CONSTRUCTION OF NEW PWD REST HOUSE IN DISTT. SIRSA (PDG. CCTV CAMERA, LAN SYSTEM, FIRE ALARM SYSTEM PA SYSTEM, AUDIO VIDEO SYSTEM ONLY)

Amount

CCTV SYSTEM:- SITC of Dome Camera lmage device/ Sensor - 1/3" Progressive Scan CCD / Progressive Scan CMOS or Better Resolution - 2 Megapixel (1920 x 1080) or better Frame rate Up to 30 fps or better Lens Type - 3 to 9 mm auto varifocal lens Motorized IR Light & Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - >50db Minimum lllumination - 0.3Lx Color; lR LED ON 0 .0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265,H.264,M-JPEG Camera should have Multiple Streaming- Min. Triple Storage - SD Card slot should be expandable up to 128 GB System Compatibitity - ONVlF Profite S&G Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digitat Noise Reduction on/off. WDR -120dB WDR Atarm Input/Output - 1 Alarm Input, 1 ALarm OutPut Audio Input/Output - 1 audio input/1 audio outPut Environment Operating Environment – lndoor/ Outdoor Operating Temperature -0C to 50 c lngress protection & vandaI resident standards - lP67or better and IK10 or better Certificates: UL, FCC, EN Approved makes : Axis / Bosch / Honeywell/ Pelco.

SITC of Bullet Camera lmage device/ Sensor - 1/3" Progressive Scan CCD / Progressive Scan CMOS or Better: Resolution - 2 Megapixel (1920 x 1080) or better Frame rate Up to 50 fps or better Lens Type - 3 to 9 mm auto varifocal lens Motorized IR Light & Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - >50db Minimum lllumination - 0.3Lx Color; lR LED ON 0 .0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265,H.264,M-JPEG Camera should have Multiple Streaming- Min. Triple Storage - SD Card slot should be expandable up to 128 GB System Compatibitity - ONVlF Profite S&G Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digitat Noise Reduction on/off. WDR -120dB WDR Atarm Input/Output - 1 Alarm Input, 1 ALarm OutPut Audio Input/Output - 1 audio input/1 audio outPut Environment Operating Environment – lndoor/ Outdoor Operating Temperature -0C to 50 c lngress protection & vandaI resident standards - lP67. Certificates: UL, FCC, EN Approved makes : Axis / Bosch / Honeywell/ Pelco.

SITC of IP IR PTZ Dome Camera PoE Enabled (High Definition): lmage device/Sensor - 1/3" Progressive Scan CCD/ Progressive scan CMOS or better Resotution - 2 Megapixel, 1080p (1920x1080) or better Optical Zoom 30X & Digital Zoom: 12X lR Light & Distance - lR range up to 150 Mtrs. Or better Signal to Noise Ratio - >_50 dB (AGC OFF ) PAN & Tilt travel - Pan 360 endless Tilt 0 to -90 (Auto Flip) Minimum lIIumination - 0.3Lx Color and B/W 0.01Lx Day Night - Auto Day/Night with Auto lR-CUT fitter with auto switch Encoding Video Compression - H.265 MJPEG Triple Stream encoding Frame Rate - Main Frame 30 FPS in all resolution or better Audio Compression - G.711/G.726 Storage - SD Card shoutd be expandabte up to 128 GB Protocols - lPv4/lPv6, TCP/lP, UDP, RTP,RTSP, HTTP, HTTPS, ICMP,SMTP, NTP, DHCP, UPnP, IGMP,SNMP,IEEE 802.1 X System Compatibitity - ONVlF Profite S & G Privacy Zone - Minimum 4 Privacy zones or higher Additional Features Noise Reduction-Digitat Noise Reduction on/off . WDR -90dB True WDR or better Alarm Input,/ Alarm Output-1 Alarm Input, 1 Alarm Output Audio Input,/ Audio Output-1 Audio Input, 1 Audio Output Environment- Operating Environment-Outdoor Operating Temoerature- 0'C to 50'C lngress protection lP66 or better. Certificates: UL, FCC, EN. Approved makes : Axis / Bosch / Honeywell/ Pelco.

SITC of Network Video Recorder 32 Channel Network recorder With 16 TB HD to a maximum of 32 IP cameras,The recorders can be installed with a maximum of 2 internal HDDs for video storage. Option of a 2 HDDs for storage, Max. capacity per HDD: 4 TB. 1 no. E-SATA supported. The recorders comes with a built-in PoE+ switch as an option. 16 alarm i/p & 6 relay o/p. Simultaneous 1/4/9/16 channels playback. H.265/H.264/MJPEG supported. iPhone/Android support. Maximum incoming bandwidth of 320 Mbps. Maximum recording bandwidth of 320 Mbps. 1 I/O for audio. 1 VGA & 2 HDMI outputs. CE, UL & FCC certified Approved makes : Axis / Bosch / Honeywell/ Pelco.

SITC of L2 switch with 24 x 1G Base T Port PoE+ with 2 RJ45/SFP combo port and 2 x 1/10G SFP+ .The switch must be stackable upto 4 Units SFP Should be from the same OEM .Switching Capacity should be 90 Gbps or more with not less than 135 Mpps Throughput Switch should have 1GB Flash and 1GB RAM The switch must support minimum 16K MAC address entries and 4K VLAN with latency of less than < 4 µs 802.1AB, LLDP-MED, NTP, DHCPv4 and DHCPv6, ISSU, 802.1D, 802.1W, PVST+, 802.3ad/802.1AX, MVRP Same switch should work with onpremise NMS and Cloud based NMS without change in software and hardware. It should also support automation using JSON, Restful web services and MIB Static Routing for IPv4 and IPv6, Support NAC solutions from all leading vendors, 802.1x, Captive portal, SSH with PKI, TACACS+, Radius, LDAP, ACL, BYOD onboarding using all leading vendors IGMP v1, v2 and v3 snooping with 1000 Multicast groups, UDLD, MLD Snooping, SPQ and WRR, Eight hardware based queues per port, ARP, Mac address lockdown & Learned port security The switch must support Web-based Management (GUI), SSH v2, SNMP v1, v2 and v3, File upload using TFTP, FTP, SFTP or SCP over Ipv4 and Ipv6 Should support Perpetual PoE to power IoT devices during restart with support for following standards - 802.3af, 802.3at and 802.3bt Switch shall conform to following standards- UL 60950-1 or IEC 60950-1 or CSA 60950-1 or EN 60950, - EN 55022, EN 55024:2010, EN61000-3-2, Class A/B or CISPR22 Class A/B or CE- IEC 62368-1:2018- Certified for EAL 2/NDPP or above Vendor to be present in Gartner Magic Quadrant 5 Years from OEM with Toll free number for support in India. Make:Cisco/Alcatel/Juniper.

SITC of 43" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: Sony/Panasonic/Samsung

SITC of 1 KVA UPS with 1 hour backup on line with Suitables AH batteries. Make: Microtek / Luminous / APC / Elnova )

SITC of CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m onforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 Make Dlink/Siemon/Systimax

SITC of 24-port 19" 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19" 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make (Dlink/W-BOX/Seimon)

SITC of CAT 6 UTP Cable.Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC Lbp 69% required with certification report Make: R&M/AMP/Molex.

SITC of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells

LAN & EPABX: Supply Installation Testing & Commissioning of 24 Port Switch Make:Cisco/Juniper/Alcatel L2 switch with 24 x 1G Base T Port PoE+ with 2 RJ45/SFP combo port and 2 x 1/10G SFP+ . The switch must be stackable upto 4 Units SFP Should be from the same OEM . Switching Capacity should be 90 Gbps or more with not less than 135 Mpps Throughput Switch should have 1GB Flash and 1GB RAM The switch must support minimum 16K MAC address entries and 4K VLAN with latency of less than < 4 µs 802.1AB, LLDP-MED, NTP, DHCPv4 and DHCPv6, ISSU, 802.1D, 802.1W, PVST+, 802.3ad/802.1AX, MVRP Same switch should work with onpremise NMS and Cloud based NMS without change in software and hardware. It should also support automation using JSON, Restful web services and MIB Static Routing for IPv4 and IPv6, Support NAC solutions from all leading vendors, 802.1x, Captive portal, SSH with PKI, TACACS+, Radius, LDAP, ACL, BYOD onboarding using all leading vendors IGMP v1, v2 and v3 snooping with 1000 Multicast groups, UDLD, MLD Snooping, SPQ and WRR, Eight hardware based queues per port, ARP, Mac address lockdown & Learned port security The switch must support Web-based Management (GUI), SSH v2, SNMP v1, v2 and v3, File upload using TFTP, FTP, SFTP or SCP over Ipv4 and Ipv6 Should support Perpetual PoE to power IoT devices during restart with support for following standards - 802.3af, 802.3at and 802.3bt Switch shall conform to following standards- UL 60950-1 or IEC 60950-1 or CSA 60950-1 or EN 60950- EN 55022, EN 55024:2010, EN61000-3-2, Class A/B or CISPR22 Class A/B or CE- IEC 62368-1:2018 - Certified for EAL 2/NDPP or above Vendor to be present in Gartner Magic Quadrant 5 Years from OEM with Toll free number for support in India

Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of 2-port with dust cover faceplate including back box and all other accessories As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of Cat6 Patch Cords - 1Mtr -Blue ( Data Rack Side), As per specification. Make & Model: R&M/AMP/Molex.

Supply Installation Testing & Commissioning of Cat6 Patch Cords - 2Mtr -Blue ( Data Field Side), As per specification. Patch cord should have provion of lock with information outlet port. Make & Model: R&M/AMP/Molex.

Supply Installation & Commissioning of 9U Rack for Network Switch with all necessary accessories, civil, electrical works & peripheral items. Make & Model: Valrack/ Netrack/ Comrack.

SITC of 24 Port Layer 2 POE Access switch Make: Cisco/Alcatal/Juniper. Switch should have 24-port 10/100/1000 Base-T (Auto Uplink on all ports) and 1x USB port for external USB flash Switch should have 4-Port 100/1000 SFP slots/Ports should work simultaneously along with 24 Nos of 1G Base T port Switch should have Minimum 65Gbps Switching Capicity and 50 Mpps Forwarding rate. Switch should support min 16K Mac address or More. Switch should support min 2500 Active VLAN. Switch should support IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3bz, IEEE 802.1ba, IEEE 802.3x full-duplex flow control, IEEE P802.1Qaz Switch switch support IEEE 802.1D Spanning Tree Protocol, IEEE 802.1W Rapid Spanning Tree Protocol, IEEE 802.1S Multiple Spanning Tree Protocol, IEEE 802.3ad static or dynamic link aggregation (LACP), G.8032 Switch should have QOS and Q-in-Q from day 1. Switch should have IGMP Snooping, MLDV1/MLDv2, IGMPV1/v2/v3 from day 1. Switch should support Jumbo Frame Support (up to 9 KB) SNMP v1, v2c, v3,RFC 1643 Ethernet Interface MIB, RFC1493 Bridge MIB IEEE 802.1Q Tag VLAN, IEEE 802.1v: VLAN classification by Protocol and Port, IEEE 802.1p (Class of Service), DiffServ, 8 Queue per port, Layer 2/3/4 Access Control Lists (ACLs) Switch should support static routing and PBR from day 1. Switch should support atleast 1000 Multicast entries and Ingress Access list Rules. Switch should have MAC and 802.1 X based Login, Fallback to local authentication database (MAC and Web-based methods), Access Policies for Telnet/ SSH-2/SCP-2 Switch should support MAC Address based Lockdown and Limited Learning. Switch should support DHCP client function,Port mirroring (many-to-one), Application Telemetry, Auto denial-of-service (DoS) prevention Following in-band management methods shall be available: Web based management (On http or https), SSH based management (SSH v2). Following out-of-band management methods shall be available: Console port and Out of Band Management Ethernet Port. AAA using RADIUS/TACACS+ must be available Syslog shall be supported with multiple syslog destinations for Log Management. Shall support Netflow/ IPFIX/ sflow or equivalent for flow exports. Time synchronization using Network time protocol must be available. Switch Should support RMON 4 Group. Mean time between failures (MTBF): 500,000 hours Operating temperature: 32° to 113°F (0° to 45° C) Storage temperature: -40° to 158°F (-40° to 70° C) Operating humidity: 10% to 95% maximum relative humidity, non-condensing Certifications:- FCC CFR 47 part 15 Class A, EN 55032 Class A, RoHS, WEEE, EN 55024, UL 60950-1, EN 60825-1Class 1, CE 2.0, IEC 61000-4-5 /EN 61000-4-5, IEC/EN 61000-4-11, EN 300386, IEC 62368-1 All the switches, the fiber modules should be from the same OEM for seamless integration with existing running network and infrastructure. The OEM should have 24x7 TAC center with L1, L2 and L3 Support. OEM should have India toll free number reflected on official website. Switch should have 2 Year NBD 24x7 Tac support.

SITC IP-Phone with 2 SIP lines support POE and required external POE adaptor for the same.Phone has caller ID screen with call forwarding feature. Make Matrix/Alcatel/Unify.

SITC IP-Phone with 1 SIP lines support POE and required external POE adaptor for the same.Phone has caller ID screen with call forwarding feature. Make Matrix/Alcatel/Unify.

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material requiredto complete the job in all respect to the entiresatisfaction of Engineer-in-Charge of work. 25 mm dia

SITC of Flush mount Chairman unit for digital conference system should have removable gooseneck microphone in,The Unit shall be flushed mounted on the able and shall have Microphone socket for pluggable Microphone, request switch, Low Level Loudspeaker. All the module shall be pluggable type, and connected to Digital Interface Unit. Provision shall be made so the unit can be click-to-fit mounted in combination with couplings and end caps in wooden surface, XLR connection with hidden lock, Flush mounted Priority button to override delegate units. Priority key shall generate an optional chime tone to sound while temporarily or permanently muting all active delegate units. The chairman microphone remains active as long as the priority button is pressed.Red Microphone on indicator (active mic), Green request indicator (request-to-speak accepted, in waiting),Yellow color for VIP microphone indication,Low susceptibility to mobile phones,Uni-directional microphone on adjustable stem,system is required with all accessories (cable etc). Make: Beyerdynamic Model MCS-D 3823/BOSCH Model (DCN-DDI+DCN MICL+DCN FMIC+DCN-FMICB+DCN FPRIOB)/Brahler Model (CChair Mic Control, CMic LS, CMic Mic, TMD/01, Desk 2 Frame).

SITC of Flush mount Delegate unit for digital conference system, removable gooseneck microphone in the Unit shall be flushed mounted on the table and shall have crophone socket for pluggable Microphone, request switch, Low Level Loudspeaker. All the module shall be pluggable type, and connected to Digital Interface Unit. Provision shall be made so the unit can be click-to-fit mounted in combination with couplings and end caps in wooden surface. The microphone should be with following feature: Microphone on/off button,Green request indicator (requestto- speak accepted, in waiting),Yellow color for VIP microphone indication,Low susceptibility to mobile phones,Uni-directional microphone on adjustable stem,system is required with all accessories (cable etc) Make: Beyerdynamic Model MCS-D 3821 Bosch Model (DCN-DDI+DCN MICL+DCN FMIC+DCN-FMICB+DCN-FEC+DCN FCOUP) / Brahler Model (CCMic Mic Control, CMic LS, CMic Mic, TMD/01, Desk 2 Frame)

SITC of • One single controller has the facility to connect 245 wired conference delegate units, conference chairman unit etc. providing audio conference using system bus. • Manual mode of operation of audio conference with facility for automatic mode as camera control, hall display, voting control. • Menu guided programming on the unit as well as facility to modify/program using PC control console. • Diagnostic feature to test all connected units. • Shall have inbuilt digital processing and control/transmission of digital audio signals. • Shall include provision for upgrading to add interpretation facility without changing the control unit. • 2 x 16 character LCD display for status information and configuration. • Basic simultaneous interpretation function with as many as 31 language channels plus one floor channel. • Stand-alone automatic camera control with HD camera integration. • Extended conference facilities when using control PC software or remote controllers. • Adjustable sensitivity for the audio inputs•

Supply, installation, testing and commissioning of Handheld Wireless Mic system that has a min of 14-hour battery life from two AA alkaline batteries. Cardiod polar pattern,Dynamic microphone ,frequency response 83Hz-18kHz,RF sensitivity < 1.0 Uv,Image rejection>55dB,Dyanmic range >95dB and receiver having 30 channels possible,S/N ratio >100dB A,dynamic range >95db B,distortion <1 %,frequency band:618-634MHz,modulation:+/-40kHz Make: Bosch EV/ Sennheiser/Shure.

SITC of Ceiling Loudspeaker Rated power 24 or Better Watt. Maximum power 30 Watt. Sound pressure level 1 kHz oct, 1 W, @1 m 90 dB (±3 dB) .Effective frequency range 70 Hz to 20 kHz. Co-axial full-range speaker with poly cone tweeter. Simple power tappings at full, half and quarter power. Power taps at 100 V 24 W – 15 W – 7.5 W or Better . 100 hours PHC (Powering Handling Capaclty) test in acc. to IEC 60268-1&5. SAFE (Simulated Acoustic Feedback Exposure) test to withstand 50 sweep runs of square wave from low frequency to high frequency at twice the rated power, simulating feedback situation. Make: Bosch Model LBC 3099/41 /JBL Control 24CT / Martin Audio Model C4.8T.

SITC of Power over HDBaseT/HDMI via Single CAT5e/6 Extender, UHD/4K, Full Buffer, Up/Down IR/RS232, Support HDCP 2.2, also support Digital Audio Dolby Pro, Dolby Atmos & Dolby Digital along with Amalog Audio as well. Make : Extron / Kramer/AMX/ Key Digital.

SITC of • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length • power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply • Signal Extension: Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling. Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant • HDR (High Dynamic Range): More life-like images through a greater range of luminance levels • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit • 3D: Support for standard 3D stereoscopic signal formats • Low Profile: Super slim chassis design • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx • Make : Extron / Kramer/AMX/ Key Digital.

SITC of Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices • Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio • CEC Support: For inter-device control between input and output HDMI channel • I2C Communication: EDID and HDCP authentication to Display and Source • Control System Support: Fully controllable by all RS-232 supported control systems Make : Extron / Kramer/AMX/ Key Digital.

SITC of Wireless Presentation Solution VIA GO gives iOS, Android, Chromebook, PC, and Mac users instant wireless connectivity with advanced presentation capabilities. The product features content streaming with crystalclear mirrored images and stunning video playback and includes iOS, Windows and Android mirroring. VIA GO is easy and flexible to install with both builtin WiFi and LAN connectivity and includes industryleading 1024bit encryption for secure use on the internal network .Wi-Fi Band Support - 2.4GHz (Access Point mode), 2.4GHz/5GHz (Client mode). 60fps Streaming Multimedia - Share HD wireless video streaming (using the VIA app Multimedia feature). Supports up to 6Mbps video bit rate when using the builtin WiFi module in Access Point mode. I/O: 4 USB 3.0, 1 LAN on an RJ45 connector. GRAPHIC OUTPUTS: 1 HDMI, 1 mini DisplayPort, support up to 1080p60 (using the VIA app Multimedia feature) / WUXGA resolution. AUDIO OUTPUT: 3.5mm mini jack for HP/speakers. PROCESSOR: Intel® Braswell CPU, Dual Core 1.04GHz. MAIN MEMORY: 2GB, highspeed. STORAGE: eMMC, 32GB. LAN: Gigabit LAN. WIRELESS COMMUNICATION: Intel dualband wireless 802.11ac model 3160NGW. AUDIO: Analog or embedded HDMI Make : Extron / Kramer/AMX/ Key Digital

SITC of 4K 98-inch / 16:9 Screen Size (Diagonal) / Aspect ratio. Panel Type IPS Panel - D-LED . Resolution (H x V) 3840 x 2160 pixels. Brightness 500 cd/m² . Native Contrast Ratio 1300:1 or better. Response Time (milli seconds)8 . Inputs : HDMI 3 VGA Port 1 Display Port 1 DVI Port 1 USB 3 RJ 45 1 Audio IN 1 Communication Port RS 232 1 OutPuts : HDMI 1 Audio 1. Audio Power 20 W ( 10 W X2). Auto Wake up on Input detect. Customised Start Up Logo. Auto sleep function. USB Media Player. Wifi internal/external with Wifi dongal. Make Panasonic/Samsung /Christie.

SITC of 55"/139.7cm. LCD native resolution • UHD 3840 x 2160 (16:9). LED lifespan • 50,000 hours to 50% brightness. pixel pitch • 0.315 x 0.315mm. nominal bezel size (bottom/side/top) • 14mm/11mm/11mm. brightness • 400 nits (cd/m2) typica contrast ratio (full field) • 1200:1. color space (CIE 1931) • 68% typical. display colors • 10 bit, 1.07 billion colors. Video inputs • 2 x HDMI (Ver 2.0, HDCP 2.2) • DisplayPort (Ver 1.2a, HDCP 1.3) • VGA • YPbPr • 2 x USB 2.0 • USB 3.0. Video outputs • DisplayPort 1.2a; HDMI 2.0 . Audio inputs • RCA (L/R) line in. Audio outputs • RCA (L/R) line out • 3.5mm headphone jack • SPDIF coax. Control inputs • RS-232 (D-Sub9) • LAN (RJ45) • IR wire extender . Environment operating temperature • 32-104°F (0-40°C) storage temperature • -4-140°F (-20-60°C) operating humidity • 20-90% RH non-condensing. Features • Commercial grade LCD with LED backlight • OPS slot • Anti-glare treatment • 2 x 8W speakers • On/off scheduler. • USB playback of Photo/Video/MP3 • HDMI-CEC • Source switching for failover • Kensington lock • Wi-Fi® • Bluetooth. • USB playback of Photo/Video/MP3 • HDMI-CEC • Source switching for failover • Kensington lock • Wi-Fi® • Bluetooth. • Miracast device connectivity • Pixel shifting Approved Makes: Christie/ Samsung/ Panasonic.

SITC of Pneumatic Desk top Plug Connection Panel having 1 nos network ports, 1 no. VGA port, 1 no. 5 amp AC socket, 1 no. audio port and 1 no. HDMI port Make: Extron / Kramer/AMX/ Key Digital.

SITC of Switch with Power on Ethernet (PoE) enabled, with 8 nos. 10/100 base Tx PoE port, 1 no. dual personality Gbe Port for copper/fiber uplink, Make: Cisco/Extreme / Juniper.

SITC of HDMI cable in existing pipe/ channel connectors at both ends complete in all respect. Make : Extron / Kramer/AMX/ Key Digital.

SITC of Composite Audio Cable multi Stranded 2 Core double insulated. complete on all respect. Make:- CHETAN/ ASIAN/ DEEPCAB.

SITC of 2 Core, 1.5sq mm Speaker Cable For Loudspeakers Make: Havells/Polycab/ Finolex.

SITC of 3 Core, 1.5sq mm Power Cable For Loudspeakers Make : Havells/ Polycab/Finolex.

SITC of MK Channel NCT 1050 ( 100mm x 50mm ) Complete the job in all respect upto entire satisfaction of the Engineer -in-charge of work.

SITC of 22U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack.

Fire Alarm System: SITC of Micro processor based 2 wire fault tolerant, networkable type fire alarm / detection control panel ( having nos. of loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 character L C D unit/ 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80LED Indicators. The Panel shall have 3 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt SMF lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS/ as per specifications complete in all respect up to the entire satisfaction of Engineer-in – charge of work Makes : Bosch FPA 1000 Series ,Cerberus by Siemens,Honeywell Morley Zxe Series).

SITC of addressable multisensor detector with a combination of Optical and Thermal including mounting base, auto addressing feauture as required. Detetctor should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. EMC safety for detector shall be 50 V/m. Shall be EN54/ VDs/UL certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module after 20 devices) (Makes: Bosch FAP-440-T+FAA-440, Siemens Cerberus OH921+DB-11, Honeywell Morley MI-PTSE+B501 ).

SITC ofaddressable Heat detector with fixed and rate of raise feature including mounting base with LED… etc. complete as required. Each Detector should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. EMC safety for detector shall be 50 V/m. Shall be EN54/ VDs/UL certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) (Makes: Bosch FAH-440 + FAA-440 , Siemens Cerberus HI921+DB-11, Honeywell Morley MI-RHSE+B501 )..

SITC of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliat to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer – in Charge of work. (Makes: Bosch FMM-325A-D,Siemens Cerberus HMS-S, Morley MI-MCP, )

SITC of Addressable Loop powered sounder with strobe / flasher complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer – in Charge of work. Makes Bosch /Siemens Cerberus / Morley.

SITC of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour & material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work Make PES/Giolite/OMEX.

SITC of Addressable Control Relay Module with flexible network structures with a maximun switching current of 1A @ 30V DC. Shall be EN54/UL/VDS Certification Makes :Bosch /Siemens Cerberus / Morley.

SITC of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/ voltage monitoring shall be EN54/UL/VDS approved. (In case of 2 monitoring features in one module (points) each point shall be consider separately for payment). Makes: (Bosch FLM-325-2I4, Siemens Cerberus HTRI-M, Morley MI-DMM).

SITC of UL/EN54/LPCB listed and FM Approved Line Isolator for Isolating the section of circuit in case of short in the addressable Loop wiring Makes :Bosch /Siemens Cerberus / Morley.

SITC of minimum 1000 Mtr. Range Siren generatorprovided at the roof of the building with separate power suppl, relay etc. with all accessories required to complete the job in all respect up to the entire satisfaction of engineer incharge. Make: National/Kheraj .

Supply, Installation, Testing & commissioning of Wall Mount Speaker with operation 12 Watts Make Honeywell/BOSCH/Henrich.

SITC of PVC unsheathed s/c stranded ( ISI marked ) copper contuvtor cable 1100v grade in existing pipe excluding cost and erection of pipe but including connection etc. with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer – in charge of work MAKE FINOLEX/ POLYCAB/ HAVELLS. PVC unsheathed copper size 1.5 sq mm single core

SITC of 2 core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc.Make Finolex/Polycab/havel's.

SITC of 17 U Standard rack to place all Av equipment Make Valrack, Comrack,HCL.

Insat Techno Services

Netromics Engineering Solutions Private Limited