SPECIAL REPAIR TO BLDG NO P-2 THE LAB BLDG UNDER GE(WEST) MATHURA

Amount

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required shall be deemed included in the unit rate quoted by the contrator.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on other than fair faces of brick work or concrete surface in cement mortar (1:6) and finished surface fair and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed. Note : This item will be executed in G+2 floor bldg.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar (1:4) complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of weather coat paint on walls complete all as specified and directed.

M&L for preparartion of new plastered surfaces of walls and applying two coats oil bound distemper over one coat of primer on walls complete all as specified and as directed.

M&L for preparartion of new plastered surfaces of ceiling and applying Three coats of white wash on ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of weather coat paint of dark shade on walls etc complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coats of distemper oil emulsion distemper including appling a coat of wall care putty to acheive smooth finish to walls surface complete all as specified and as directed.

M&L for preparation of old treated surfaces of ceiling including cornices pillars etc and applying one coat of white wash on ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M&L for vitrified ceramic tiles double charged dark shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick rendering in cement mortar (1:4) for skirting / dado finishes complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm bore pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore pipe complete all as specified and as directed.

M&L for 15mm bore of steel tubing galvanized medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20mm bore of steel tubing galvanized medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and as directed..

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 150mm powder coated Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed.

S&F 150mm powder coated Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F powder coated aluminium anodised door with shutter of door frame of section 100x50x1.2mm and section of shutter in top, middle and bottom rail of 90x50x1.2mm and providing 5.50mm thick tinted glass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys in each opening and 01 No hydraluic door spring etc including taking down old Aluminium door shutter with chowkhat complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrengment complete all as specified and directed.

S&F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, side hung shutter type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screw, anodised aluminium fitting such as peg stays 150mm long (1 no), hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed.

M&L for 5.5mm thick black sheet glass ordinary quality glass fixed in aluminum joinery and partitions etc n.exc. 0.5 sqm each pane complete all specified and as directed.

S&F for stainles steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.14 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described not exc 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed.

Dismantling brick/concrete tiles any size etc complete all as specified and directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing the demolished material to a distance exc 250m but n. exc 500m and deposited where directed at a level n.exe 1.5m above starting point complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

S&F precast hydraulically pressed PCC tiles of size 25cm x 25cm x 20mm thick laid over and including screed bed 15mm thick in CM (1:4) set and jointed in neat cement slurry and pointed in CM (1:3) mixed with WPC of approved make in screed bed and pointing on roof complete all as specified and directed.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer @ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets and frame complete all as specified and directed.

S&F GI LAY- in metal ceiling system of 600x 600mm module which includes providing and fixing 'C' walll angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c, suspending the main C carrier of size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm centre with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm (both side inclusive), fixing with clip in tiles into spring T with GI metal ceiling clip in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending complete ass a specified and directed.

S&F GI LAY- in metal ceiling system of 600x 600mm module which includes provides and fixing 'C' walll angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c, suspending the main C carrier of size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm (both side inclusive, fixing with clip in tiles into spring T withGI metal ceiling clip in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation complete ass a specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

S&F in repairs vitreous china flat back urinal with electronic flushing system in snow white and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (Pedestal pattern) in combined cistern with twin flush fittings white including fixing bolt incl plastic water closet seat cover and mild steel chromium plated or aluminized hinging device and jet spray. Complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 X 400mm including waste fitting and brackets but excluding tapes, chain and plug etc complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair of PVC connection pipe 15mm size with nuts, washers of length 450mm pipe complete all as specified and directed.

S&F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed , complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including 15mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F hollow corrugated shape PVC wall lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing and incl beading at sides on PVC frame as per specifications all as specifed complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15cm thick below or above ground level complete all as specified and directed.

Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6mtr mean radius, built in CM (1:6) complete all as specified and directed.

Taking down surface / concealed copper / aluminium point wiring (light,bell,fan,socket or power) complete, including fixtures and fittings such as switches,ceiling roses,lamp holders,pendants,sockets, regulators,tubelight fittings etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and as directed.

M&L for Point wiring complete with 1.5 sqmm single core FRLS PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan/bell point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick Polycarbonate sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLS, PVC insulaed copper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.

M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick polycarbonate sheet cover for mounting switches, socket etc including 4.0 Sqmm FRLS multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.

All as per item No 60.00 (here-in-before) but for one 5 pin socket outlet 5 Amps point controlled by one switch on independent board.

All as per item No 60.00 (here-in-before) but for one 5 pin socket outlet 5 Amps point controlled by one switch on the same board with other switches.

M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick polycarbonate sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLS multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.

S&F socket outlet flush type 3/6 pin suitable for 15 Amp plug top Multipurpose 230 volts all as specified & directed.

S&F socket outlet flush type 5 pin suitable for 5 Amp 230 Volts all as specified and directed.

S&F switch Piano flush type 5 Amp single pole one way 230 volts all as specified & directed.

S&F switch Piano flush type 15 Amp single pole one way 230 volts all as specified & directed.

S&F bell push, flush type 6 Amp 240 volt polycorbonate body complete all as specified and directed.

S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.

S&F call bell ding dong AC 240 volts, single phase complete all as specified and directed.

S&F lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.

S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F decorative 10W mirror light LED environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F LED light 15W (warm white with temp 2700K/3000K) recess mounted pressure die cast aluminium luminaire in powder coated white finish drop down PC diffuser with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver and all other connected accessories complete all as directed.

S&F surface and wall mounted 20 watt LED batten (Warm white with temprature 2700 K/3000K), PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F hum free regulator electronic 5 step type fan regulator 240 volt ISI marked (socket type) including connecting up complete all as specified and directed.

S&F ceiling fans (5 Star rated by Bureau of energy with service value of not less than 8.40) BLDC, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply all as specified and directed

S&F ceiling fans (5 Star rated by Bureau of energy with service value of not less than 7.40) BLDC, (35W±10%) with or without remote, with rated speed 300 Rev per min, air delivery 245 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1400 mm sweep, suitable for single phase supply all as specified and directed

S&F LED recess mounted light luminaires of 36 Watt, 6000K slim panel, IP 40 protection, size (595 x 595 x 11) mm for (armstrong/grid ceiling) dust-free installation with high brightness LEDs for glare-free homogenous illumination with electronic driver and all other connected accessories complete all as directed.

Supply and fixing Geyser 25 ltr capacity in 5 Star rating, digital display, feather touch panel, shock safe plug, incoloy glass coated element, feroglass technology, PUF insulation 0.8 Mpa high working pressure, Whirlflow technology, IPX-4 protection suitable for, 50 Hz, AC 240Volt, single phase supply, white blue with overall length approx 620 mm with wall mounting accessories & 02 Nos flexible pipe connections all as specified and directed.

S&F chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe with long shank and cup (concealed type) 15mm bore complete all as specified and directed.

S&F bib cock 15mm dia cast copper alloy fancy type with crutch of butterfly handle screwed down for iron pipe complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit ISI marked 25 mm dia with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

S&F MCB SP 240 volts, 6-32 Amps, 10KA, B-Series complete all as specified and directed.

S&F MCB SPN 240 volts, 32 Amps 10KA, 'B' series complete all as specified and directed.

S&F in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F factory made sheet metal enclosers distributed board double door three phase 415 volts 8 way for MCCB 160 Amp, 4P as incoming and MCB (TP/SP) as outgoing comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed. Note : (i) The DB shall be VTPN specified makes listed in Appendix 'B'. (ii) The DB Shall be flush fixed and making good the distrubed surface matching with existing specification shall be part of job at no extra cost. (iii) Connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin / bottle type thimble-properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.

S&F in renewal of MCCB 4 pole 160 Amps, 415 volts, 16 KA rupturing capacity with adjustable thermal & magnatic setting complete all as specified and directed.

S&F MCB SPN 240 volts, 40 Amps 10KA, 'C' series complete all as specified and directed.

S&F in repair building security light of 30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed.

S&F in repair sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of 20 Amp all as required at site or directed complete all as specified and directed.

Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ''XLPE'' insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size all as specified. Note: Earth work and other connected work shall be measured & paid sperately.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pierholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft or loose soil complete all as specified and directed.

Returning, filling, in including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning and covering clean and dry sand to underground electric cable in trenches / floor complete all as specified and directed. Note :- Punned thickness shall be measured and paid for.

M&L for bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

S&F GI tubing light grade 50 mm dia along the wall/ in trenches/in duct/ in culvert/ road crossing and including provisioning of sitable mild steel flat iron clams and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

JWALA ELECTRIC CONTRACTORS

Ms Kamal Kant Agarwal

VANI CONSTRUCTION

Ahmed constructions

M/s Hoti Lal Contractor

Deepak Saxena

SHREE RADHIKA CONSTRUCTION