Repair/replacement of roofing sheet false ceiling water proofing treatment and welcome maint to certain MD Accn works at RMS Dholpur

Amount

Demolitiion of brick work/stone boulder masonary, built in cement mortar or cement lime mortar including all quions arches,pillars etc but excluding ashlar facings,dressed stone work and precast concrete but exceeding ashlar facingdressed stone work and precast concrete articles complete all as specified.

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6. complete all as specified.

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6.but except stone complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing,of face beds and joints, as specified, of random rubble walling uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm, on lime or sand stones complete all as specified.

Raking out joint of pointing to random rubble or polygonal rubble, un-coursed or brought up to courses built in cement mortar complete all as specified.

M&L for Flush pointing to Random rubble masonry, uncoursed or brought up to courses in cement mortar 1:4 complete all as specified.

M&L for plain cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear sp and other similar bands, plinth courses, string courses,parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered anglesand throating, complete all as specified.

Roughning surfaces of old concrete floor by picking , sweeping , clean and washing down with water to remove dust etc including brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing liquid as per manufactur’s intruction finished even and smooth without using extra cement mixed with water proofing compund complete all as specified. Note : WPC shall be supplied and paid separately

Supply only liquid water proofing compound ISI marked.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.Side over laps shall be 75 mm and the end shall be 100 mm and all overlaps and joints shall be sealed by torch application including applying a coat of cold applied bitumen primer conferming IS:3384 @ 0.40 Kg/Sqm and applying hot blown bitumen spread per 1.2 Kg/sqm complete all as specified.

M&L for cutting grooves in stone walls 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

M&L for providing PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in roof kerbs rounded or chamfered on edges or sloping of roof complete all as specified.

M&L for repairing the edge / corner of Chajja / roof projection of Ground and First Floor and similar work by removing plaster width / girth exc 200 mm but not exceeding 300 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified. Note: Scaffolding and formwork if any required deemed to be included in the rate quoted by contractor complete all as specified.

S&F rotational moulded Polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 40x3mm and necessory fittings and iincl dismantliing existing tank complete all as specified.

S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 40x3mm and necessory fittings and iincl dismantliing existing tank complete all as specified.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Disconnecting existing tanks, exc 250 ltr but not exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) complete all as specified.

Takind down GI tubing of 15 mm dia and connection complete all as specified.

Takind down GI tubing of 20 mm dia and connection complete all as specified.

Cleaning and refixing old steel tubing of 15/20mm and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified.

S&F 15 mm dia galvanized pipes medium grade ISI marked with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified.

S&F 20 mm dia galvanized pipes medium grade ISI marked with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified.

Cutting chases for concealed water tubing or concealed conduit & making good in CM 1:3 of girth exc 10 cm in stone, concrete block or slab wall etc complete all as specified.

S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair Bib taps, cast copper alloy Chromium plated with crutch or butterfly handle, screwed for iron pipe of 15 mm bore or for brass ferrule complete all as specified.

S&F in repair 15 mm bore Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair 15 mm bore Stop valves but fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type (swan neck ),screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

S&F in repair vitreous china wash basin white, oval type or flat back of size 580x 450mm including CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements complete all as specified.

S&F in Repair 10 Liters PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S&F in repair Hand Shower (health faucet) ABS chrome plated with 8mm dia 1.20 meter long flexible tube and wall hook complete all as specified.

S&F Iin repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement complete all as specified.

Dismantling wrought iron or Mild steel work of any description not otherwise provided for complete all as specified.

Supply and fixing mild steel rolled sections such as angles etc. As in main and cross beam, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding dorrs, fixed with angle cleats or other connected plates confirming to grad Fe 290 (Gde E-165) complete all as specified

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding,with and including either hooks,and hinges or steel hanging,door fittings (exclusive of steel sheeting or other covering,running rails and guides) and,hanging; also fastening and,fixing complete all as specified.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete all as specified .

Dismantling of Asbestos cement (corrugated, semi corrugated etc,) sheets in roof coverings etc complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, molding / folding in circular / semicircular of any position and height fixed with self tapping screws complete all as specified.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls Fixed with L-type or J-type or cranked hook boltsetc complete all as specified.

Dismantling of expanded metal any thickness or mesh fixed with steel , wood fillets if any complete all as specified.

S&F welded steel wire fabrics n exc 4Kg per Sqm fitted to steel members complete all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets/plywood, any thickness, including cover fillets complete all as specified.

M&L 12 mm thick designer ceiling tiles of 595mm x595 mm in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified.

S & F in repair 4 mm Plain mild steel wire, galvanised class 3 in detached work such as for mosquito nets, cloth line and fixing to straining bolts, hooks, eyes, etc. including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified (each line of wire to be measured).

S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified.

Taking down cement plaster of any description including racking out joints, hacking for key scrubing down with water etc complete all as specified.

M&L for rendering 15 mm thick on stone masonary surfaces or surfaces other than fair face of brick work or on one side of lathing in cement mortar 1:6, finished even and fair complete all as specified.

M&L rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilling surfaces complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work of walls, finished even and smooth without using extra cement on edges/ Chajjas/Roof projection and simlar courses etc. complete all as specified.

M&L for 1.5 mm thick (in two coats) wall care Putty on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified.

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified.

M & L preparation of newly plastered surfaces and applying three coats of white wash in ceiling complete all as specified.

M&L for 2 coats of cement base painting on newly plastered surfaces of wall incl preparation of surfaces complete all as specified.

M & L Preparation of old plastered or unplastered plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete complete all as specified.

All as per item No 55 here in above but applying one coat of white wash on ceiling complete all as specified .

M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified.

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Vitrified ceramic tiles(Mirror Finish) 10mm thick (square/rectangular) light shade area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

Non skid coloured ceramic tiles area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm (400x400) 7 to 8 mm thick in floor/skirting set in neat cement slurry and pointed with white cement mixed with pigment to match the surface complete all as specified.

Non skid coloured ceramic tiles area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm (600x600) 7 to 8 mm thick joint less in floor/skirting set in neat cement slurry and pointed with white cement mixed with pigment to match the surface complete all as specified.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified.

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick rendering in CM 1:4 complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floor,apron,roofs laid bedded and pointed in any mortar

M&L 20 mm thick Granite (of any type/ any colour) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including and. over 15mm thick screed bed in CM 1:4 complete all as specified.

Machine cut kota stone slab 20-25mm thick in riser of steps,skirting, dado and pillar laid ove cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and over incl 10mm thick plaster in CM 1:4 complete all as specified.

Dismantling of RCC Jali,Stone Jali & Stone Pillar of any description , any thickness complete all as specified.

M&L for 40 mm thick Sikandra stone jali decorative design of approved pattern by GE including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified.

S&F stone pillars (post) of size 100x100 mm including engraving decorative design of approved pattern on two face and dome shape approved by GE , height of each post as per sikandra stone jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified.

M& L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth & applying two coats of synthetic enemel paint over a coat of red orideprimer complete all as specified.

VASUNDHARA AND COMPANY

Rajesh Mishra

m/s shanti consruction co