Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹38.6 LAccepted-AOC NINGTHOUKHONG BAZAR BISHNUPUR MANIPUR 795126 | NINGTHOUKHONG | BISHNUPUR | MANIPUR | 795126 | 1st | Accepted-AOC L-1 Bidder | |
| 2 | 2nd₹44.7 L+₹6.0 L (15.6%)Rejected-Finance NINGTHOUKHONG WARD NO 14 BISHNUPUR MANIPUR 795126 | NINGTHOUKHONG | BISHNUPUR | MANIPUR | 795126 | 2nd | Rejected-Finance 2nd lowest | |
| 3 | Not Admitted-Fee/PreQual/Technical NINGTHOUKHONG BISHNUPUR 795126 | NINGTHOUKHONG | BISHNUPUR | MANIPUR | 795126 | - | Not Admitted-Fee/PreQual/Technical Others-Tender Cost, EMD and other supporting documents not submitted. | |
| 4 | Not Admitted-Fee/PreQual/Technical NINGTHOUKHONG GOPINATH LEIKAI W NO 12 BISHNUPUR DISTRICT MANIPUR 795126 | NINGTHOUKHONG | BISHNUPUR | MANIPUR | 795126 | - | Not Admitted-Fee/PreQual/Technical Others-Tender Cost, EMD and other supporting documents not submitted. | |
| 5 | Rejected-Technical | - | Rejected-Technical Non-responsive. |
Tender Value
₹38.7 L
EMD Value
₹77,000
Closing Date
7 May 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
d
Office of the DGM (Civil), PnC Division, NHPC Ltd., Loktak Project, Komkeirap, Manipur-795124
Repair of existing Civil site office and Civil Site Store at Old Colony, Loktak Project.
2024_NHPC_801625_1
NH-LPS-HOP013(12)/2/2024-CD I and III/1035
Open Tender
Civil Works
Works
150 days
NHPC Ltd., Loktak Project
Please refer Tender documents.
7 documents required · 7 mandatory
₹590
NHPC Ltd.
₹77,000
Yes
25 Jun 2024
20 Mar 2024
13 May 2024
20 Mar 2024
7 May 2024
20 Mar 2024
Amount
Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of: CGI Sheet.
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead of sectional area 40 square centimetres and above.
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. b) Hard/Dense Soil. (All kinds of soil)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth level with: Cement mortar 1:6 (1 cement: 6 coarse sand).
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically treated bar.
Reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete: Above Plinth level. Thermo-Mechanically treated bar.
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.
Providing and laying position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate cum 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for (Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 159 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
Supplying and filling in plinth with sandy soil under floors including, cum 762.15 watering, ramming consolidating and dressing complete.
Brick work with 1st class common burnt clay F.P.S. (non-modular) bricks in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand).
Half brick masonry with 1st class common burnt clay F.P.S. (non-modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4 coarse sand).
Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes.
Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with Local best quality Uningthou wood.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self-drilling/ self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with Precoated galvanised iron profile sheets 0.40 mm thick.
Providing and fixing precoated galvanised steel sheet roofing accessories, Zinc coating 120gsm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws or with polymer coated J or L hooks, bolts and nuts and or C.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges Plain (500-600 mm) Precoated galvanised iron profile sheets 0.40 mm thick.
Providing and fixing precoated galvanised steel sheet roofing accessories, Zinc coating 120gsm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws or with polymer coated J or L hooks, bolts and nuts and or C.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Gutter (600 mm over all girth) Precoated galvanised iron profile sheets 0.40 mm thick.
12mm cement plaster of mix 1:4 (1 cement: 4 coarse sand).
Providing wood work in frames of doors, windows, clerestory windows and other frames. wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately Local best quality Tolhao wood.
Providing & fixing paneling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling tor panelled or panelled and glazed shutters 25 mm to 40 mm thick Local best quality Teak wood.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / panelling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately): For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness.
Providing and fixing IS:12817 marked stainless steel butt hinges with steel screws etc. complete 125x64x1.9 mm
Marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 250x10mm.
Providing and fixing ISI marked oxidised M.S. sliding door bolts with screws etc. complete 300x16 mm.
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work.
Finishing walls with water proofing cement paint of required shade. New work (Two or more coats applied @ 3.84 kg/10 sqm).
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25x0.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I.
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture of approved make in alt colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Add EPF @ 3.25%
Add CESS @ 1.00%
Add GST @ 18.00%
M/S RAJKUMAR ROMESH SINGH
stage.html
html • 0.05 MB
technical_842643.pdf
PDF • 0.12 MB
techsummary_842643.pdf
PDF • 0.13 MB
finance_842643.pdf
PDF • 0.05 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_842643.pdf
PDF • 0.04 MB
letterofaward.pdf
PDF • 5.76 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .