PROVN OF SECURITY LIGHTS IN ASC BN AREA,15 MED REGT AREA, PROVN OF SECURITY LIGHT FOR SASF, PROVN OF SECURITY LIGHTS IN TOWER COLONY IN NORTH AREA AND PROVN OF SEPARATE WATER CONNECTIONS FROM PHED MAIN PUMP HOUSE TO RAJ MAHAL PUMP HOUSE AT NASIRABAD

Amount

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium stranded conductor 1100 volt grade, 10 Sq mm 2 core nominal cross section, complete, all as specified & directed. Note :- Excavation and earth shall be measured separately

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation, laying cables etc not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified & directed..

All as per description of serial item No.2 here-in-before but depth exc 1.5m and not exc 3m.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding of 25 cm thick in soft/loose soil, complete, all as specified and directed

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point, complete, all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading, levelling, watering and consolidation complete, all as specified and directed by Engineer-in-charge. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed by Engineer-in-charge.

M&L for galvanized steel water tubing light grade of 40mm bore with & including all fittings laid in trenches complete all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

S & F Plastic one piece moulding HDPE street light control box with locking arrangement made out of HDPE including 01 No MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar of rating 63 amps for phase and netural on porcelain based insulators and fixing clamps to pole with FI clamp 25 X 3mm for street lights, complete, all as required and directed at site. Make:- Sintex/Hensel/SHI/Brite

Supply & errection in true vertical position of prestressed concrete poles , 9.00 meters long, 102mm x 172mm at top and 102mm x 279 mm at bottom class 10, complete, all as specified and directed. Note :- Excavation and earth shall be measured separately

S&F GI bracket made out of GI pipe, light grade of 40 mm bore and 1.2 m long, cut to length, bend to the required shape including 02 Nos flat iron 40x 6mm clamps and 04 Nos hexagonal bolts of 10mm dia and 100mm long with nuts and washers, complete, all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in foundation of PCC poles/struts including necessary form work, complete, all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in coping around poles, including necessary form work, finishing even and smooth without using extra cement, complete all as specified and directed.

Supply and connecting 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 4 sqmm 2 core for pole box to street light fitting n and including PVC iconduit not less than 20mm dia complete, all as specified and directed.

Supply, fixing and testing energy saving pressure die cast aluminium housing LED type street light luminaire of 60 Watt complete with driver and other accessories complete all as specified and directed by Engineer-in-Charge. Make: Havells, Cat Part No LHETAXU7PN6J060 LED or equivalent from C&S/ Philips/Bajaj/Wipro

M&L for carrying out boring under the black top road for crossing of LT cable/protection pipe by mechanical boring machine or otherwise without damaging black top surface of road for fixing of GI pipe 40 mm bore under the road complete all as specified and directed.

Supply, fixing and testing Street light automatic Nature switch of capacity 5 KW single phase complete with using infrared sensor based NATURE SWITCH for automatic switching of street lights. Nature Switch operation should be based on Nautral Light Lux* level. Required illuminance level for switching ON is ≤ 30 Lux and for swiching OFF ≥ 10 Lux. The sensor should also have part night operation facility of min.4 hrs to max 12 hrs. The sensor along with suitable power contactor(s) and incoming-outgoing MCBs should be enclosed in a pole/wall/panel mountable Rust proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure ( with Hinged LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation(i.e Sensor By-Pass option). Make - Kakatiya Energy system Model SWADEEP-66-5KW 1P or equivalent from Havells .

Supply, installation and testing of 16 meter, high mast conforming to IS-875 (Part - III) - 1987, made out of steel plates conforming to BS - EN10025 cut and folded to form a tapered polygonal section in two section having 20 sides, sectional thickness of botton 4mm & top section 3mm, dia of base section not less than 360mm & top section 150mm in two section suitable for wind speed of 180 Km/hour type double drum , number of ropes 2 for Winch, 3 for Lantern carriage and stainless steel wire rope of grade AISI 316, and consturction 7/19 and 6mm dia breaking Load capacity 2350 Kg and trailing cable copper conductor 5 core, 2.5 sqmm flexible insulatin circuit's per mast is one, including power tools (reversible) 440V, 50Hz, 1HP/1.5HP capacity (motorised system for bringing up and down the lights) and aviation light (LED Type) lightening arrestor spike including feeder pillar made of 3mm thick CRCA sheet suitable for mounting of MCCB, timer, contactor, MCBs LED indication lamp (RYB) for connecting of high mast light fittings and control of motor as per manufacturer design . The mast should consist of 9 X mounting bracket suitable for LED flood light fittings as per manufacturer design including material and labour for excavation and earth work and RCC foundation in any type of soil as per manufacturer instructions / design duly approved by GE and its errection should be carried out under the supervision of manufacturer's representative, complete, all as specified and directed. Make: Crompton; Cat Part No HM-16A-LM-ACC or equivalent from Bajaj as approved by GE Note:- (i) LED Flood light fittings shall be measured and paid separately under relevant of BOQ. (ii) LED flood light and High mast should be of same make.

M&L for cable XLPE insulated screened PVC bedded , galvanised steel strip or wire armoured , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sq mm 4 core LT cable, complete all as specified and directed.

Supply, installation, testing and commissioning of LED flood light with pressure die-cast aluminium housing, IP-66 protection, energy saving, environmental friendly, long life, 180 watt LED fitting with all accessories complete all as specified and directed. Make : Model No BJFL 180W Bajaj LED or equivalent from Havells /Philips as approved by GE

M & L for earthing complete with galvanized steel earth plate electrod 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.50 metre below normal ground level, connected to galvanized strip 32 X 6mm by means of nuts, bolts, check nut and washer of galvanized steel all as shown on electrical plate No 3 of SSR Part - I, including provn of protection pipe 40mm bore light grade GI pipe and 20mm bore medium grade GI pipe as watering pipe, excavation & earth work, PCC pit with 1:2:4 type B1, RCC cover with RCC 1:2:4 type B1 reinforced with XPM, charcoal, salt, funnel etc and connected to LT panel main switch borad, complete, all as specified & directed and testing on completion.

BLANK

Fixing only LED street light luminaries 72 Watt on poleincluding connecting & testing complete all as specified & directed. NOTE:- LED Street light luminaries 72 Watt shall be issued under Schedule 'B' free for fixing only.

S&F PVC insulated sheathed copper conductor cable 2.5 sqmm multi-stranded 1100 volt grade, three core for connecting street light fitting to pole box, complete, all specified and directed.

Supply, laying, connecting, jointing and testingof cast iron pipe of 300 mm bore with spigot and socket ends, centrifugally cast class LA,in any length,including specials laid in trenches complete all as specified and directed.

Supply, installation, connecting and testing of sluice valve of 300mm bore, cast iron body ( long body ), class PN-1.6 with flanged ends drilled, ISI marked having stainless steel spindle with iron wheel at top, complete all as specified and directed.

M & L for construction of valve pit of size 1350 mm x1000 mmx 1200 mm, stone masonry construction complete with mild steel sheet cover 3 mm thick and angle iron frame of size 40 x 40 x 6 mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified and directed. All internal surface and external surface upto 15 cm below normal ground level of stone masonry shall be plastered 15 mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil complete, all as specified and directed .

S&F MS ERW pipe 6 mm thick in new or old direction including special and all fittings (flange , tee , union , nipple, reducer, elbow, etc) and welding work as required at site of size 300 mm bore. IS 3589-1981, complete, all as specified and directed .

Supply, laying,,jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade ,cross section area 10 Sqmm 4 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed. Note :- Excavation and earth shall be measured and paid separately under relevant item of BOQ.

Supply, errecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31), 09 metre long, complete with cast iron base plate, pole cap/final taper plug ,bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole, including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint, complete all as specified and directed.(Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed. Note:- (a) Cost of numbering of pole shall be deemed to included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified & directed.

Supply and connecting 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 4 sqmm 2 core for pole box to street light fitting complete all as specified and directed.

VIPRABANDHU CONSTRUCTIONS

M/s Pankaj Enterprises

M/s SUNIL ENTERPRISES

POONAM ELECTRIC INDUSTRY

PD GUPTA AND COMPANY

kirtiman traders