Providing - fixing Sanitary / Plumbing items for Night Shelter for Homeless at Kathua.

Amount

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid ,10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing & Fixing of white vitreous china under counter oval wash basin / circular basin Hindware , Jaquar ,Parko or equivalent with CP brass waste assembly, CP cast brass bottle trap with extension piece 450mm long CP copper connections pipes wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted , nuts, washers, cutting and making good the walls floors.

Providing and fixing CP single liver extended basin mixer ( height 85mm) with out popup waste system with 450mm long Braided Hoses and brass nut with all fittings and accessories as per direction of Engineer-in -charge.

Providing and fixing white vitreous china flat back half stall urinal basin of 580x380x350mm with Flat White P.V.C automatic flushing cistern, of approved make with fittings, C.I./M.S. brackets, standard size of C.P. brass flush pipe, spreaders with unions and clamps complete, (all in C.P. brass) with waste fitting as per IS:2556, C.l trap with outlet grating and other couplings in C.P brass including painting of fittings and brackets, cutting and making good the walls and floors wherever equired. Range of three half stall urinals with 10 litre white P.V.C automatic flushing cistern of approved quality.

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required .

Kitchen sink with drain board 510x1040mm bowl depth 225mm( Dry canteen/ kitchen).

Providing and fixing , testing and commissioning of C.P brass single hole sink mixer with CP wall flange, swinging spout complete as required and making good as per direction of Engineer-in Charge

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931( 15 mm nominal bore) Make Hindware , Jaquar ,Parko or equivalent .

Providing and fixing Stainless Steel robe hook fixed to wall/ door with plastic rawl plugs and C.P brass screws including cutting and making good the wall wherever required as per direction of Engineer-in charge.

Providing and fixing stainless steel soap dish holder with all fittings and fixtures of approved make (complete) of approved make..

Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. compete as per directions of Engineer-in charge.

Providing and fixing 600x450mm beveled edge mirror of sperior glass (of approved quality) complete with 6mm thick hard board ground fixied to wooden cleats with CP brass screws and washers complete.

Providing & fixing stainless Steel towel rail with all fittings and fixtures of approved make (complete) of approved make.

Providing and Fixing stainless Steel towel ring round of approved make of Jaquar, Cera or equivalent.

Providing and Fixing 600120x5mm glass shelf with edges round of supported on anoised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc complete.

Providing and fixing toilet paper holder stainless Steel .

Providing and fixing 15MM dia C.P. brass Bib cock of approved quality conforming to IS: 8931 standards and weighing not less than 690 gms.(make of Jaquar, Cera or equivalent).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(make of Jaquar, Cera or equivalent).

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 89319(15 mm nominal bore) make of Jaquar, Cera or equivalent.

Providing and fixing G.I. pipe to IS: 1239 (Heavy class) with G.I. fittings upto 150 mm dia & above shall be M.S.7 mm thick conforming to I.S. : 3989 including synthetic enamenl paints of approved quality & shade over a coat of approved priming coat (shade as per colour code) and clamps and flanges including cutting and making good the walls complete. For rising mains, suction and delivery headers. ( Internal work - Exposed on wall)

15 mm dia nominal bore of heavy class

20 mm dia nominal bore of heavy class

25 mm dia nominal bore of heavy class

32 mm dia nominal bore of heavy class

40 mm dia nominal bore of heavy class

Providing and fixing of Brass Check Valve of approved make complete. 25mm

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design.

Inside size 90x80 cm and 45 cm deep including C.l. cover with frame (light duty) 455x610 mm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate.

Providing and fixing PVC pipes 6kg/cm2 pressure excluding pvc fittings, jointing with adhesive/seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion of approved make Supreme/Finolex/ Astral or equilant.

110 mm dia

80 mm dia

160 mm dia

Providing and fixing PVC plain Bend of approved make Supreme/Finolex/ Astral or equilant complete.

110 mm dia

160 mm dia

Providing and fixing PVC Floor Trap of approved make Supreme/Finolex/ Astral or equilant complete.

110 mm X 80 mm

160 mm X 110 mm

Providing and fixing PVC Plain Tee of approved make Supreme/Finolex/ Astral or equilant complete.

110 mm X 80 mm

Providing and fixing PVC Door Bend of approved make Supreme/Finolex/ Astral or equilant complete.

Providing and fixing PVC Door Tee of approved make Supreme/Finolex/ Astral or equilant complete.

Providing and fixing PVC Coupler of approved make Supreme/Finolex/ Astral or equilant complete.

Providing and fixing PVC Clamps for pvc pipes of approved make complete.

Providing and fixing PVC Cowl of approved make complete.

Providing and fixing C.P Jali of approved make complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (1000 ltr. Capacity 15 No.).