse 10 Amps Make: L&T/Siemens complete all as specified and directed.
Supply only HRC fuse 2 Amps Make: L&T/Siemens complete all as specified and directed.
Supply only LED indicator Lamp as per sample complete all as specified and directed.
Scraping out complete old paint from 0.5 to 10 Ton EOT/HOT crane and its hoisting Guarder/channel vertical on both side and horizontal Guarder/channel located at various locations/Hanger and spray painting with two coat of synthetic enamel paint of superior quality to the complete system with existing colour as approved complete all as specified and directed.
S & F in repair power contactor ML-4 TP ,415 volt, AC3 70 AMPS 50 Hz 110v coil voltage complete all as specified and directed. Make: L&T/Siemens.
M&L for writing SM/MES No and cap of each crane on a 3mm thick 60cmx60cm size MS sheet and fixed the sheet on wall near the crane by means of rivet/ nut and bolts. Applying two coats of black synthetic enamel paint over a coat of red oxide primer including writing on black surface with flourscent white paint bolded letters complete all as specified and directed. Note: Writting letters figures (Block, Roman,italic or indian) not exceeding 30mm thick.
Supply and filling gear oil to the existing crane complete all as specified and directed.
M&L for MCB C curve 32 Amps 4 Pole 415v 50HZ breaking capacity 10 KA. Make Havells or equivalent in Siemens complete all as specified and directed.
M&L for MCB C curve 63 Amps 4 Pole 415v 50HZ breaking capacity 10 KA. Make Havells or equivalent in Siemens complete all as specified and directed.
M & L repair for current collector for Eot & Hot cranes capacity of 0.5 ton to 10 ton capacity complete all as specified and directed.
Preetpowercontrol
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .