WELCOME MAINTENANCE AND PERIODICAL SERVICES TO MD AND OTM ACCN OUTSIDE HOSPITAL AREA AT 7 AFH KANPUR CANTT

Amount

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finshed even and smooth without using extra cement and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and directed.

M & L for rendering 10 mm thick in CM (1:6) on other than fair faces of brick work finshed even and smooth without using extra cement and applying two coats of distemper oil emulsion over one coat of alkali resistant primer over and including 1 to 2 mm thick wall care putty complete all as specified and directed.

M & L for rendering 5 mm thick in CM (1:3) on ceilings of concrete surfaces finshed even and smooth without using extra cement and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated surfaces of ceiling, including cornices pilaster etc and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old treated surface of wall including cornices pilaster etc and applying one coat of white wash complete all as specified and directed.

M & L for complete removal of existing surface finish and applying two coats of OBD over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of old treated surfaces of wall including cornices, pilasters etc by washing down and stopping of distemper and painted surfaces of walls and ceiling surfaces and applying one coat of OBD complete all as specified and directed.

M & L for preparation of old treated surfaces of walls including cornices pilaster and soffits of slabs and chajjas etc by scrapping with wire brush and applying one coat of cement based paint complete all as specified and directed.

M & L for removing/cleaning of existing painted surfaces on wall with help of hand held/long hand sander and preparing the surface smooth and filled the cracks upto 3.0 mm with fibre glass reinforced crack filing compound and applying two coats of Apex Ultima paint (or equivalent as approved by GE in Berger/Shalimar/ICI Paint), anti-algai weather proof, 100% acrylic smooth emulsion with silicon additives and high performance exterior wall finish including one coat of exterior primer complete all as specified and directed.

M & L for preparation of old polished wooden surface of any description over 10 cm width or girth and polishing with one or more coat of French polish complete all as specified and directed.

M & L for Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Re-writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and directed.

M & L for painting lines dashes, arrows letters etc on roads, pavement and the like exceeding 10 cm wide with road marking paint white or golden yellow complete all as specified and directed.

Hacking out the old broken glass (any thickness, size, quality or description) from wood/steel frame glazed with oil putty or fixed with beads complete all as specified and directed.

M & L for Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F figured glass 3.0 mm thick, pin headed type and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F figured glass 5.50 mm thick, pin headed type and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs galvanized mild steel wire mesh of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tackles or galvanized wire staples complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan, 'Orissa' pattern of size 580 mm x 440 mm white, with integral foot rests including connection to trap and to flushing pipe, antisyphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs First quality vitreous China wash down water closet pan (pedestal pattern), white, of size not less than 400 mm x 400 mm x 340 mm (excluding fixing bolts, flushing cistern and flush pipe) but including provision of plastic water closet seat, white, closed pattern with flat bottom cover and mild steel chromium plated hinging device complete all as specified and directed.

S & F in repairs vitreous China wash hand basin, white, flat back of size 580 mm x 450 mm excluding taps, waste chain plugs but including waste coupling of 32 mm dia complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe having overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repairs, PTMT Grating doom of 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed.

S & F in repairs chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC flushing cistern of 10 Ltr capacity, valveless syphonic action type, low level, white with inlet valves including brackets and flush pipe complete all as specified and directed.

S&F in repairs 32 mm dia chromium plated brass waste coupling fittings for wash hand basin with long screwed shanks and fly nuts, flange etc complete all as specified and directed.

S&F in repairs 15 mm dia bib tap 15 mm dia fancy type cast copper alloy chromium plated with crutch or butter fly handle screwed down, and screwed for iron pipe complete all as specified and directed.

S & F in repairs CP 15 mm dia pillar tap cast copper alloy fancy type with crutch or chromium plated screwed down high pressure with or without lettered 'hot or cold' with long screwed shanks and fly nuts fixed to iron pipe complete all as specified and directed.

S & F in repairs 15 mm dia stop valves, CP brass fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends complete all as specified and directed.

S & F in repairs 60 mm long tubular towel rail brass chromium plated 20 mm dia complete all as specified and directed.

S & F in repairs 600 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.

S & F in repairs PVC waste pipe fittings, suitable for fixing to WHB and Kitchen sinks complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises of MD land complete all as specified and directed.

M & L for nonskid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved colour and print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles laid over and including screed bed of 15 mm thick in CM (1:6) as in floors complete all as specified and directed.

M & L for 7 to 8 mm thick glazed ceramic tiles of size 300 mmx 200 mm/300 mm x 450 mm of any colour, design, print set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick rendering in CM (1:4) as in dados/skirtings etc complete all as specified and directed.

M & L for 7 to 8 mm thick non skid ceramic coloured joint free tiles square or rectangular of size exceeding 0.18 sqm but not exceeding 0.38 sqm in floors laid over and including 15 mm thick screed bed in CM (1:6), jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size not exc 0.38 sqm as in skirting/dado set over and including 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for 20mm thick granite stone work of any type (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15 mm thick screed bed in CM (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

S & F in repairs 19-20 mm dia Harrison rails of mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rods complete all as specified and directed.

S & F in repairs butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

S & F in repairs butt hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed.

S & F in repairs 250mm long aluminium alloy, anodised, sliding door bolt, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F in repairs 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repairs 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repairs anodised extruded aluminium alloy handles of 150mm size, fabricated type complete all as specified and directed.

S & F in repairs 150 mm long aluminium alloy floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.

S & F in repairs 18/19 mm prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters exceeding 1.0 sqm but not exceeding 2.0 sqm complete all as specified and directed.

Resecuring or easing and adjusting by taking down the shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm and refixing in same opening complete all as specified and directed.

Taking down chowkhat or frame exc 1.0 sqm but not exceeding 2.0 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S & F 30 mm thick (style) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding exc 2.0 sqm each complete all as specified and directed.

S & F 40 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S &F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long aluminium alloy anodized sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and sliding bolts or extruded sections or cast aluminium alloy complete all as specified and directed.

S&F extruded anodised aluminium alloy handles fabricated type of size 150 mm complete all as specified and directed.

S & F in repair 15mm bore GI tube medium grade with all fittings fixed to walls and ceilings or laid in floors of any length complete all as specified and as directed.

S & F in repairs 20mm bore GI tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S & F in repairs 500 ltr capacity PVC water storage tank including 20mm dia PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S & F Continuous (piano) hinges, 30 mm width of flaps of brass, bright finish or electrogalvanised complete all as specified and directed.

S & F PVC bath room mirror cabinet with looking glass mirror of overall size 455mmx355mm of approved colour and pattern complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq. m each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exceeding 1.5 sqm but not exceeding 4 sqm each, complete all as specified and directed.

S & F factory made uPVC white colour sliding window, three track made of extruded profiles having wall thickness 2.3 mm (+-0.2 mm). Window profile with hollow section with multi chamber, frame (88 mm x 52 mm), sliding sash ( 42 mm x 67 mm ), sliding mesh sash (42 mm x 57 mm ), sliding interlock (one vertical length in each shutter) (45.5 mm x 28 mm ), Glazing bead (24.5 mm x 16 mm ) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket of size 1.2 +- 0.2 mm thick galvanized steel frame of size 30 mm x 18 mm- 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profie to be inserted in required profile, frame shall be fixed on wall with 8 mm x 100 mm long fastners. Hardware :- Touch Lock of zinc alloy (white powder coated), steel rollersystem, stainless steel wire cloth of aperture 1.4 mm and required accessories for the following:-

Area not exceeding 2.0 sqm Each

Area exceeding 2.0 sqm Each (Note for Item nos 72.01 & 72.02 :- The unit rate quoted by the contractor excluding cost of glasses and including all other connected accessories. Net opening shall be measured for payment purpose).

S & F in repairs 18 mm thick solid wood grain printed PVC sheet used as in shelf of cupboard / drawer of Kitchen cabinet etc. complet all as specified and directed.

S & F 100 mm long fancy type handle for cup board shutter complete all as specified and directed.

S & F stainless steel basket kit of size 27"x20"x6" for multipurpose basket with sliding rails complete all as specified and directed.

Ditto all as per item No.75.00 above but for multipurpose basaket of size 21"x20"x 6".

S & F in repairs Plain Basket (FOR UTENSILES) SS 304, electroplated and SS wire of size 420 mm x 485 mm x 200 mm including fixing to zinc plated Drawer channels (TDC) of size 20'' with necessary nut & bolts as in modular drawer box fixed below kitchen platform as per manufacturers instruction complete all as specified and directed.

S&F in repairs Thali-Plate Basket (FOR UTENSILES) SS 304, electroplated and SS wire of size 420mm x 485mm x 200 mm including fixing to zinc plated Drawer channels (TDC) of size 20'' with necessary nut & bolts as in modular kitchen fixed below kitchen platform as per manufacturers instruction complete all as specified and directed.

S & F in repairs 40 mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and directed.

S & F in repairs Ball catches with 8mm dia steel ball with brass body and striking plate including letting in complete all as specified and directed.

S & F in repairs Hasp and staple 75mm size safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repairs Locks, cupboard, grade I size 50 mm complete all as specified and directed.

S & F Butt hinges of size 75 mm, cast brass with mild steel hinge pin, bright polished complete all as specified and directed.

S & F 125 mm size extruded aluminium anodised alloy handles, fabricated type complete all as specified and directed.

Demolition of PCC not exceeding 15 cm thickness in floors, roofs or pavings and throwing debris at low lying area not exc 1 km complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in plinth protcetion and courtyard, laid in slope (1:40), finished cement surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 100 mm thick PCC (1:2:4) type B-2, using 40 mm graded stone aggregate as in floors, pavings, spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L for chequered cement concrete tiles of size 300 mm X 300 mm X 25 mm, set and jointed in neat cement slurry with grey cement and pigment over and including 20 mm thick screed bed in CM (1:6) as in Path, complete all as specified and directed.

S & F chromium plated brass health faucet with 1.5 mm thick tube suitable for 15 mm bore pipe for padestal type WC complete all as specified and directed.

M & L for two coat of synthetic enamel paint over a coat of pink primer including preparation of wooden base surfaces of any description over 10 cm width or girth complete all as specified and directed.

M/S MAA TARA TREATMENT PROJECT

ESKEY COMPANY

Khalil Ahmed and Sons